Displaying 5 results from an estimated 5 matches for "sdf3".
Did you mean:
sda3
2013 Mar 03
4
Strange behavior from software RAID
...e raid1 sdc3[0]
455482816 blocks [2/1] [U_]
md0 : active raid1 sdd1[3] sdc1[0] sdb1[1] sda1[2]
1000320 blocks [4/4] [UUUU]
md127 : active raid1 sdd3[1] sdb3[0]
971747648 blocks [2/2] [UU]
md3 : active raid1 sdf1[1] sde1[0]
1003904 blocks [2/2] [UU]
md4 : active raid1 sdf3[1] sde3[0]
1948491648 blocks [2/2] [UU]
md1 : active raid1 sda3[1]
455482816 blocks [2/1] [_U]
unused devices: <none>
There are six physical disks in this system:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
Disk /dev/sdc: 500.1...
2011 Jan 13
6
bug: kernel 2.6.37-12 READ FPDMA QUEUED
I''ve been trying to install a 2.6.37-12 kernel from kernel-ppa on one of
my Ubuntu machines without success.
It keeps giving errors like this:
[ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10
frozen
[ 9.115550] ata9.00: failed command: READ FPDMA QUEUED
[ 9.115556] ata9.00: cmd 60/04:00:
d4:82:85/00:00:1f:00:00/40 tag 0 ncq 2048 in
[ 9.115557]
2016 Nov 05
3
Avago (LSI) SAS-3 controller, poor performance on CentOS 7
...sending port enable !!
mpt3sas_cm0: host_add: handle(0x0001), sas_addr(0x500605b00aee5510), phys(8)
mpt3sas_cm0: port enable: SUCCESS
# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4] [raid1]
md0 : active raid1 sda2[0] sdb2[1]
999360 blocks super 1.0 [2/2] [UU]
md1 : active raid5 sdf3[6] sde3[4] sdd3[3] sdc3[2] sda3[0] sdb3[1]
19528458240 blocks super 1.2 level 5, 64k chunk, algorithm 2
[6/5] [UUUUU_]
[====>................] recovery = 22.1% (864374932/3905691648)
finish=417.0min speed=121538K/sec
bitmap: 1/30 pages [4KB], 65536KB chunk
unused devices...
2008 May 14
2
Dividing Two Dataframes
Hi,
I have two dataframes one with 144 rows and 160 columns (SDF1) and one with
12 rows and 160 columns (SDF2).
Now I'm trying to divide rows 1:12 with SDF2, rows 13:24 with SDF2, rows
25:36 with SDF 2, .
In S-Plus the following code works fine:
DFS = SDF1[1:144,1:60] / as.vector(SDF2[1:12,1:160])
but in R when I try to implement the formula I get the following error:
"/
2019 Jul 08
2
Server fails to boot
First some history. This is an Intel MB and processor some 6 years old,
initially running CentOS 6. It has 4 x 1TB sata drives set up in two
mdraid 1 mirrors. It has performed really well in a rural setting with
frequent power cuts which the UPS has dealt with and auto shuts down the
server after a few minutes and then auto restarts when power is restored.
The clients needed a Windoze server