search for: shutdownargu

...t; > driver = powercom > > > type = BNT > > > port = /dev/ttyS1 > > > numOfBytesFromUPS = 16 > > > methodOfFlowControl = no_flow_control > > > validationSequence = {{11,0x42},{8,0},{8,0}} > > > shutdownArguments = {{1,30},y} > > > modelname = BNT2000APT > > > serialnumber = 2233445566 > > > desc = Computer Room Small UPS > > > > > > (...) > > > > a powercom patch has recently been submitted, and I had to first discuss > &...

...with UPS connected to the mains: Network UPS Tools upsd 2.0.4 Connected to UPS [Inform]: powercom-ttyS0 Synchronizing...done root@marto:/home/marto# upsc Inform@localhost battery.charge: 108.8 driver.name: powercom driver.parameter.linevoltage: 220 driver.parameter.port: /dev/ttyS0 driver.parameter.shutdownArguments: {{1,0},y} driver.parameter.type: Egys driver.version: 2.0.4 driver.version.internal: $ Revision: 0.5 $ input.frequency: 49.10 input.voltage: 234.3 input.voltage.nominal: 220 output.frequency: 49.10 output.voltage: 234.3 ups.load: 0.7 ups.mfr: PowerCom ups.model: Unknown ups.model.type: Egys u...

...parameter.linevoltage: 110 driver.parameter.loadPercentage: {6.1343,-0.3808,1.075,0.1811} driver.parameter.manufacturer: PowerCom driver.parameter.methodOfFlowControl: dtr0rts1 driver.parameter.numOfBytesFromUPS: 16 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/cuaa0 driver.parameter.shutdownArguments: {{0,10},n} driver.parameter.type: KIN2200AP driver.parameter.validationSequence: {{7,0},{8,0},{8,0}} driver.parameter.voltage: {1.9216,-0.0977,0.82857,0.0000} driver.version: 2.2.0 driver.version.internal: $ Revision: 0.5 $ input.frequency: 0.00 input.voltage: 0.0 input.voltage.nominal: 110 o...

...> /root/upsLog sleep 30 control=`/usr/local/ups/bin/upsc Inform@localhost ups.status` if [ $control != OL ] then /usr/local/ups/sbin/upsmon -c fsd fi I changed "telinit 0 " to "upsmon -c fsd", following the advice of Mr Selinger from the mailing list. Besides, I added "shutdownArguments={{1,0},y}" to ups.conf, as you advised me. With this configuration, if the system works correctly, according to me things should go like that in case of a prolonged power failure: power failure->ups.status=="OB"->"upsmon -c fsd"->system shutdown(normal shutdow...

Mr Claesson, with my current configuration, the ups.status when the UPS is disconnected from the mains is "OB". There is no more "OB BOOST". Now my upsd.users is: [root] password = password allowfrom = localhost upsmon master actions = SET instcmds = ALL and upsmon.conf is: RUN_AS_USER root MONITOR Inform@localhost 1 root password master MINSUPPLIES 1 SHUTDOWNCMD

..." is powercom ups.conf looks like this! Okay so APC1 is not and APC! [APC1] driver = powercom type = BNT port = /dev/ttyS1 numOfBytesFromUPS = 16 methodOfFlowControl = no_flow_control validationSequence = {{11,0x42},{8,0},{8,0}} shutdownArguments = {{1,30},y} modelname = BNT2000APT serialnumber = 2233445566 desc = Computer Room Small UPS I running /lib/nut/powercom -a APC1 -DDDDDDDDDD (Okay so the debugs are overboard!!!) Result is this! Network UPS Tools - PowerCom protocol UPS driver 0.12 (2.6.0) 0.0000...

...D UPS Battery] on usb-0000:00:1d.0-1/input0 Here's my etc/nut/ups.conf file: Code: # /etc/nut/ups.conf [Ultra] driver = powercom port = port=/dev/hidraw1 linevoltage = 120 manufacturer = Ultra modelname = ULTRA 700VA type = Trust methodOfFlowControl=dtr0rts1 shutdownArguments = {{7,10},y} Here's what I get when I run sudo upsdrvctl start: Code: eric at eric-desktop:~$ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - PowerCom protocol UPS driver 0.12 (2.4.3) Unable to open port=/dev/hidraw1: No such file or directory...

Hi, I have a little problem with PowerCom BNT600AP after running driver I see: root@rask> powercom -D /dev/ttyS1 Network UPS Tools - PowerCom and similars protocol UPS driver $ Revision: 0.5 $ (2.0.2) debug level is '1' Values of arguments: manufacturer : 'PowerCom' model name : 'Unknown' serial number : 'Unknown' line

..." is powercom ups.conf looks like this! Okay so APC1 is not and APC! [APC1] driver = powercom type = BNT port = /dev/ttyS1 numOfBytesFromUPS = 16 methodOfFlowControl = no_flow_control validationSequence = {{11,0x42},{8,0},{8,0}} shutdownArguments = {{1,30},y} modelname = BNT2000APT serialnumber = 2233445566 desc = Computer Room Small UPS I running /lib/nut/powercom -a APC1 -DDDDDDDDDD (Okay so the debugs are overboard!!!) Result is this! Network UPS Tools - PowerCom protocol UPS driver 0.12 (2.6.0) 0.0000...

Thank you for your response. The point is that I have configured my system to shut down at the event "upsc Inform@localhost ups.status"!="OL", not at "LB". So there will be no /etc/killpower file created. At an ups.status != "OL" event, the following script named "notifyme" is run: echo `date` >> /root/upsLog echo " No power, shutting