search for: st2030

...----------------------------------------------------------- Tests were performed with latest (as of yesterday) asterisk 1.2 and 1.4 versions -- behaviour looks the same to me. Channels are two SIP user agents on the local LAN segment and one analog phone connected to a local FXS port: SIP/st2030, SIP/xten and Zap/1. Relevant part of dialplan is: exten => 200,1,Dial(Zap/1) exten => 202,1,Dial(SIP/st2030) exten => 203,1,Dial(SIP/xten) exten => 300,1,Queue(testQueue) exten => 502,1,Dial(SIP/st2030) Notes: - all extensions have a 2nd priority wich does Hangup()...

Hello, After reading all the docs and going through the menus, I still can't find the voicemail access button or menu sequence on the ST2030 (http://www.voip-info.org/wiki/view/Thomson+ST2030) Also I can't get phone provisionning through tftp to work. Configuration files are loaded but the phone seems to ignore them. Any idea?

Hi all, i'm trouble with codec setup on an asterisk machine 1.4.18 and some Thomson ST2030 as extensions. In the users.conf file for internal extension i have: disallow=all allow=g729 allow=alaw allow=ulaw Without any codec installed (i mean with original g729 of asterisk) all go fine, calling from an extension to one other: Peer User/ANR Call ID Seq (Tx/Rx) Form...

hi there, I saw a page on voip-info about the thomson ST2030 phone. There is not so much info on there, that's why I would like to raise a question here. Has anyone got hands-on experience with this phone? (with or without extension module) I am interested if it can be used (as SIP phone) in a good way with asterisk. (also, do all the functions behave...

Hello, I'm trying to upgrade a Thomson ST2030 phone froms its default 1.42 firmware to the latest version (1.56) through tftp. The phone loads the .inf file, then the correct firmware file (as stated in the ST2030S.inf), then it reboots and loops doing these same things again and again. The firmware version on the phone stays at 1.42. Is...

Hello, I am looking for a replacement for my Thomson ST2030SIP. My specifications are as follows : - 2 lines. - 6 BLF keys. - PoE. Can you give me a return on the models you use ? Thanks. Sil

Hi all, I am looking for phones witch support POE, with a good relation between quality and price to work with asterisk. I just see the Thompson st2030 and the Linksys SPA 922 an SPA 942. Witch of this phones or another ones gave you the best results in a productivity enviroment? Thanks in advance. VoipCrazy. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachmen...

Ishfaq Malik <ish at pack-net.co.uk> schrieb: > Do you have a link to the user guide for your exact phone model? Unfortunately not... I have a Thomson ST2022, but I can just find in Internet manual for the ST2030... Regards Luca Bertoncello (lucabert at lucabert.de)

Hi all, First of all I wanted to give my salutations to everyone in the list. In second hand, let's see if anyone may help me with a problem i've got. I bought a Developer Kit from Digium (TDM11B + ST2030 + Asterisk book) I installed a new server over Asterisk@home with the card plugged in it. Everything during the installation went fine. Now I connected the telephone wire (from the telephone company) into the FXO RJ11. The problem is that, using a X-Lite softphone SIP client i...

Hi, Is anyone aware of SIP Diversion header ? It seems currently supported by Comverse (formely NetCentrex) softswitch and some hardphones (Thomson ST2030). An old draft (draft-levy-sip-diversion-08.txt) mentions this header. ha I'm wondering if this could be used -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090327/46acaf32/attachment.htm

Hello, I'm using Asterisk 1.6.2.0 and I like to use escape characters with SendText, because I can just delete the message from my phone (Thomson Speedtouch ST2030) display by sending a return-char (\n). But \n is not escaped: I tried already: exten => 222, n, SendText(\n) exten => 222, n, SendText("\n") exten => 222, n, SendText('\n') exten => 222, n, SendText(`\n`) So how can I use escape characters in dialplan? TIA, Domin...

We're having a horrid problem with our asterisk setup. Sometimes calls just go dead - we can't hear what the other end is saying. (I think they can't hear us either). The call doesn't hang up until one of the callers gets bored. Internaly we use Thomson ST2030 SIP phones. Externaly we have 3 ISDN BRI lines (6 channels total), connected to an Eicon Diver server card (4BRI). We're using Asterisk 1.4.11 (1.4.11-BRIstuffed-0.4.0-test4) on a Debian system, with chan-capi 1.0.1. Any idea what could be going wrong, where to look &c?

Hello. Once again, I came up with a problem for which I can't seem to find a solution. I'm not able to make BLF work with Thomson ST2030 phones and Asterisk (1.2.13). I've set up hints in dialplan, as well as Subscibe keys on the phone. The LED status gets updated according to the associated line status. However, when a phone is ringing, If I try to pickup the call by pressing the flashing key on the Thomson phone, I get an er...

Hello, I've got strange problems trying to run asterisk with MGCP ip phones (Thomson ST2030). Situation: "user A" <----- pstn -------> ASTERISK <----- mgcp ------> "user B" "User A", connected behind a PSTN, tries to call "User B". After dialing "User B"'s number, call comes to ASTERISK, ASTERISK contacts "U...

...toncello wrote: > > Ishfaq Malik <ish at pack-net.co.uk> schrieb: > > > >> Do you have a link to the user guide for your exact phone model? > > > > Unfortunately not... > > I have a Thomson ST2022, but I can just find in Internet manual for the > > ST2030... > > The administrator manual can be found at: > http://www.manualslib.com/manual/909341/Thomson-St2020.html?page=5 > > To download click the green Download button at the top. Hi, Patrick! Thank you very much! Unfortunately I didn't found anything about BLF... Regards Luca...

Hi, I'm using a SIP phone (Thomson ST2030) which is able to display text received though Asterisk's SendText() application. I'm using this to display from Asterisk "Forwarded to 0123456789" whenever a user forwards his calls to another number or extension. Test is displayed with white letters on black background. What I...

Hi, RFC3680 defines a SIP event package for registration. This event package which can be used through NOTIFY-SUBSCRIBE methods, seems very useful for free sitting or presence applications. This package is supported in various SIP phones (at least Thomson ST2030) : when turned on, this feature adds a new login/logout menu among other things. It can also be used to send Welcome notices to mobile users : whenever a mobile user comes in, a SIP MESSAGE is sent by a software application which has previously subscribed to be notified of any registration event r...

Hi list! Finally I got my Asterisk works with my two phones... It was a problem on my Firewall (for the phone of my wife) and on my Dialplan (for forwarding calls). Now all works as expected, at least in the simulation I did with AsteriskNOW. Hopefully it will work later, when Deutsche Telekom changes my ISDN to VoIP... Well, now I have some time to spend with "fooling"... My phone

...nything) there is a way to send the 'music on hold' to the caller even with the asterisk send the call to the phone (autoanswer on) but the 'hold' button is already pressed? I have to search/manage the asterisk config or the phone one? We are using asterisk 1.2.1 with Thomson ST2030. this is the asterisk log: (...) -- Executing Queue("CAPI/ISDN4/********-ce", "coda_azienda|t| 3600") in new stack -- Started music on hold, class 'music', on channel 'CAPI/ISDN4/ ******-ce' -- agent_call, call to agent '1005' call on ...

...ialog,message-summary,check-sync,talk,hold Authorization: Digest username="7533", realm="asterisk", nonce="2a533466", uri="sip:pipo at 192.168.100.254:5060;user=phone", response="10d6fafe54a12319983a810938f55cd6", algorithm=MD5 User-Agent: THOMSON ST2030 hw5 fw1.64 00-1F-9F-16-22-AB Content-Length: 0 2. What could be a benefit a using SUBSCRIBEs over not using them ? Regards --0015174c3e9efbc9680464369f65 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hi,<br><br>From recent experiences with...