search for: seagates

FYI, Seagate has announced a new enterprise SSD. The specs appear to be competitive: + 2.5" form factor + 5 year warranty + power loss protection + 0.44% annual failure rate (AFR) (2M hours MTBF, IMHO too low :-) + UER 1e-16 (new), 1e-15 (5 years) + 30,000/25,000 4 KB read IOPS (peak/aligned zero offset) + 30,000/10,500 4 KB write IOPS (peak/aligned zero offset)

I am attempting to install 7.1-BETA2 (from CD) onto a PC with a Promise SX4060 RAID controller and two Seagate 120GB ATA disk drives. The boot from CD keeps repeating the following (error) messages: (I'm retyping here) ============================================================================ ================== ad4: WARNING - SETFEATURES SET TRANSFER MODE task queue timeout - completing

hi guys I have rather a large set of Seagate's SAS ST32000444SS, over a hundred - experience I'm having from those in conjunction with their tech support is abysmal. I'm trying to update firmware of these drives and nothing works, including tech support. ... and I cannot help but wonder - is just me who is so unlucky and getting very, very poor support(taking naturally only of

Happy Friday, List! I''m spec''ing out a Thumper-esque solution and having trouble finding my favorite Hitachi Ultrastar 2TB drives at a reasonable post-flood price. The Seagate Constellations seem pretty reasonable given the market circumstances but I don''t have any experience with them. Anybody using these in their ZFS systems and have you had good luck? Also, if

Help - (I'm new to the list, so please be gentle) I've tried Seagate support, and Apple Forums with no resolution or adequate suggestions for troubleshooting/resolving this issue, so I thought I'd try the samba community. It's a bit esoteric for me/most Mac users (SMB shares under Max OS X), but I thought I'd give it a try. I can no longer mount any shares from my Seagate

I updated the machine that I use for a web/email server last night to 5.9, and I have this in the logwatch report this morning: QUOTE: --------------------- Smartd Begin ------------------------ Warnings: Device: /dev/sda [SAT], WARNING: There are known problems with these drives, - 1 Time(s) **Unmatched Entries** smartd 5.42 2011-10-20 r3458 [x86_64-linux-2.6.18-348.el5] (local

On 26/09/18 20:19, Mauricio Tavares wrote: > If ti makes you feel any better, I am not having stellar service from > WD's support. In fact, they act like they never received the HD I sent > for RMA whose tracking number says they did 10 days ago. > > On Wed, Sep 26, 2018 at 2:16 PM, lejeczek via CentOS <centos at centos.org> wrote: >> hi guys >> >> I have

Hi, Does anyone use Seagate ST32000542AS disks with ZFS? I wonder if the performance is not that ugly as with WD Green WD20EARS disks. Thanks, -- Piotr Jasiukajtis | estibi | SCA OS0072 http://estseg.blogspot.com

All, I have a problem with a new Seagate hard disk. The problem occurs when i go to install CentOS, i insert the cd and start the boot up process, when it gets to the section where it detects the hard disks, the driver is seems crashes, the message it produces complains about no one caring about a interrupt on IRQ11. The hard disk is a Seagate 200GB 8MB SATA150 NCQ drive, on a SilliconImage

Hi there, http://www.seagate.com/support/disc/download/seatoold_en.exe Seagate offers a Windows executable (needs Win98 or better, 1,9MB) that should create 2 bootable floppy disks that contain a harddrive check program. Invoking "wine seatoold_en.exe" works, but when the floppy should be written, an error occurs "insert 1.44 MB...click retry". I tried to mount a DOS

On Wed, Sep 26, 2018 at 3:37 PM, lejeczek via CentOS <centos at centos.org> wrote: > > > On 26/09/18 20:19, Mauricio Tavares wrote: >> >> If ti makes you feel any better, I am not having stellar service from >> WD's support. In fact, they act like they never received the HD I sent >> for RMA whose tracking number says they did 10 days ago. >>

On 26/09/18 19:16, lejeczek via CentOS wrote: > hi guys > > I have rather a large set of Seagate's SAS ST32000444SS, over a > hundred - experience I'm having from those in conjunction with their > tech support is abysmal. > > I'm trying to update firmware of these drives and nothing works, > including tech support. > > ... and I cannot help but wonder -

I''m trying to configure a DELL R720 (not a pleasant experience) which has an H710p card fitted. The H710p definitely doesn''t support JBOD, but the H310 looks like it might (the data sheet mentions non-RAID). Has anyone used one with ZFS? Thanks, -- Ian.

Hi list, I''ve got a system with 3 WD and 3 seagate drives. Today I got an email that zpool status indicated one of the seagate drives as REMOVED. I''ve tried clearing the error but the pool becomes faulted again. Taken out the offending drive and plugged into a windows box with seatools install. Unfortunately seatools finds nothing wrong with the drive. Windows seems to see

Hi all, As a disclaimer, I'm new to this list and very green administering CentOS. I run it on my test servers and do very basic networking and server administration (most users, permissions, and web app stuff). I have a backup server that I am using rsync to collect important in-process file for our digital library from both Windows and Linux servers, as well as a specific applications

Ok, this is not a OpenSolaris question, but it is a Solaris and ZFS question. I have a pool with three mirrored vdevs. I just got an error message from FMD that read failed from one on the disks,(c1t6d0). All with instructions on how to handle the problem and replace the devices, so far everything is good. But the zpool still thinks everything is fine. Shouldn''t zpool also show

Hi, I've got Samba 2.0.2 on a Linux Red Hat 5.2 and a server NT4 SP3 with Seagate BackupExec 7.0. When I want to backup Samba with Seagate BackupExec, I get a message saying "Unable to connect to server, <F5> to retry", and then another one saying "A device specific error occured". I've read all the Samba archive about that subject, but I do not find any

Hi all, I''m getting a very strange problem with a recent OpenSolaris b134 install. System is: Supermicro X5DP8-G2 BIOS 1.6a 2x Supermicro AOC-SAT2-MV8 1.0b 11 Seagate Barracuda 1TB ES.2 ST31000340NS drives If I have any of the 11 1TB Seagate drives plugged into the controller, the AOC-SAT2-MV8 BIOS appears to detect them just fine, but I get the following problems: 1. Grub takes a

Hi, I'm searching for 2 months on this problem (I've searched in the archive of course and I've sent a message on this mailing list, the suggestions had helped me but I didn't manage to resolve the problem). The problem: ------------ I've got Samba 2.0.2 on a Linux Red Hat 5.2 and a server NT4 SP3 with Seagate BackupExec 7.0. When I want to backup Samba with Seagate

hi fellas I wonder if any of you use(d) dl_sea_fw to flash SAS drive? I try dl_sea_fw-0.2.3_64 to flash ST32000444SS but it fails: $ ./linux\ cli\ tools/dl_sea_fw-0.2.3_64 -m ST32000444SS -f firmware/MU-SAS-0008.LOD -d /dev/sg59 ================================================================================ ?Seagate Firmware Download Utility v0.2.3 Build Date: Jan? 9 2013 ?Copyright (c)