search for: sports

Hi all, I''m new to shorewall and have been struggling with several problems for several days now. Most of them are solved, but one still persists. The firewall is running on my server under Debian Sarge (Kernel 2.6) I''ve got three network interfaces: ppp0 (DSL Internet) eth1 (lan) ath0 (wlan) eth1 and ath0 are bridged together to br0. The problem is, that Samba (also running

Hi, I have a proxy/firewall, I want to dnat requests for 193.205.140.106 on port 443 towards 10.2.15.23 and requests for 193.205.140.106 on ports 4330 and 3389 towards 10.2.15.25, these rules must apply from internet, loc and fw (some client use a proxy on fw to reach these servers) I have tried with the following rules: DNAT net dmz:10.2.15.23 tcp 443 -

I''m attempting to setup Squid as shown on: http://shorewall.sourceforge.net/Shorewall_Squid_Usage.html#DMZ The firewall is a Bering 1.0 firewall running Shorewall 1.3.11, Red Hat 7.2 on the server in the DMZ. I''m not seeing the requests come in to the server using tcpdump. The server is 192.168.2.1 connecting to eth2 on the firewall, the local traffic I''m trying to

Hi Tom Here is the output of shorewall status Thanks Lars [H[2JShorewall-2.0.13 Status at - Thu Dec 30 21:43:44 CET 2004 Counters reset Thu Dec 30 15:38:17 CET 2004 Chain INPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 38383 11M ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 DROP !icmp --

Hi, I get frequent logfile entries from Shorewall similar to the following: Nov 25 11:22:51 10.0.0.248 kernel: Shorewall:net2mill:DROP:IN=eth2 OUT=eth0 SRC=202.96.117.50 DST=10.0.0.10 LEN=56 TOS=0x00 PREC=0x00 TTL=241 ID=0 PROTO=ICMP TYPE=11 CODE=0 [SRC=10.0.0.10 DST=202.101.167.133 LEN=48 TOS=0x00 PREC=0x00 TTL=1 ID=13591 DF PROTO=TCP INCOMPLETE [8 bytes] ] Could someone explain what the

sorry, i''m confuse where to post my problem.. i was post to shorewall-users, but must read to support.html this''s my problem ----------- i have squid running on DMZ zone and my network using ProxyARP on eth1 and eth2 mylinuxbox slackware 9.2 my network can access to internet normal, but can''t redirect to squid server from firewall. sometimes my network can connect

...< ActiveRecord::Base belongs_to :sport validates_uniqueness_of :event_type end When I run it, I get this error message: Showing /event_type/new.rhtml where line #27 raised undefined method `each'' for nil:NilClass <select name="event_type[sport_id]"> 27: <% @sports.each do |sport| %> 28: <option value="<%= sport.id %>" 29: <%= '' selected'' if sport.id == @event_type.sport.id %>> 30: <%= sport.sport %> However, if I take validates_uniqueness_of off, i.e.: class EventType < Act...

I have to answer the following question for a homework assignment. A researcher was interested in whether people taking part in sports at university made more money after graduating, taking into account the students' GPA. They sampled 200 alumni from a large university. The variables are: income (income 10 years after graduating), sports (1 if they did sports, 0 if they did not), and GPA (the grade point average at university)...

Hi community, i have a samba server that work's great, but my friends of IT security said that is vulnerable without a firewall,  i try to set an iptables firewall using the official documentation but is not working (obviously), this ti my config: #!/bin/sh echo n Aplicando Reglas de Firewall... ## FLUSH de reglas iptables -F iptables -X iptables -Z iptables -t nat -F ## Establecemos

I copied and tried to adapt to my necessities the excellent script of Pedro Larroy, but I am inexperienced in QoS and I have doubts. I have cablemodem to Internet 1024kbit down and 256kbit up, through eth0. The LAN has eth1 and NAT. I formed the band so that shaping goes by the eth1 (of the LAN) with bandwidth maximum CEIL=768. But I observe that the traffic sometimes accelerates and other

I have what strikes me as an odd problem with shorewall. Let me describe my setup. My desktop (alfred) is connected to the network through an ADSL modem. I am running rp-pppoe, and this works perfectly. I have a small home network, with two LANs; an Ethernet LAN (including a machine running Windows XP), and a WiFi LAN, including the laptop (william) I am using now. All the computers except for

Currently I have shorewal 2.2 installed om my debian 2.6.8 kernel. The firewall machine can access the internet via a ethernet modem fine. The firewall can ping the local network. The local network can ping the firewall server, see the samba files. Howeven teh local network cannot access the internet through the firewall Any suggestions? Rob van Overbruggen Settings and stats: Server: Eth1 :

Hi there, i am trying to shape a network for a college dorms... INTERNET---- ETH0--------Nat Box-------ETH1--------LAN I have set up classes of traffic (HTTP, FTP, MAIL, IM, OTHER) and i have assigned a rate for everyone with a HTB qdisc. The limit based in traffic is working flawlessly. However, under every HTB class i have set up a ESFQ queue discipline with hash value set to

I must have something configured wrong somewhere. I''ve enabled proxy-arp on my shorewall 2.0.7 firewall. Works fine for what its supposed to do, I can see all the machines through it great. However, whenever its enabled, the network on the DMZ goes screwy. I''ve narrowed it down to this: when proxy arp is enabled for that interface, like such: echo 1 >

I copied and tried to adapt to my necessities the excellent script of Pedro Larroy, but I am inexperienced in QoS and I have doubts. I have cablemodem to Internet 1024kbit down and 256kbit up, through eth0. The LAN has eth1 and NAT. I formed the band so that shaping goes by the eth1 (of the LAN) with bandwidth maximum CEIL=768. But I observe that the traffic sometimes accelerates and other

---------- Original Message ---------------------------------- From: "Jim Van Eeckhoutte" <jim@vaneeckhoutte.com> Reply-To: <jim@vaneeckhoutte.com> Date: Mon, 8 Jul 2002 15:27:14 -0700 this is shorewall status output: tcp 6 431899 ESTABLISHED src=192.168.20.5 dst=64.4.12.45 sport=2185 dport=1863 src=64.4.12.45 dst=63.25.123.58 sport=1863 dport=2185 [ASSURED] use=1

I apologize for the first message. :) --------------------------------------- I have an FTP server running in the DMZ section of my home network. It uses port 23000 for connection and ports 19990 to 19994 for data transfer. I have setup the following rule for outside people to connect to it: DNAT net dmz:192.168.2.2 tcp 23000 I''m at work right now and I can''t use

Typically (or at least somewhat occasionally) after a reboot of my shorewall[-lite] machine I find that I end up with conntrack table entries for unNATted connections such as: # conntrack -L -p udp --dport 5060 -d 99.232.11.14 udp 17 59 src=10.75.22.8 dst=99.232.11.14 sport=5060 dport=5060 packets=5472 bytes=3031488 [UNREPLIED] src=99.232.11.14 dst=10.75.22.8 sport=5060 dport=5060 packets=0

I have problem getting answer on http request from all my local subnets but not from local subnet. Ping and requests on ports 21 22 23 25 110 works fine. I logged port 80 in rules files and I got accept entry same for local subnet and other subnets. Local subnet is 192.168.6 Dec 29 09:52:40 zinfsrv2 kernel: Shorewall:loc2fw:ACCEPT:IN=eth0 OUT= MAC=00:09:6b:07:ca:cc:00:10:b5:fa:bd:71:08:00

...B projections, but I can't get the projections for any of the other positions (e.g., RB). How can I get the RB projections? I'm not sure what the actual website for the RB and other projections is. When I go to the main website for the football projections ( http://accuscore.com/fantasy-sports/nfl-fantasy-sports/), it displays the QB projections. When I click on another position (e.g., RB) it displays a new URL ( http://accuscore.com/fantasy-sports/nfl-fantasy-sports/Rest-of-Season-RB). When I enter this new URL into the readHTMLTable function, I receive the following error: Error in...