Displaying 20 results from an estimated 73 matches for "stairing".
Did you mean:
staining
2004 Apr 10
4
Woodpeckers Revisited
Just when I thought I couldn't be wrong, I was wrong. We have
woodpeckers that drill into the arial telephone cables, and water seeps
through the holes and partially grounds the tip and/or ring wires
causing hum. I thought the hum/buz on my lines was a telco problem.
The Qwest HQ noise team assures me that my lines are within spec. Sure
enough, when I listen on the test set the lines
2002 May 23
4
3.2.3p1 on OpenServer
Hi All,
I compiled the 3.2.3p1 source on SCO OpenServer 5.0.6. When a client connects to it now, they get stair-stepping everywhere. Issuing an stty sane resolves the issue for that login.
For bug 245 in 3.2.2p1, the call to setsid() is sshd.c was bypassed due to problems it was causing with Solaris. However, by allowing this method to be called, the stair-stepping goes
away.
Thanks,
Greg
2008 Apr 21
5
Cleaning up a WINE install.
I was installing a game, and I made the mistake of agreeing to install
DirectX. I'm guessing this can screw up your WINE. Is there any way to
clean up my WINE after doing something like that without having to
reinstall all my software?
Owen Stairs
2007 Feb 26
2
how to fill between 2 stair plots
Hi all,
I want to create a simple plot with 2 type='s' lines on it:
plot(a, b, type='s')
lines(x, y, type='s')
I wish to then fill the area between the curves with a colour to
accentuate the differences eg col=gray(0.95). I cant seem to come up
with a simple method for this. Any pointers in the right direction much
appreciated.
Cheers
Scott
2008 Apr 22
4
Installing Windows Drivers in WINE
I thought I read somewhere that it was actually possible to install
Windows drivers in WINE. I'm only asking because I have a Radeon 8500
on my sister's Linux box, and the Linux drivers really suck. I actually
can't even install the proprietary drivers, they are so out of date.
Is this possible?
Owen Stairs
2008 Nov 20
4
Dequantizing
I have some data measured with a coarsely-quantized clock. Let's say
the real data are
q<- sort(rexp(100,.5))
The quantized form is floor(q), so a simple quantile plot of one
against the other can be calculated using:
plot(q,type="l"); points(floor(q),col="red")
which of course shows the characteristic stair-step. I would like to
smooth the quantized
2011 Jul 21
2
[LLVMdev] share between AST and IR?
...variables and functions. I'm wonder if there is a way to
save/flag/metadata these so later on at the IR level I can use this
information in a Pass.
As far as I can tell nothing currently would allow me todo this and I'm
wondering what exactly it would take to do something like this. After
stairing at the ode for awhile I'm not even really sure where to begin or
what the key files are.
Any advice?
Thanks you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20110720/4ef26aee/attachment.html>
2009 Mar 22
2
Playing Gamemaker 6 and 7 games on OSX?
I have recently gotten back into making a games with gamemaker. I had a big game that I didn't finish on my old computer running Windows XP. But then my stupid sister dropped my laptop done the stairs. That was about 2 months ago, and I got a new laptop running OSX because my parents hate Windows (while I love it). I was looking through a flashdrive with my stuff from my old laptop on it
2006 Jun 12
2
Ruby on Rails Copenhagen Meetup
Hi Railers
If you are in the Copenhagen area on the 29th of this month (that''s a
Thursday) Jesper and I would be glad to see you at Caf? Selina in the
central Copenhagen for the first of many Ruby on Rails meetups.
We start at 20:30 hours and have of cause arranged for free beer and
complementary WiFi.
Our goal is to create an inspiring atmosphere where railers (new and
old) can
2002 Feb 21
8
newbie
hi all
am new to this list
my problem is i connect to a windoze printer and execute a print job using print but the printed matter is horrible...
i get only a single line in the printout...
what should i do..
sorry if this question is silly
2004 Sep 15
1
video source
In order to experiment with the theora encoder, I bought a mini-DV camcorder a
couple of weeks ago; a Panasonic PV-GS9 for $250. I wanted a mini-DV because
it is claimed that capturing video from the camcorder to a computer over a
firewire cable results in an exact copy of the recorded video.
That was not my experience. The video I captured to my computer over the
firewire cable, using both
2009 Feb 03
2
ThinkCell type waterfall charts in R?
Hi all,
with PowerPoint and ThinkCell one can draw something they call waterfall
chart and it looks like this:
http://www.think-cell.com/products/images/waterfall.gif
I found discussions on waterfall charts in the archive of this
mailinglist, but unfortunately they looked totally different. Other
names for this type of plot seem to be bridge chart, cascade chart,
stair case chart, etc. but
2001 Apr 05
0
HP-UX 9 problems (hangs on logout; tty isn't sane)
I'm trying to get OpenSSH 2.5.2p2 to run on HP-UX 9.05. I've had some
decent results, but I'm also seeing some problems.
I'm using the EGD (I configured with --with-prngd-socket=/tmp/entropy).
* Compiling required some changes, which I've attached. Two of the
changes are "hackish", and not at all suited to inclusion in the
source tree, but they might point
2011 Jul 21
0
[LLVMdev] share between AST and IR?
...wonder if there is a way to
> save/flag/metadata these so later on at the IR level I can use this
> information in a Pass.
>
> As far as I can tell nothing currently would allow me todo this and
> I'm wondering what exactly it would take to do something like this.
> After stairing at the ode for awhile I'm not even really sure where to
> begin or what the key files are.
>
> Any advice?
> Thanks you
>
>
> _______________________________________________
> LLVM Developers mailing list
> LLVMdev at cs.uiuc.edu http://llvm.cs.uiuc.edu
>...
2003 Mar 12
1
plot() with type="s" and lty=2 (PR#2630)
Full_Name: Jerome Asselin
Version: 1.6.2
OS: RedHat Linux 7.2
Submission from: (NULL) (142.103.173.179)
In the following example, the line type lty=2 does not show properly
across the entire line.
x <- c(seq(0,.5,.001),seq(.6,1,.1))
y <- rep(1,length(x))
plot(x,y,type="s",lty=2)
Sincerely,
Jerome Asselin
2007 Feb 19
2
In Europe for the next week
Hi all,
As most probably know by now, I''ll be in London and Brussels for the
next week, starting Tuesday (well, I leave Tuesday but don''t arrive
until Wednesday). That means I''ll hopefully get to meet more of you
(I''m giving talks in London Thursday night and in Brussels, probably
on Sunday morning), but it also means I''ll have limited access
2012 Feb 07
6
my notes on bond, bridge, network, kvm, host and virtual so far
I put this page together just so I won't spam the board anymore begging
for help..lol
http://bobhoffman.com/vmissue.html
This shows a working effort of bonded eths, bridged into a vm, and a few
other things.
The only missing thing is something on the host that ends up putting the
VM internet
connection into some kind of limbo.
Whether it is hardware related, bug related, libvirt nat
2007 Aug 24
7
Can I do this in a template..?
Hi all,
I have a situation where I want to use the same template to create
two different files in two different classes. I''ve tried to lookup
some information on what is possible with templates, how advanced you
can get, but haven''t found much. I guess it''s one of the areas where
I should contribute to the docs - once I figured out what I can do,
that is...
2005 Mar 19
3
[Fwd: IceCast up to v2.20 multiple vulnerabilities]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hey all,
did you happen to see this recent post to bugtraq? If so, I apologize.
I haven't been keeping up with the archives since everything has been
running so smoothly. ;)
- --Stauf
- -------- Original Message --------
Subject: IceCast up to v2.20 multiple vulnerabilities
Date: 18 Mar 2005 22:31:14 -0000
From: Patrick
2003 Dec 19
2
Problems using The Ultimate Traffic Conditioner from the Cookbook
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
I''m absolutely new to tc and found The Ultimate Traffic Conditioner to be
exactly what I wanted as a starting point.
Now the script doesn''t behave as I expected though, which applies to both the
CBQ and HTB versions, the latter of which being my preference.
The only changes made to the script are these assignments: