search for: send_tri

So a month or more ago, I posted about continual disconnect messages from this UPS (roughly 2/hour), using nut 2.2.0 on debian etch. Now, I've finally gotten around to running tripplite_usb in debug mode, and these are the results: ... send_cmd(msg_len=2, type='L') send_cmd(msg_len=2, type='S') send_cmd(msg_len=2, type='B') send_cmd(msg_len=2, type='L')

I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports... I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the tripplite_usb module. I have already built and booted a new kernel with UHID disabled so that libusb can grab /dev/ugen0. At first I was able to get the following out of the driver: # USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u root

Hi I have a Tripp lite smartusb550 using fedora 3 (2.6.12-1.1381_FC3smp). Managed to establish communication with the ups using the tripplite_usb driver but get the following errors Any help to make it work will be appreciated cheers Julio -----------------------------------------------------------------------------------------------------------------------------------------------------

I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12. I originally tried the hidups driver which seemed to work, but produced a large amount of unhandled events. Then I tried the newhidups which told me my ups wasn't supported. When I try using tripplite_usb -u root -DDDD /proc/bus/usb/002/002 I get that there isn't a match. But when I try using tripplite_usb -DDDD

Hi, I'm running the latest version of NUT and with the above UPS and I keep getting the following error: "tripplite_usb[3308]: Error reading B value: Device detached? (error 0: could not claim interface 0: Device or resource busy)" The device keeps disconnecting and re-connecting until fails. I've tried to see if others are getting this - but I could not locate a

I've set up Samba and LPRng for HP printers with JetDirect cards. It works for one user at a time. But if the printer is off-line or busy, the samba client does not get an error message, but the job gets lost. :( I would like the print jobs to be spooled on Linux even when there is an active print job or when the printer is off-line. Unfortunately I'm not familiar with lpd. The

Anyone successfully using a HP 8000 DN or HP 5 Lsi (with JetDirect module and assigned IP) with samba? Subject says it all. If you're successfully doing this, what configs made it work? FAQs tell how to set up with a print server, but what if the printer itself is the server? Trust me, the HP doesn't know jack about port 139. Using samba 2.0.4 on Solaris 7 and NT 4.0 SP5 with

Hello, It seems that I am in printer hell once again :) I am trying to sort out some printer problems with our UNIX server. The basic problem is this. I have a test server to K.I.S.S the problem. On this server I have defined two queues which are csqlis and HPfinley. csqlis seems to work correctly and displays ready. HPfinley always reads Paused on win2k and NT40 clients. The output of the lpq