search for: srikanth_w

Hi all, I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this, DEVICE=ipsec0,10Mbit,1Mbit RATE=128Kbit WEIGHT=10Kbit PRIO=5 RULE=192.128.1.0/24 Does it work or What else options need to be taken care like ipsec packets/protocol/port # etc.? C''d anybody suggest please? regds, Srikanth. _______________________________________________ LARTC

Hi, Any body having idea to find the NIC Capacity / BW (10 / 100 Mbps) ? Whether the interface may be eth0/eth1/ppp0 or some other. Is there any related IOCTL avialable, if so just give the linux-2.4.18 file path. thanks, Srikanth. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Sub:[LARTC] cbq init for one port on a subnet Hello, We use cbq.init to limit bandwidth. It works great on a per-user basis. Now I''d like to limit traffic from a netblock to the Internet on port 6699. Network is 192.168.0.160 mask 255.255.255.224 eth0 is the gateway eth1 connects the netblock in question Is this the proper syntax; DEVICE=eth0,10Mbit,1Mbit RATE=100Kbit

Hi, The CBQ config file shud be some thing like this. DEVICE=eth0,10Mbit,1Mbit RATE=50Kbit WEIGHT=5Kbit Shall i hardcode the DEVICE BW as 10/100 Mbit or Shall i use any other tool like ethtool for getting this. ethtool gives Speed: 10Mbps If so, how about, if i use some other Interfaces other than eth0, like ppp0 or some other? C''d anybody can give a suggestion over this? thanks