search for: sekret

On Jun 7, 2017, at 1:14 PM, Roger Price wrote: > > 2. On the NAS, use command > > upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS Robbie, The "upsrw" command contacts upsd, so it sounds like you should be able to add a user to upsd.users on the NAS, and then run something like this on the Mac: upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS at synology Per http://networkupstools.org/docs/man/ups...

...tdown -h +0? which was before SHUTDOWNCMD "" SHUTDOWNCMD ?? Didn?t make sense to me. > You will need the utility programs upsrw and upscom which are part of NUT, but they should be available in the Mac. upsrw is available on the Mac: upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS I suppose I have to use -u for user? Which user? and -p for password? What does -s sekret UPS means? -s means variable to be changed but I don?t know which variable this is, sekret. Kind regards, Rob > On 8 Jun 2017, at 11:30, Roger Price <roger at rogerprice.org> wrot...

...l: Checking token "NSS Certificate DB" in slot "NSS User Private Key and Certificate Services" < 0> rsa df7b376946c8cfe59d74095dfc4b882d081b981b gold My upsd.conf is # upsd.conf LISTEN 0.0.0.0 3493 CERTPATH /etc/nut/NSS_db CERTIDENT gold sekret but when I run systemctl start nut-server I get the message Jul 10 15:02:51 gold upsd[15961]: Connected to UPS [heartbeat]: dummy-ups-heartbeat Jul 10 15:02:51 gold upsd[15961]: Connected to UPS [Eaton]: usbhid-ups-Eaton Jul 10 15:02:51 gold upsd[15961]: listening on 0.0.0.0 port 3493 Jul 10 15:0...

>> I am running NUT on a Synology NAS with attached a USB APC UPS. > > Do you have upsd and upsmon running as daemons on the Synology DSM? > Yes I have them both running on the Synology DSM: root 7236 1 0 Jun01 ? 00:00:16 /usr/sbin/upsd root 7741 1 0 Jun01 ? 00:00:00 /usr/sbin/upsmon root 7744 7741 0 Jun01 ? 00:00:12

...; Setting "slave" says that upsmon on the Mac is to shutdown the Mac as soon as LB is detected in the NAS. On the Mac I have in upsmon.conf MONITOR ups@<ip address> 1 <user> <password> slave 2. On the NAS, use command upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS to set the low limit very high during testing. This will speed up your testing. You can reset it to something else later. When I run this command: upsc ups at localhost: battery.charge.low: 10 The commando upsrw cannot be found on the Synology NAS? -------------- next part -------...

> The "upsrw" command contacts upsd, so it sounds like you should be able to add a user to upsd.users on the NAS, and then run something like this on the Mac: > > upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS at synology > > Per http://networkupstools.org/docs/man/upsd.users.html <http://networkupstools.org/docs/man/upsd.users.html> , the "upsmaster" user would need at least "actions = SET". You will need to reload upsd after changing upsd.users. I managed to do t...

This is a follow-on to the "SQL field format for digest-md5?" thread. After some additional debugging, I've found the problem is a mismatch in what Dovecot expects and Postfix uses for the user and realm. For a username "user at example.com" and password "sekret", Dovecot expects: username = "user" realm = "example.com" but Postfix sends the checksum of: username = "user at example.com" realm = "" How do I fix this?

Hello, I have just installed the plugin. Can somebody tell me how create some users in the ''users'' table. Is there a doc explaining how to use the plugin for a newbie? Thanks Juanma -- Posted via http://www.ruby-forum.com/.

...ntication (don't ask). I've recompiled the cifs kernel module to allow plaintext authentication, using the stock Ubuntu 7.10 kernel (2.6.22.9c). My /etc/fstab line looks like... //superman/www-pub /smb/superman/www-pub cifs auto,uid=33,gid=33,username=WORKGROUP/www-pub,password=sekret,sec=none 0 0 The contents of /proc/fs/cifs/* are as follows: :::::::::::::: DebugData :::::::::::::: Display Internal CIFS Data Structures for Debugging --------------------------------------------------- CIFS Version 1.49 Active VFS Requests: 0 Servers: Sha...

...you should be clear that this is what you want to do. > Is there some way I can test my setup without having to deplete and recharge > my UPS every iteration? How about temporarily setting the battery.charge.low to some very high value: upsrw -s battery.charge.low=90 -u <user> -p sekret my-UPS I suggest adding something like the following lines to the top of upssched-cmd so that you can include the value of $CHMSG in all your messages. STATUS=$( upsc $UPS ups.status ) CHARGE=$( upsc $UPS battery.charge ) CHMSG="[$STATUS]:$CHARGE%" This will give you a clearer i...

...ful warnings is ok, but you should be clear that this is what you want to do. Thanks for the clarification. Yes, this is _exactly_ what I wanted to do > How about temporarily setting the battery.charge.low to some very high value: > > upsrw -s battery.charge.low=90 -u <user> -p sekret my-UPS > > I suggest adding something like the following lines to the top of upssched-cmd Thanks for the suggestions. I’ve successfully done both of these, and see the message [FSD OB DISCHRG LB] 87% successfully output in a dialog. > On 9 Jun 2019, at 19:55, Charles Lepple <cle...

...e.low = 10.4default.battery.voltage.nominal = 13.1[CODE] Now, on to the ?'upsmon.conf' ?file. ?I am a bit lost as to what all is required in this file. ?Lookingat just the first part of the example from Price, I see : [CODE]# /etc/ups/upsmon.conf?MONITOR Eaton-66781 at localhost 1 upsmaster sekret master?MINSUPPLIES 1?SHUTDOWNCMD "/sbin/shutdown -h +0"?NOTIFYCMD /usr/sbin/upssched?POLLFREQ 5?POLLFREQALERT 5?HOSTSYNC 15?DEADTIME 15?POWERDOWNFLAG /etc/killpower[CODE] I have modified the MONITOR line as appropriate for my system but wonder about a coupleof entries. ?The referenced bin...

...ng like if [[ "$St" =~ "OL" ]]; then SYSLOG "WARNING: UPS is On-Line" return This assumes that the NAS supports the =~ operator of Bash 4. To reduce the long wait: in the NAS you need to execute upsrw -s battery.charge.low=85 -u <upsuser> -p sekret <myups> Better is to set this value in the NAS ups.conf. Roger

...Thu, 8 Jun 2017, Robbie van der Walle wrote: > The "upsrw" command contacts upsd, so it sounds like you should be able to add a user to upsd.users on the NAS, and then run something like > this on the Mac: > > ??upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS at synology > > Per?http://networkupstools.org/docs/man/upsd.users.html?, the "upsmaster" user would need at least "actions = SET". You will need to reload > upsd after changing upsd.users. > > I managed to do this, upsc reports:? > > batte...

...> preserve battery as much as possible. "Shortly after" means using timers. If you want to preserve the battery charge, but not use timers, you need to use a combination of OB and LB and set your LB level high using a command such as upsrw -s battery.charge.low=60 -u upsmaster -p sekret my-ups Roger

...slave Setting "slave" says that upsmon on the Mac is to shutdown the Mac as soon as LB is detected in the NAS. I suggest 1. Shutting down on LB rather than on a timer since it's easier to set up. 2. On the NAS, use command upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS to set the low limit very high during testing. This will speed up your testing. You can reset it to something else later. Roger

...t goes "OB DISCHRG" > 3. I enter `upsmon -c fsd` Does upsmon.conf specify a shutdown on LB? What happens if you let the battery power the system until LB is reached? You could set LB to say 85% for more rapid testing with upsrw -s battery.charge.low=85 -u <upsuser> -p <sekret> my-ups at localhost > 4. System shuts down and sending `upsdrvctl shutdown` > 5. System seems to halt and about one minute later the UPS shuts down > 6. Main power comes back > !!! 7. UPS comes up, display shows power comes from battery, RasPi comes up, nut showing "OL DISCHRG...

An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200217/b486de30/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: usbhid.zip Type: application/zip Size: 4031 bytes Desc: not available URL:

...into the upsmon.conf file and commented out the "online" and "onbatt" NOTIFYFLAG messages. I then did a reload of upsmon...but found I was still getting the messages. Long story short, my upsmon.conf file now consists of a single entry: MONITOR rtdups at localhost 1 upsmaster sekret master I'm still getting the onbattery, online, comm good, comm bad, etc system messages. Clearly there is some default behavior going on. How do I keep these system messages from happening? Thanks Rob -------------- next part -------------- An HTML attachment was scrubbed... URL: <h...

...er.version.internal: 0.41 ups.beeper.status: enabled ups.delay.shutdown: 60 ups.delay.start: 70 ups.load: 14 ups.mfr: CPS ups.model: ST Series ups.realpower.nominal: 375 ups.timer.shutdown: -60 ups.timer.start: -60 upsmon.conf excerpts: RUN_AS_USER root MONITOR cyberpower at localhost 1 monserver sekret master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD /sbin/upssched POLLFREQ 5 POLLFREQALERT 5 DEADTIME 15 POWERDOWNFLAG /etc/nut/killpower ... RBWARNTIME 43200 NOCOMMWARNTIME 300 FINALDELAY 5 upssched.conf excerpt: AT LOWBATT cyberpower at localhost START-TIMER shutdowncri...