search for: sr0

...ke my CD / DVD mount with exec gnome-mount --write-settings --device /dev/sdc0 -o exec What is the equivalent in KDE ? My initial research suggests that I actually have to write a custom udev rule to achieve this. This has led me as far as running udevinfo -q path -n /dev/scd0 udevtest /block/sr0 (the output is below) My question is which of these commands is actually doing the mount as all I want to change is the exec flag rather that how the device is labeled. main: looking at device '/block/sr0' from subsystem 'block' run_program: '/bin/bash -c '/sbin/lsmo...

...th the distro disk. If anyone could give me some suggestions or insights I'd appreciate it. I have provided some data below. I tried the below commands after ejecting the CD and then executing the commands while the drawer is open, and I got the below outputs: # sudo mount -t iso9660 /dev/sr0 /mnt/cdrom mount: special device /dev/sr0 does not exist And: # mount /dev/cdrom /mnt/cdrom mount: block device /dev/cdrom is write-protected, mounting read-only mount: you must specify the filesystem type And: # mount /dev/scd0 /mnt/cdrom mount: block device /dev/scd0 is write-protected, m...

...th the distro disk. If anyone could give me some suggestions or insights I'd appreciate it. I have provided some data below. I tried the below commands after ejecting the CD and then executing the commands while the drawer is open, and I got the below outputs: # sudo mount -t iso9660 /dev/sr0 /mnt/cdrom mount: special device /dev/sr0 does not exist And: # mount /dev/cdrom /mnt/cdrom mount: block device /dev/cdrom is write-protected, mounting read-only mount: you must specify the filesystem type And: # mount /dev/scd0 /mnt/cdrom mount: block device /dev/scd0 is write-protected, m...

Dear All I tried to mount an external cdrom on my CentOS 5 server but un-successful . I attached the device to my USB port and then the followings have been added to my /dev folder : "cdrom -> scd0 cdrom-sr0 -> scd0 cdrw -> scd0 cdrw-sr0 -> scd0 cdwriter -> scd0 cdwriter-sr0 -> scd0" To this end , I tried to mount it as the followings (but it didn't get through) : #mount -t vfat /dev/cdrom-sr0 /mnt/cdrom Add the following line to /etc/fstab : /dev/cdrom-sr0 /mnt/cdrom vfat noau...

Hello, I try to install some applications on XEN. These applications have a automated install and are based on SLES10SP3. During the installation the device searches for /dev/sr0. Which fails in the xen enviroment. I now make a work around with booting a rescue system and mounting /dev/hdc and so on. But it should not be that difficult to install something into XEN. Can Somebody shed some light on how to make /dev/sr0 available for domu mfg, Jeroen __________________...

...new lv without problem but when I go to format its file system then I get these warnings: Warning: WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. When I take a look at things using parted I see this: # parted -l print Model: ATA WDC WD5000AAKS-0 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size...

...w can I convince win-xp to boot? That's what I did: ================== I installed win-xp guest on debian squeeze: # virt-install --connect qemu:///system --name winxp-prof --ram 1024 \ --disk path=/dev/vg-levo/winxp-kvm,size=10 \ --network bridge:br0 --vnc --os-variant winxp --cdrom /dev/sr0 /dev/vg-levo/winxp-kvm is a lvm (logical volume, 10GB) Installation worked, but was extrem slow. Machine: Lenovo B560, core i3, 6 GB RAM. WinXP made a normal reboot after installation, I ejected install cd, then: virt-manager output: Error starting domain: internal error Process exited while...

...xen-utils-common Version: 4.0.0-1 Severity: normal This is an offshoot of Bug#588888, but is really a separate issue. It appears that with hvmloader, the disk device names presented to the vm must by from a specific set that hvmloader knows how to emulate. Names like hd[a-c] and sd[a-c] work, but sr0 does not. While this makes sense, when you think about what hvmloader is doing, it is not obvious. So, the cdrom must be named hdc (sdc might also work; I haven't tried it). Second, for some phy: names (on the host side) you must use the full /dev/xxxx, while for others, you can omit the /dev...

CentOS-6.9 I am trying to verify a locally created dvd. I am using sha256sum in this fashion: sha256sum /dev/sr0 Which gave this result: sha256sum: /dev/sr0: Input/output error So I tried this: sha256sum /dev/cdrom Which, after some time, also produces: sha256sum: /dev/cdrom: Input/output error What does this mean and how do I fix it? -- *** e-Mail is NOT a SECURE channel ***...

Hi I have absolutely no idea what does it means : --------------------- Kernel Begin ------------------------ WARNING: Kernel Errors Present Buffer I/O error on device sr0, l ...: 16932 Time(s) end_request: I/O error, dev sr0, sector ...: 16962 Time(s) ---------------------- Kernel End ------------------------- I am getting this all the time a lot of times as you can see. Machine is running on Centos 5.1 x64 running vmware server , with 2 serial ata...

I have a couple computers running 2.6.38 (Ubuntu Natty 2.6.38-8-generic), and on both of them "btrfs device scan" comes back with nothing other than "failed to read /dev/sr0" One computer has a btrfs RAID-1 volume, and the other has two separate btrfs filesystems. The results are the same whether the filesystems are mounted or not. Why is "btrfs device scan" not scanning the devices? vic -- To unsubscribe from this list: send the line "unsubscrib...

I am a Fedora 13 user, so HAL automounts CDROMs and DVDROMs on /media/<LABEL> (this node is also dynamically created and removed from the /media/ directory as needed). II would like to assign a device drive letter to /dev/sr0 to reference any CD or DVD when inserted (e.g. d:: --> /dev/sr0), instead of having to manually create a symlink to the dynamically created /media/<LABEL> directory each time I load a DVD or CD. As I understand it, this should work. My problem is that mountmgr doesn't seem to "se...

Hey guys, Thanks a lot for the CentOS 6 distro. I am having trouble burning the i386 dvds. I tried on a RHEL 6 deskop and also a CentOS 5 laptop. The command I am running on both systems is this: growisofs -dvd-compat -speed=4 -Z /dev/sr0=/home/gsgatlin/CentOS-6.0-i386-bin-DVD/CentOS-6.0-i386-bin-DVD.iso The error I am seeing is: :-( /dev/sr0: 2295104 blocks are free, 2297586 to be written! (Yes it puts a sad face on the command line) The DVD says DVD +R on it if that matters. I was able to burn the 64 bit dvd's ok with sim...

...t point. Now k3b tells me that it can't find any drives. [nathalie at jeff ~]$ ll /dev/scd0 brw------- 1 nathalie disk 11, 0 Mar 10 14:00 /dev/scd0 [nathalie at jeff ~]$ ll /dev/cdrom* lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/cdrom -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/cdrom-sr0 -> scd0 [nathalie at jeff ~]$ ll /dev/dvd* lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvd -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdrw -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdrw-sr0 -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvd-sr0 -> scd0 lrwxrwxrw...

...cawse, since they assume the entire world runs Windoze.) but despite my best efforts, it keeps being mounted with UC-LC mapping enabled. here's what I've been trying: mount -t iso9660 -o norock,remount,ro,nosuid,nodev,uhelper=udisks,uid=500,gid=500,iocharset=utfi,mode=0400,dmode=0500 /dev/sr0 /mnt/cd and even this: umount /mnt/cd mount -t iso9660 -o norock,ro,nosuid,nodev,uhelper=udisks,uid=500,gid=500,iocharset=utfi,mode=0400,dmode=0500 /dev/sr0 /mnt/cd I've also tried using nojoliet both with and without norock, and also map=normal, all to no avail. I also tried the remount op...

...chine's CD-ROM drive does support writing/burning.) I'm using the "virt-manager" GUI to start the virtual machine. Once started, the "qemu" command line from my virtual machine process includes the following, where the host's built-in CD reader/writer is "/dev/sr0". /usr/bin/qemu-system-x86_64 ... -drive file=/dev/sr0,if=none,id=drive-ide0-0-1,readonly=on,format=raw This obviously says that the device is "readonly". A snippet of XML from my virtual machine from the CDROM is: <domain type='kvm'> ... <devices...

...WINE 1.2 under Ubuntu 11.10. It automatically mounts CDs and DVDs at /media/(disc name). So whenever I insert a new disc, I have to change the configuration of WINE which is a bit annoying. I could not find any help via Google. On ubuntuforum.org I was told to point WINE to the device itself (/dev/sr0) instead of the mount point, but that didn't work. Or at least, Baldur's Gate does not believe me that I have it's disc inserted. When I give WINE the mount point, then it runs fine. Since I got no more replies on ubuntuforum for some days now, I thought maybe someone here can help me.

...irtd in the foreground with debug set to 3, then I will always eventually get this: Starting snapshot test Wed Apr 29 09:34:34 AKDT 2015 Domain snapshot 20150429 created Target Source ------------------------------------------------ vda /glustervol1/vm/test/test.20150429 hdc /dev/sr0 Block Commit: [100 %] Successfully pivoted Domain snapshot 20150429 deleted Target Source ------------------------------------------------ vda /glustervol1/vm/test/test.20150429 hdc /dev/sr0 Ending snapshot test Wed Apr 29 09:34:35 AKDT 2015 Starting snapshot test Wed Apr 29...

...>. > > The one under <source> should be set to the address of the CDROM drive > on the host. It can be obtained e.g. using lsscsi: > > # lsscsi > [2:0:1:0] disk ATA ST3500418AS CC38 /dev/sda > [3:0:0:0] cd/dvd HL-DT-ST DVDRAM GH24NSB0 LN00 /dev/sr0 > > (so 'scsi_host3'(adapter) and bus='0' target='0' unit='0') > > The second address <address type='drive> is the address on the VM's > bus. > > <address type='drive' controller='1' bus='0' target=...