search for: snmpwalks

Sorry, I just now figured out how to get a usable output. -Option one doesn't work at all for me. snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h Creating /usr/share/snmp/mibs/ups-mib.txt-mib.c Done. -Option 2 is attached. I ran the following to get the output. snmpwalk

2014-02-26 1:45 GMT+01:00 Jason R Begley <jayray at digitalgoat.com>: > Sorry, I just now figured out how to get a usable output. > -Option one doesn't work at all for me. > > snmp_build: unknown failuresnmpget: Error building ASN.1 representation > (Can't build OID for variable) > COUNT = 0 / 0 > Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h > Creating

I'm trying to get SNMPv3 management working for an APC AP9617 card. It is newly refurbed, running sumx v3.7.2 and aos v3.7.3. In the SNMPv3 user profiles section I have (I don't care about the password leaking, it's temporary): User Name: nut Authentication Passphrase: NutScan at Password43LongerWord Privacy Passphrase: NutScan at Password43LongerWord Authentication protocol:

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

Thanks, now I started getting messages from the list. As you advised, I renamed the mib file NETCARD.mib to Tripplite and ran command ./gen-snmp-subdriver.sh -H 10.200.254.39 -c public -n Tripplite Here is what it says: snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating tripplite-mib.h Creating tripplite-mib.c Done.

[Please keep the list CC'd. Thanks!] On Feb 13, 2014, at 4:55 AM, ??? ????? wrote: > Can you try adding "-v 1" to the snmpwalk command? If that works, we can add it to gen-snmp-subdriver.sh. > > Yes, I tried it before, ran command "snmpwalk -v 1 -On -c public 10.200.254.39 .1.3.6.1.4.1.935" > > Output: > .1.3.6.1.4.1.935 = NULL > Error: OID not

Just a hunch about your snmpwalk, what happens if you format like this? snmpwalk -l authpriv -v 3 -u user -a MD5 -x DES -A authpassphrase -X privpassphrase {host address} so snmpwalk -l authpriv -v 3 -u nut -a MD5 -x DES -A NutScan at Password43LongerWord -X NutScan at Password43LongerWord apcups Thank you, David Zomaya Tripp Lite ________________________________ From: Nut-upsuser

[please use Reply-All to keep the list CC'd, thanks] On Mar 30, 2015, at 11:04 PM, Jason Gould <jgould at cddiagnostics.com> wrote: > Thanks. I should also mention the freenas server is setup with an lacp lagg. > > I will also mention that even when not setting pollfreq (leave as default) the issue still occurs. > It looks like the default for pollfreq is actually 30 on

Hi All, I have a C6 (latest patches) physical machine that I use for network and server monitoring, predominantly over SNMP. It is on VLAN80. My network management interfaces on the switches are on VLAN50 with routing between the VLANs. I recently changed the router to a CISCO ASA 5505 (reasonably recent IOS version, certainly post HeartBleed), with the management interface on a higher

Hello, Can someone explain why I don't get a timeout when I use the community string "public" even if I don't have it defined in my snmpd.conf file. It doesn't return data but it also doesn't timeout. See example below. ... rocommunity nobody 127.0.0.1 ... [root at L703108 pgsql]# snmpwalk -v 1 -c public 127.0.0.1 1.3.6.1.2.1.2.2.1 ifMIB [root at L703108 pgsql]#

I missed that snmp-ups set pollfreq to 30 by default. I'd hope that it would set deadtime to an appropriate value as well than, no? Is there a way to query what the settings are or what the defaults are? I'm going to set POLLFREQ=30 and DEADTIME = 90 and see if that has any effect. I'll check for the logs. And if that doesn't get my anywhere I'll look at trying to simulate

Hello, I'm wondering if anyone else is seeing the same issues I'm seeing here. I have recently upgraded one of my systems from 4.4 to 4.5 and ever since then I cannot get snmp to work. I am monitoring the interface traffic. Please keep in mind the firewall/router I do the same thing without any issues for 4 interfaces and it is still at 4.4 and doesn't have any issues. If I

I'm trying to use snmpwalk to look at other machines, but I can't get a response. It keeps timing out. It can see itself, though. I haven't had this problem with other machines and I don't know what's different. Suggestions? -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have a Cisco 6509 switch that I'm monitoring with SNMP from a CentOS5 machine. SNMP polls are the only access I have to this device, we are not allowed to log on via telnet. How can I find out which port on the switch a particular server is connected to? I was hoping that this is somehow possible using the mac address and the data gathered from snmpwalk/snmpget requests but I'm not

On Feb 25, 2014, at 4:23 PM, Arnaud Quette wrote: > gen-snmp-subdriver.sh simply hasn't done its job, for some reasons. > well, 1 clear is that's it not a completed effort... at all > but, still IIRC, it should have produced at least a bit more Hi Arnaud, I may not have been specific enough in my description. The crash that Jason saw is with the version of snmp-ups that is

2014-02-25 12:58 GMT+01:00 Charles Lepple <clepple at gmail.com>: > On Feb 24, 2014, at 11:48 PM, Jason R Begley wrote: > > > 0.073855 load_mib2nut: trying classic method with 'delta_ups' mib > > 0.073878 Entering nut_snmp_get_str() > > 0.073899 nut_snmp_get((null)) > > 0.073918 nut_snmp_walk((null)) > > Arnaud, > >

Hi ALL, I am trying to use the SNMP extension of michel http://x-ray.prokon.cz/data/snmp/ i pached the snmpd damon as mentioned in the README but when i run "snmpwalk -c community target enterprises.18756" i get this error "snmpwalk: No securityName specified (Sub-id not found: (top) -> enterprises)" any idea ? Thanks , venkat

Posted this to xen-users back in Oct (http://www.gossamer-threads.com/lists/xen/users/186768), but just confirmed that I''m still seeing this behavior on 4.1. Polling the UCE-SNMP-MIB::ssCpuRawIdle counter results in a total that''s double the actual number of cpu''s on the system, so for example: nms ~ # snmpwalk -v 2c -c ''XXX'' xen1

Hi, I'm thinking about adding support for PDU (Power Distribution Unit) devices from Digipower [1] and Aviosys [2] to NUT via the SNMP interface. The specific devices I have in mind are the following: Digipower AMz-1623/SW-08-1 Aviosys IP Power 925x (both are 8-port PDUs which are SNMP capable via an ethernet interface) Does anybody have other DigiPower or Aviosys devices and if so

I've got an update on this case Using tkmib I discovered that my UPS (NMC per say) sends its state by OID 1.3.6.1.4.1.318.1.1.1.11.1.1.0 .iso.org.dod.internet.private.enterprises.apc.products.hardware.ups.upsState.upsBasicState.upsBasicStateOutputState.0 = 0001010000000000001000000000000000000000000000000000000000000000 (mib used for this snmpget was powernet441.mib) (I got a description about