Displaying 20 results from an estimated 145 matches for "sstatus".
Did you mean:
status
2019 Jun 24
2
Issue with dvd/cdrom drive
...version 3.00 loaded.
[ 1.879093] ata1: DUMMY
[ 1.879096] ata2: DUMMY
[ 1.879099] ata3: SATA max UDMA/133 abar m524288 at 0xc5700000 port
0xc5700200 irq 136
[ 1.879102] ata4: SATA max UDMA/133 abar m524288 at 0xc5700000 port
0xc5700280 irq 137
[ 2.183682] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.183825] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7.183893] ata3.00: qc timeout (cmd 0xec)
[ 7.183908] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7.183960] ata4.00: qc timeout (cmd 0xa1)
[ 7.183974] ata4.00: failed to IDENTIFY (I/O er...
2009 Jul 26
2
SATA DVD Burner / AHCI / CentOS 4.7 (kernel: 2.6.9-78.0.22.EL)
...rq 58
Jul 26 16:29:27 sauron kernel: ata5: SATA max UDMA/133 cmd 0xF8874300 ctl 0x0 bmdma 0x0 irq 58
Jul 26 16:29:27 sauron kernel: ata6: SATA max UDMA/133 cmd 0xF8874380 ctl 0x0 bmdma 0x0 irq 58
Jul 26 16:29:27 sauron kernel: scsi1 : ahci
Jul 26 16:29:27 sauron kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 26 16:29:27 sauron kernel: ata1.00: qc timeout (cmd 0xec)
Jul 26 16:29:27 sauron kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104)
Jul 26 16:29:27 sauron kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 26 16:29:27 sauron kernel: ata1.00: qc tim...
2019 Jun 24
0
Issue with dvd/cdrom drive
>
> [ 2.183682] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 2.183825] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 7.183893] ata3.00: qc timeout (cmd 0xec)
> [ 7.183908] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> [ 7.183960] ata4.00: qc timeout (cmd 0xa1)
> [ 7.183974] ata4.00: f...
2019 Jun 24
2
Issue with dvd/cdrom drive
On Mon, Jun 24, 2019 at 3:35 AM Pete Biggs <pete at biggs.org.uk> wrote:
> On Sun, 2019-06-23 at 22:13 -0400, doug schmidt wrote:
> > Hi,
> > I'm having an issue with my Thinkpad P70 laptop/workstation. This system
> is
> > a dual boot,
> > windows 10 pro and centos 7. I have not needed to use the cdrom until
> now,
> > however the system does not
2013 May 21
0
Xen stops booting at "SATA Link down (SStatus 0 SControl 300)"
I''m trying to set up Xen 4.1 on Ubuntu 12.04 server (x64) and when booting
the dom0 it fails while apparently attempting to initialize the SATA
devices. It does find one device (ata3) but then just halts and hangs
apparently forever. Any suggestions as to what could be causing this, or
whether upgrading to 13.04/Xen 4.2 might fix the issue?
2007 May 04
1
CentOS 5 + Nforce 4 SLI Intel SATA problems
...heat problem, the
drives have a working fan directly blowing on the drives, and the case
its in has very good airflow.
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD000 irq 193
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD008 irq 193
scsi0 : sata_nv
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48
ata2.00: ata2: dev 0 multi coun...
2008 Apr 28
0
misdn, no free channels, similar to FAQ one
...exten => 202,n,Dial(mISDN/g:extern/230210)
[misdn]
exten => _X,1,Dial(IAX2/duritji)
exten => _X,2,Hangup
IAX2 phones are locally configured/connected. Debug for misdn is set to
0x3
When I dial from outside, mu console (lots of -vvvvv's:) gives:
Asterisk Ready.
*CLI> P[ 0] MGMT: SSTATUS: L1_ACTIVATED
P[ 1] MGMT: SSTATUS: L2_ESTABLISH
*CLI> P[ 1] set_channel: bc->channel:0 channel:1
P[ 1] I IND :NEW_CHANNEL oad:056230210 dad: pid:2 state:none
P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P...
2007 Apr 30
3
Slow performance
...red with a single 160 GiB OS drive (with
CentOS 5.0) and 4x500 GiB drives setup in a RAID-5 configuration. All
drives are setup for 3.0 GiB SATA link, and the motherboard also
supports that. Looking in dmesg when the system comes up, I see that
reflected as well:
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scs...
2008 Mar 11
1
Question on SATA DVD using centos 5.1
...these two drives are set as RAID1
SATA2: HD extra
SATA3: DVD
SATA4: external USB disk
Snip from dmesg shows the ATAPI device being detected.
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: PIONEER BD-ROM BDC-202, 1.01, max UDMA/66
ata3.00: configured for UDMA/66
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7: ST3500630AS, 3.AAC, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for U...
2008 Nov 29
24
pv_ops dom0 testing
I am trying to get a pv_ops dom0 working for testing,
but I am running into an elf_init error:
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_init: not an ELF binary
Full output attached.
>From what I have read on the mailing lists, it seems
that it is usually a problem with either grub or a
corrupt dom0 kernel.
Attached is my kernel config (2.6.28-rc6-tip).
I followed the instructions on:
2006 Jun 08
1
BN8S0 problem - Extension can never match, so disconnecting
...onet utility.
the card is configured with all lines in TE and P2P mode, and it is
connected with the special cable with an ISDN connection.
i've turned on debugging to level 4, this is the output from the
asterisk cli when i receive a call:
P[ 5] MGMT: Short status dinfo 1000001
P[ 5] MGMT: SSTATUS: L1_ACTIVATED
P[ 5] handle_frm: frm->addr:42000503 frm->prim:3f082
P[ 5] handle_frm: frm->addr:42000503 frm->prim:30582
P[ 5] set_channel: bc->channel:0 channel:1
P[ 5] I IND :SETUP oad:4656708 dad:465670127
P[ 5] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 5] --> facility:FA...
2007 Jul 09
2
ATA: abnormal status 0x7F on port 0xB887
...Q 58
PCI: Setting latency timer of device 0000:00:05.0 to 64
ata1: SATA max UDMA/133 cmd 0xC480 ctl 0xC402 bmdma 0xBC00 irq 58
ata2: SATA max UDMA/133 cmd 0xC080 ctl 0xC002 bmdma 0xBC08 irq 58
scsi0 : sata_nv
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/3...
2012 Dec 09
2
Problem with secondary sata controller
I am having problems getting my 64-bit Debian Squeeze (Xen version 4.0, Linux Kernel 2.6.32) dom0 to recognize a harddrive connected to a secondary sata controller. My motherboard is a Gigabyte GA-X79-UP4 and has two sata controllers. The first is controlled by an Intel X79 chipset and the second is controlled by a Marvell 88SE9172 chip. During the initial install of Debian everything is fine and
2011 Apr 30
3
Identifying physical disks
...sectors, and I should replace it. But which one of the
physical disks is sda??
The machine boots fine from either one of the disks, (and the booting
disk of course is always called sda).
In the messages log I see entries like this:
Apr 29 02:21:07 a134-224 kernel: ata2: SATA link up 3.0 Gbps (SStatus
123 SControl 300)
By noticing which SATA link (ata1, ata2) is up and which is down, I can
find out which physical disk is connected to ata1 and which to ata2.
If both disks are connected, will the hd in ata1 become sda, and the hd
in ata2 become sdb??
- Jussi
2013 Jul 22
7
[Bug 67161] New: Blank video after resuming from S3 or S4
https://bugs.freedesktop.org/show_bug.cgi?id=67161
Priority: medium
Bug ID: 67161
Assignee: nouveau at lists.freedesktop.org
Summary: Blank video after resuming from S3 or S4
QA Contact: xorg-team at lists.x.org
Severity: normal
Classification: Unclassified
OS: Linux (All)
Reporter: mauromol at tiscali.it
2007 Aug 04
2
HotPlug, eSATA, and /media
Ok, got a quickie.
I have an eSATA drive, a 750GB Seagate in an eSATA external enclosure, and a
Silicon Image sil3132 ExpressCard controller for my laptop. The disk and
controller work great in CentOS 5 (or F7, for that matter), if I specifically
mount it.
This is not how I want to have to use this drive, however. I want to hotplug
it; that is, plug the controller into the laptop, and then
2007 May 28
0
VT6420 sata_via problem
...tems
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: (BMDMA stat 0x24)
ata1.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: soft resetting port
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1.00: revalidation failed (errno=-5)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: soft resetti...
2006 Oct 27
2
asterisk misdn incoming line not working.
...lem is, I can't get asterisk to pick up the phone, outgoing calls work
fine.
when running asterisk with -vvvvvvvvvvvc I get the following "log" when I try
to dial the isdn server.
P[ 1] * Starting Ast ctx:kpn-in dad:0594643637 oad:0878722291 with 's'
extension
P[ 1] MGMT: SSTATUS: L1_ACTIVATED
== Starting mISDN/1-2 at kpn-in,s,1 failed so falling back to exten 's'
== Starting mISDN/1-2 at kpn-in,s,1 still failed so falling back to
context 'default'
Oct 27 01:28:42 WARNING[3514]: pbx.c:2357 __ast_pbx_run: Channel 'mISDN/1-2'
sent into invalid ex...
2014 Aug 20
6
[Bug 82843] New: [NV96][Regression][Bisected] Failure to resume
https://bugs.freedesktop.org/show_bug.cgi?id=82843
Priority: medium
Bug ID: 82843
Assignee: nouveau at lists.freedesktop.org
Summary: [NV96][Regression][Bisected] Failure to resume
QA Contact: xorg-team at lists.x.org
Severity: normal
Classification: Unclassified
OS: Linux (All)
Reporter: trevor.davenport
2010 Jun 03
2
Tracking down hangs
...irq 17, io mem 0xfd1fc000
[ 15.051204] usb usb3: configuration #1 chosen from 1 choice
[ 15.051228] hub 3-0:1.0: USB hub found
[ 15.051236] hub 3-0:1.0: 3 ports detected
[ 15.107086] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 15.119952] ata17: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 15.151896] ata17.00: ATA-7: HITACHI HDS7250SASUN500G 0648KPU78F, K2AOAJ0A, max UDMA/133
[ 15.151898] ata17.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 15.151905] ata17.00: max_sectors limited to 256 for NCQ
[ 15.153868] usb usb3: New USB device found, idVen...