search for: sophos

Hello all Have a small problem. We use Samba as our PDC for a large amount of NT clients. We also use Sophos anti-virus to protect the workstations and servers. The problem basically is that although I can get Sophos to work properly I have to go to the actual workstation to install it from the server. Once I've done this Sophos works fine and automatically updates from the server. However when I...

I'm pretty new to KVM and have a KVM CentOS 7.1 hypervisor running a few VMs. I'm moving all my VMs from an ESXi host as I want to use KVM in future. Most of my VMs are working except for one which is running a Sophos UTM router (Sophos UTM is similar to products like pfSense <https://www.pfsense.org/>, Smoothwall <http://www.smoothwall.org/> etc). The host has 3 physical NICs which are configured on the Sophos VM as: 1) LAN (fixed IP) 2) DMZ (fixed IP) 3) WAN (which is directly plugged into a cable...

An e-mail you sent to the following recipients was infected with a virus and was not delivered: wdarrah@lynksystems.com MessageID: T6434583d4c0a08027417c Subject: Re: That movie Attachment: SMTP Messages: The operation completed successfully. Scenarios/Incoming/Sophos Antivirus Content Scanner: Scanned by 'Sophos AV Interface for MIMEsweeper'. SMTP Messages: The operation completed successfully. Scenarios/Incoming/Sophos Antivirus Content Scanner: Scanned by 'Sophos AV Interface for MIMEsweeper'. Scenarios/Incoming/Block Incoming Profanity: The...

Hi, I'm getting the following error when trying to save a file in a share with activated on-access-scanning using sophos: Nov 9 17:10:41 server kernel: talpa-deny: Error occured while opening /vol/group/test.ppt on behalf of process smbd[23713/23713] owned by 6688(6688)/0(7003) <512> I know that this is not a samba problem, but may be someone had this problem too and solved it. Basically this error comes up...

...wards <philledwards@gmail.com> > wrote: > >> I'm pretty new to KVM and have a KVM CentOS 7.1 hypervisor running a few >> VMs. I'm moving all my VMs from an ESXi host as I want to use KVM in >> future. Most of my VMs are working except for one which is running a Sophos >> UTM router (Sophos UTM is similar to products like pfSense >> <https://www.pfsense.org/>, Smoothwall <http://www.smoothwall.org/> etc). >> >> The host has 3 physical NICs which are configured on the Sophos VM as: >> 1) LAN (fixed IP) >> 2) DMZ (fix...

Hi Ajey, I thought I already was doing bridge mode. Below are the network interface definitions from the XML config file for the Sophos VM. (Note that it's actually the middle definition which is connected to the cable modem which is different to how I showed it in the earlier diagram). What I don't understand is that the interface type says "direct" in the XML even though in virt-manager it shows up as "Brid...

...s traffic to  open net 64.147.222.128/27 as both their gateways are on the router and the policy allows all traffic from open to the fw.  What am I missing? Thanks, Art ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb

Robert's suggestion indeed fixed the problem. I kept thinking those entries were necessary in inetd.conf. Also, kind thanks to Fred Gilbert for his prompt responses.:-) John

...ils shortly after they > arrive. Most emails are not opened again later, especially the > attachments. you're right about this. And if a user has suspicions abaout a possibly infected attachment, one can delete the whole email without hassle. [...] > For my day job I work for Sophos (A cyber security vendor), so all > this is familiar to me. If you have the budget for a commercial > product, then Sophos PureMessage does have postfix support. > Technical details here: > > https://docs.sophos.com/msg/pmx/help/en-us/msg/pmx/tasks/GSGConfigExtPostfixConfig.htm...

...at help maintain a Samba network specifically, or a *nix server in a Windows client environment generally. For example, the first script I'm going to share is a script that connects to the client machines in my domain and retrieve my AV logs, process them and return the results. My AV vendor (Sophos) has tools for this, but they were more complex to set up than this was to write, and would have simply emailed the logs to me on a per machine basis -- which wasn't what I wanted and not very useful. The second script is just a backup script that backs up the samba server to a removable hard...

does you cable modem give you automatically the IP address? if thats the case then you need to do bridge configuration between nic3 and macvtap dhcp ip and then you will be able to get dhcp attached IP to sophos vm - ajey On Tue, Sep 1, 2015 at 4:33 PM, Phill Edwards <philledwards@gmail.com> wrote: > Hi, I'm not sure what sort of diagram you mean, but I'll have a try. Does > this help? It sounds like I need to do something to enable routing on what > I've labelled "NIC3&...

...hich makes me wonder if you have the necessary forwarding rules active. Dan On 1 September 2015 at 13:48, Phill Edwards <philledwards@gmail.com> wrote: > Hi Ajey, I thought I already was doing bridge mode. Below are the network > interface definitions from the XML config file for the Sophos VM. (Note > that it's actually the middle definition which is connected to the cable > modem which is different to how I showed it in the earlier diagram). What I > don't understand is that the interface type says "direct" in the XML even > though in virt-manager it sh...

...7:39 AM, Phill Edwards <philledwards at gmail.com> wrote: > I'm pretty new to KVM and have a KVM CentOS 7.1 hypervisor running a few > VMs. I'm moving all my VMs from an ESXi host as I want to use KVM in > future. Most of my VMs are working except for one which is running a Sophos > UTM router (Sophos UTM is similar to products like pfSense > <https://www.pfsense.org/>, Smoothwall <http://www.smoothwall.org/> etc). > The host has 3 physical NICs which are configured on the Sophos VM as: > 1) LAN (fixed IP) > 2) DMZ (fixed IP) > 3) WAN (which is...

...t R couldn't make contact on port 80. I rechecked with R 10.1.0: fine. I reinstalled R 11.0.0 and selected "internet2" instead of "standard" for internet, no change. I thought "Can't be the firewall as it wouldn't get the list of mirrors" but I went into Sophos firewall and manually added R 11.0.0 and everything is now fine. Very odd and I'd be interested to hear if some clever person can explain why R 11.0.0 was making (very slow) access to the internet to get the list of mirrors but then failing (I have the 10.1.0 location in the windows path but n...

Anyone are using Server Protect for Linux to protect the files on Samba File Server ? Are there any other product, I want to check every file saved on my file server. -------------- next part -------------- HTML attachment scrubbed and removed

...ting your filesystem with more to begin with. The ext4 default is 16k per inode, but it is easy to set a different value when you format, or use an FS that does not suffer from that limitation such as XFS, (I use btrfs so I can snapshot my maildir) > [...] >> For my day job I work for Sophos (A cyber security vendor), so all >> this is familiar to me. If you have the budget for a commercial >> product, then Sophos PureMessage does have postfix support. Technical >> details here: >> >> https://docs.sophos.com/msg/pmx/help/en-us/msg/pmx/tasks/GSGConfi...

That's pretty much the question. I've got Symantec NAVCE running on my NT server protecting itself, the Windows clients and the Exchange server, but what do i do about my Linux based Samba server? Will a linux based AV app search for Win32 based viruses? Thanks, VeKTeReX

Hello, I'm using Sambsa 2.28 and I've just installed Sophos anti-virus and sophie 3.04rc2. If I run sophie standalone to scan a directory/folder it all runs ok, as it also does in daemon mode. I've changed my smb.conf file to specify vfs option=/usr/lib/samba/vscan-sophos.so When I access the share I receive the following in the syslog: samba...

Hello list, I was just wondering if anyone is using anti-virus software on their Samba server. I have protection on my clients, but I want to run software on the server too. I've looked at McAfee's Virus Scan, but as far as I can tell, it only uses "on-demand" scanning, meaning I have to trigger it from the command line, or run a cron job. I would like to have

...ng all the VMs up on "backup" and they've been running OK there ever since. Over the last few days I've rebuilt "main" and again all was going well and I migrated 4 of the 5 VMs back onto it. Then this morning I came to set up the final VM on "main" which is a Sophos firewall machine with 3 NICs (I have 3 physical NICs). Nothing uses 2 of the 3 NICs except the Sophos VM. I unplugged one of the ethernet cables from "backup" and plugged it into the 3rd NIC on "main" and all of a sudden "main" froze and again all network connectivity...