search for: spd_normal

Displaying 9 results from an estimated 9 matches for "spd_normal".

2018 Jan 29
2
Centos 7 add-on serial cards
...; Thanks for the suggestion. I looked at them with setserial, but I have no familiarity with the program to know what to change. setserial -ag /dev/ttyS* /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 ??? Baud_base: 115200, close_delay: 50, divisor: 0 ??? closing_wait: 3000 ??? Flags: spd_normal skip_test /dev/ttyS1, Line 1, UART: 16550A, Port: 0x8000, IRQ: 17 ??? Baud_base: 115200, close_delay: 50, divisor: 0 ??? closing_wait: none ??? Flags: spd_normal skip_test /dev/ttyS2, Line 2, UART: 16550A, Port: 0x8400, IRQ: 17 ??? Baud_base: 115200, close_delay: 50, divisor: 0 ??? closing_w...
2018 Jan 29
0
Centos 7 add-on serial cards
...looked at them with setserial, but I have no familiarity with the > program to know what to change. > > setserial -ag /dev/ttyS* > /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 > ??? Baud_base: 115200, close_delay: 50, divisor: 0 > ??? closing_wait: 3000 > ??? Flags: spd_normal skip_test > > /dev/ttyS1, Line 1, UART: 16550A, Port: 0x8000, IRQ: 17 > ??? Baud_base: 115200, close_delay: 50, divisor: 0 > ??? closing_wait: none > ??? Flags: spd_normal skip_test > > /dev/ttyS2, Line 2, UART: 16550A, Port: 0x8400, IRQ: 17 > ??? Baud_base: 115200, close_...
2018 Jan 28
2
Centos 7 add-on serial cards
I'm upgrading from CentOS6 to CentOS 7. I run 2 weather stations on C6 and have one of them attached to ttyS0 which is on the motherboard, and the other to ttyS2 which in on an add-on PCI serial card. I'm migrating the weather stations another host running C7 which has a similar hardware configuration.? When I connect the weather station to ttyS0 everything works fine, but when I try
2006 Jun 23
2
Need help configuring additional serial ports
...on my system in the contents of /proc/pci. Here is what the built-in, working serial port looks like: # setserial -a /dev/ttyS0 /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 Baud_base: 115200, close_delay: 500, divisor: 0 closing_wait: 30000 Flags: spd_normal skip_test auto_irq Any ideas how to get these serial ports working? Thanks, Alfred # lspci 00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller (rev 02)...
2015 Nov 24
0
Cannot access Patriot Pro II from new system
...to RxD, and check that characters are echoed in minicom. Then check the continuity to the serial port. > > # setserial -gav /dev/ttyS0 > /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 > Baud_base: 115200, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal skip_test Curious about the "skip_test" option... > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser -- Charles Lepple clepple at gmail
2011 Nov 11
3
COPILOT Glucose Meter COM problem
I am a 62 year old beginner in Ubuntu. Thanks for any help, guidance, suggestions on this problem! I have used commands like the following to be certain that I have an active com port: dmesg | grep ttyS rm com1 ln -s /dev/ttyS0 com1 So I suspect the solution lies somewhere in WINE. If all else fails I will get a USB to SERIAL converter cable and try that. My wife has an Abbott Labs Freestyle
2015 Nov 23
2
Cannot access Patriot Pro II from new system
...onf -rw-r----- 1 root nut 3887 M?r 20 2015 upssched.conf # ls -l /dev/ttyS0 crw-rw---- 1 root nut 4, 64 Nov 23 14:13 /dev/ttyS0 # setserial -gav /dev/ttyS0 /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test # stty -F /dev/ttyS0 speed 2400 baud; line = 0; min = 1; time = 0; -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-sig...
2007 May 11
2
Please Help for MGE NOVA 1100 AVR Serial configuration!
...or. Same is when i type: mge-shut -u root -DDDDDDDDDD /dev/ttyS0 . I unplog and replog and after reboot my system for some times. I tried also to do a configuration of my serial port but without success. My setserial command output is: dev/ttyS0 uart 16550A port 0x03f8 irq 4 baud_base 115200 spd_normal skip_test auto_irq I'm use serial port on a fedora core 3 system. Please help! -- "Heureux ceux qui sont conscients de leur pauvret? spirituelle." - Mat 5:3(Les Saintes Ecritures - Traduction du monde nouveau). ---------------------------------------------------------------- Ce...
2003 May 21
6
COM: port problems
Unfortunately, almost all the Windows programs I want to run under Wine need to access the COM: ports, and I cannot get any of them to run. Typically, I get stuff like this ... fixme:comm:EscapeCommFunction16 no cid=0 found! fixme:comm:EscapeCommFunction16 no cid=0 found! err:comm:COMM16_ReadComplete async read failed 000003e3 fixme:comm:EscapeCommFunction16 no cid=3 found!