search for: sensore

The power sensors can be configured to sample the readout values over time. Nvidia does this too, so nouveau should probably do that too. Karol Herbst (4): iccsense: remove read function iccsense: convert to linked list iccsense: split sensor into own struct iccsense: configure sensors like nvidia does drm/nouveau/include/nvkm/subdev/iccsense.h | 6 +- drm/nouveau/nouveau_hwmon.c

Signed-off-by: Karol Herbst <nouveau at karolherbst.de> --- drm/nouveau/include/nvkm/subdev/iccsense.h | 1 + drm/nouveau/nvkm/subdev/iccsense/base.c | 141 ++++++++++++++++++++--------- drm/nouveau/nvkm/subdev/iccsense/priv.h | 15 ++- 3 files changed, 112 insertions(+), 45 deletions(-) diff --git a/drm/nouveau/include/nvkm/subdev/iccsense.h

Does anyone know of a cheap temperature sensor that will work with Linux? I don't need a fancy monitoring appliance, I just want a simple sensor that I can connect to one of my monitoring servers to let me know if the server room is getting hot. -- Bowie

Previously we parsed that table a bit wrong: 1. The entry layout depends on the sensor type used. 2. We have all resitors in one entry for the INA3221. 3. The config is already included in the vbios. This commit addresses that issue and with that we should be able to read out the right power consumption for every GPU with a INA209, INA219 and INA3221. Signed-off-by: Karol Herbst <karolherbst

The power sensors can be configured to sample the readout values over time. Nvidia does this too, so nouveau should probably do that too. v2: use list_del and rework an error message Karol Herbst (4): iccsense: remove read function iccsense: convert to linked list iccsense: split sensor into own struct iccsense: configure sensors like nvidia does

Signed-off-by: Karol Herbst <nouveau at karolherbst.de> --- drm/nouveau/nvkm/subdev/iccsense/base.c | 68 +++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/drm/nouveau/nvkm/subdev/iccsense/base.c b/drm/nouveau/nvkm/subdev/iccsense/base.c index b6f6222..6f3709e 100644 --- a/drm/nouveau/nvkm/subdev/iccsense/base.c +++ b/drm/nouveau/nvkm/subdev/iccsense/base.c @@

I need help. I have very big .csv files with many unnecessary columns. From the original .csv files I would like to create a new .csv file with just the columns I need. For example: The original column heading are: Date, Time, Location, Sensor Name, Sensor Serial, Ambient Temp, IR Temp, Sensor Name.1, Sensor Serial.1, Ambient Temp.1, IR Temp.1, Sensor Name.2, Sensor Serial.2, Ambient

Dear users, I'm quite a new french R-user, and I have a problem about doing a correlation matrix. I have temperature data for each weather station of my study area and for each year (for example, a data file for the weather station N?1 for the year 2009, a data file for the N?2 for the year 2010, ....). So I have 70 weather stations with one data file per year since 2005. Each station has 4

Hello everyone, I'm unable to read temperature Gigabyte H77-DH3H motherboard. Is that motherboard supported or am I doing it incorrectly? When trying to access hw.acpi.thermal everything appears to be ok, but it is not, the system always returns 27,8C and 29,8C which fooled me initially - the values never change. Here is output: [chinatsu]:/root# sysctl hw.acpi.thermal

This adds basic support for driving sensor chips off the nvidia i2c buses, along with basic support for reading the internal GPU sensor on supported chipsets. It's heavily cribbed off nvclock. Having scanned a large number of bioses, I'm pretty convinced that the appropriate i2c bus is always number 2 in the list on <g80 - I'm not sure about later cards yet. There's still a lot

Hi, We have several APC Smart UPSes (serial port/apcsmart) with the APC Temp/Humidity sensor cards (AP9612TH). The sensor cards have 2 plugs for 2 separate sensors. So far, we have only used one of the sensors in conjunction with the apcsmart module from nut. This has been working great. Example output: [nut at nut]# upsc APC11 ambient.humidity: 037.2 ambient.humidity.alarm.maximum: NO,NO

On Wed, Apr 1, 2020 at 12:33 PM Peter Kjellstr?m <cap at nsc.liu.se> wrote: > On Wed, 1 Apr 2020 10:01:04 +0530 > Thomas Stephen Lee <lee.iitb at gmail.com> wrote: > ... > > Thanks for the information ?. > > Rented a new EPYC Rome Server from Hetzner, but sensors does not show > > status of all cores in list, which is why I asked. > > Curious what

Hello, I'm having problems with lm_sensors on the motherboard Supermicro X6DH8-G2+ sensors-detect gives me the output attached in the textfile sensors-detect-output.txt As soon as I execute the recommended 'modprobe smbus-arp' I receive the following message: FATAL: Module smbus_arp not found. When I execute sensors, I receive the following:

This is my reproducible example: example<-structure(list(SENSOR = structure(1:6, .Label = c("A", "B", "C", "D", "E", "F"), class = "factor"), VALUE = c(270, 292.5, 0, 45, 247.5, 315), DATE = structure(1:6, .Label = c(" 01/01/2010 1", " 01/01/2010 2", " 01/01/2010 3", " 01/01/2010

A sample of the data I have is: > head(sensor) logged_on accx accy accz compassx compassy compassz gyrox gyroy gyroz 1 1326561428000 -0.4602 0.8346 0.0936 0.145508 -0.350586 0.259766 59.617390 28.521740 59.617390 2 1326561428050 -0.4212 1.0452 0.1326 0.219727 -0.321289 0.241211 88.695656 27.478260 88.695656 3 1326561428100 -0.2496 1.3416 0.2886 0.214844 -0.326172

Current uninitialized sensor detection does not work for me on nv4b and sensor returns crazy values (>190?C). It stabilises later, but it's too late - therm code shutdowns the machine... Let's just reset it on init. Signed-off-by: Marcin Slusarz <marcin.slusarz at gmail.com> --- drivers/gpu/drm/nouveau/core/subdev/therm/nv40.c | 12 +++++++++++- 1 file changed, 11

I am attempting to create an IDS appliance proof-of-concept using Xen to virtualize the management server and sensors. To keep things simple, I am just trying to get one domU sensor and the domU management VM working together for now, but plan on using multiple domU sensors eventually. The VMs are all configured and ready to go, but the problem I am running into is an inability to see all the

Last week I upgraded my box to CentOS 6 and I'm very impressed so far with it. The only small issue so far is that it doesn't seem to recognize the new Sandy Bridge Core i5 CPU that I have and you can't monitor its temperature. I recompiled the latest coretemp module from the latest 2.6.39 kernel and the latest lm_sensors version however this still wasn't enough as the new module

On Monday 12 December 2016 11:01:52 Nicolas Kovacs wrote: (first thing I'm going to do it buy a new keyboard, or employ a proof reader. Sorry for all the errors folks) > > First thing I would do is check the temperature. In my experience, > excessive heat is the main reason for unexpected shutdown operations. I have had this in the past where either the CPU or PSU fan had died.

On Monday 12 December 2016 12:15:10 David Both wrote: > The lm_sensors package is required for the sensors module of glances to > work. After installing lm_sensors, run sensors-detect. The sensors > command will show the sensors detected and their current values. glances > should then display the sensor readings. Somewhere tucked in the back of my mind a memory is screaming no.