search for: smartpro

I have a TrippLite SmartPro UP (SMART3000RM2U) that shipped with the DB9 cable# 73-0866. nut doesn't recognize the UPS using the tripplite driver. I found this page: http://www.tripplite.com/support/download/PA12/help/device.htm The link lists the SmartPro series as using the cables 73-0724 or 73-0844 and the Internet...

I have a new SMART1050SLT Tripp Lite UPS that both tripplite and tripplitesu drivers hate. Both simply time out with a "can't find" message. Does anyone know about the SmartPro series?

I'm running Ubuntu 5.10, featuring a patched kernel 2.6.12. I have a Tripp Lite SmartPro SLT ups connected via USB. I have cleanly compiled and installed the new nut 2.0.3. I do have the "extras", like libusb, installed too. I need some USB advice- that is, I'm not sure what a normal baseline should look like. At boot, the modules usb_core and uhci_hcd are loaded....

Greetings to all, I recently connected a Tripp Lite SMX500RT1U unit to a Synology NAS (basically a Marvell ARM equipped box running a custom 2.6.24 Linux). I tried using the tripplite_usb driver contained in nut 2.4.1 with not much luck. It does read the model ID and VA rating properly, but fails at everything else - mains voltage (this is a 230VAC EU model), battery config, unit status etc.

I am using NUT 2.0.2 on SuSE Linux 9.2 which is attached to a Tripplite SmartPro Net 2200 UPS. I have Nut using the included tripplite driver, and it is communicating with the UPS correctly. The battery voltage of theTripplite reported by the NUT server is 13.5VDC. If I attach the UPS to a Windows 2000 server running Tripplite's PowerAlert software, the battery voltage is...

...hdog command ("W\0"), it can no longer receive any signals and eventually exits. The UPS responds to other watchdog commands ("W5" for example), but there doesn't seem to be a way to disable it once enabled. From my communication with Tripp Lite, it doesn't seem that the SMARTPRO 3003 protocol officially supports Watchdog. I made some modification to tripplite_usb.c. This modified code checks which protocol the UPS is using and then resets the watchdog if it is not SMARTPRO protocol. ====================================================================== Tripplite_usb.c...

...nd that -u root might help, and also that the kernel hid driver must not be allowed to claim the device. After doing "rmmod hid", "/usr/local/ups/bin/tripplite_usb -u root auto" gives one of the following, seemingly at random: ==== Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: TRIPP LITE/TRIPP LITE OMNIVS1500XL Unknown protocol (2001)Attached to Tripp Lite OMNIVS1500XL Unknown value for s[2]: 0x34 Error reading 'D' value: Unknown error 0 Error re...

I keep getting this kind of stuff in /var/log/messages Jan 18 17:45:03 bulldog tripplite_usb[9979]: libusb_get_interrupt() returned -110 instead of 8 Should I be worried about it? upsc seems to work fine... I tried building the 2.0.5 but none of the included spec files seemed to work with opensuse 10.2 and adapting their 2.0.4 spec file didn't seem to work out well either. Building from

I keep getting this kind of stuff in /var/log/messages Jan 18 17:45:03 bulldog tripplite_usb[9979]: libusb_get_interrupt() returned -110 instead of 8 Should I be worried about it? upsc seems to work fine... I tried building the 2.0.5 but none of the included spec files seemed to work with opensuse 10.2 and adapting their 2.0.4 spec file didn't seem to work out well either. Building from

Hello, I am trying to get a SMART500RT1U working on CentOS and just receiving the following message when attempting to start the driver: Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.5) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U Unknown input voltage range: 0x02 Unknown number of switchable load banks: 0x01 Unit ID: 65535 Unknown protocol (3005)Attached to Tripp Lite TR...

I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (09AE/0001) (002/004) - VendorID: 09ae - ProductID: 0001 - Manufacturer: TRIPP LITE - Product: TRIPP LITE UPS - Serial Number: unknown - Bus: 002 Trying...

Has anyone gotten this model of tripp-lite to work? sudo /usr/local/bin/upsdrvctl -DDDDD -u root start Network UPS Tools - UPS driver controller 2.0.5 Starting UPS: tripplite exec: /usr/local/bin/tripplite_usb -a tripplite Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.7 (2.0.5) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: TRIPP LITE/ TRIPP LITE SMART3000RM2U libusb_get_interrupt() returned -110 instead of 8 libusb_get_interrupt() returned 0 instead of 8 libusb_get_interrupt() returned -110 instead...

...cluded below. Any ideas why the ups.status line is empty? jeff $ sudo /usr/local/bin/upsdrvctl -DDDDD start Password: Network UPS Tools - UPS driver controller 2.1.0 Starting UPS: tripplite exec: /usr/local/stow/nut-2.1-dev/bin/tripplite_usb -a tripplite Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.1.0) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: TRIPP LITE/TRIPP LITE SMART2200RMXL2U Using SMARTPRO protocol (3003) Unknown battery voltage: 0x3038 Attached to Tripp Lite SMART2200RMXL2U Unknown value for s[2]: 0x34 $ $ sudo up...

I'm trying to get a SMART2200CRMXL to work with nut, using a USB cable. tripplite_usb -a upsname returns: Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2) Warning: This is an experimental driver. Some features may not function correctly. No matching USB/HID UPS found My system info: CentOS 5.5 nut installed from repo upsd version 2.2.2 TrippLite SMART2200CRMXL (http://www.tripplite.com/en/products/model.cfm?txtModelID=3825) A...

...er doesn't seem to recognize my UPS. Below is the debug dump from attempting to load the driver. I am using the nut package from Debian: 2.2.1-2.1 and I was wondering if this was a known issue? maroon:/lib/nut# /lib/nut/tripplite_usb -DDDDD -a usbups Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (0000/0000) (005/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 005 Trying to match...

...Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 01) # lsusb Bus 001 Device 003: ID 09ae:3012 Tripp Lite Bus 001 Device 001: ID 0000:0000 However, the tripplite_usb driver doesn't seem to find the UPS: # tripplite_usb -u root -DDDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3) Warning: This is an experimental driver. Some features may not function correctly. debug level is '6' Checking device (09AE/3012) (001/003) - VendorID: 09ae - ProductID: 3012 - Manufacturer: Tripp Lite - Product: TRIPP LITE SMART2200RMXL2U - Serial Number: 9550ALCSM53890...

...ience with this model. My system is using the latest CVS checkout of the Development branch (as of this message), and libusb(-dev) packages version 0.1.11-6. The system uses GCC 4.0 to compile. Here is the output of ./tripplite_usb -DDDDD /dev/usb/hiddev0: Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.1.0) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (0000/0000) (002/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 002 Trying to match d...

On Mar 6, 2015, at 12:51 PM, Eric Cobb <Eric_Cobb at tripplite.com> wrote: > Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.5) > Warning: This is an experimental driver. > Some features may not function correctly. > > Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U > Unknown input voltage range: 0x02 > Unknown number of switchable load banks: 0x01 > Unit ID: 65535 > Unknown...

Just built and installed nut 2.4.1 with a usb.conf that looks like [trippb] driver = usbhid-ups port = auto desc = "Tripp Lite SmartPro 2200RMXL2U" The OS is Ubuntu 8.04.2 with kernel version 2.6.24. When trying to start the driver I get $ sudo ./upsdrvctl start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 Can't claim USB devi...

Hey, I am wondering if anyone gotten nut to work with a Tripp Light Smart Pro 2U Rack/Towers (SMART2200RMXL2U). If so which driver did you use, or what driver do you think I should try? Also when trying use a nut driver, do you have to be a nut user? Thanks, Ricky -------------- next part -------------- An HTML attachment was scrubbed... URL: