search for: sde3

...rror 15: File not found Press any key to continue... If I press any key, I get a garbled screen that is nearly impossible to read. So, I rebooted from the DVD in rescue mode, ran fdisk to verify that the partitions are set up correctly, ran e2fsck on all three formatted partitions (sde1 - /boot, sde3 - /, sde6 - /home), ran e2label to make sure the labels are set correctly and everything checks out. All the file images are present in /boot where they should be, and the device map shows hd1 is /dev/sde3. Is my disk rotten or something? Everything is in the right place (so far) but it won'...

...sdc3[0] 455482816 blocks [2/1] [U_] md0 : active raid1 sdd1[3] sdc1[0] sdb1[1] sda1[2] 1000320 blocks [4/4] [UUUU] md127 : active raid1 sdd3[1] sdb3[0] 971747648 blocks [2/2] [UU] md3 : active raid1 sdf1[1] sde1[0] 1003904 blocks [2/2] [UU] md4 : active raid1 sdf3[1] sde3[0] 1948491648 blocks [2/2] [UU] md1 : active raid1 sda3[1] 455482816 blocks [2/1] [_U] unused devices: <none> There are six physical disks in this system: Disk /dev/sda: 500.1 GB, 500107862016 bytes Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes Disk /dev/sdc: 500.1 GB, 500...

Hello Hendrik Can you help input 2 commands 'mount' and 'df -TPh' on OMV, and post the output to us, thank you. -- Regards, Jones Syue | ??? QNAP Systems, Inc.

...6KL5-part1 fuse.mergerfs 11T 6,6T 3,7T 65% /export/Paperless media/678c601d-8d2e-4be0-9226-d20a6f772f8b:media/1e9433cd-993d-4af7-9114-fb761bccdbbf:srv/dev-disk-by-label-Big5:srv/dev-disk-by-id-ata-ST4000DM005-2DP166_ZDH26KL5-part1 fuse.mergerfs 11T 6,6T 3,7T 65% /export/Daten /dev/sde3 btrfs 53G 17G 33G 34% /srv/dev-disk-by-label-DockerImages /dev/sdg...

I''ve been trying to install a 2.6.37-12 kernel from kernel-ppa on one of my Ubuntu machines without success. It keeps giving errors like this: [ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10 frozen [ 9.115550] ata9.00: failed command: READ FPDMA QUEUED [ 9.115556] ata9.00: cmd 60/04:00: d4:82:85/00:00:1f:00:00/40 tag 0 ncq 2048 in [ 9.115557]

...port enable !! mpt3sas_cm0: host_add: handle(0x0001), sas_addr(0x500605b00aee5510), phys(8) mpt3sas_cm0: port enable: SUCCESS # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] [raid1] md0 : active raid1 sda2[0] sdb2[1] 999360 blocks super 1.0 [2/2] [UU] md1 : active raid5 sdf3[6] sde3[4] sdd3[3] sdc3[2] sda3[0] sdb3[1] 19528458240 blocks super 1.2 level 5, 64k chunk, algorithm 2 [6/5] [UUUUU_] [====>................] recovery = 22.1% (864374932/3905691648) finish=417.0min speed=121538K/sec bitmap: 1/30 pages [4KB], 65536KB chunk unused devices: <no...

.../www.cyberciti.biz/faq/recover-bad-superblock-from-corrupted-partition/ using command; dumpe2fs /dev/sda3 | grep superblock error message is; dumpe2fs: No such file or directory while trying to open /dev/sda3 Couldn't find valid filesystem superblock. if i enter command; dumpe2fs /dev/sde3 | grep superblock superblock info is shown. why is sde working and not sda? this system has previously held 6.8, but partitioning was off in cylinders so i decided to correct. purchased latest release of partedmagic, booted, created new partitioning by cylinders. under pmagic, when i enter com...

First some history. This is an Intel MB and processor some 6 years old, initially running CentOS 6. It has 4 x 1TB sata drives set up in two mdraid 1 mirrors. It has performed really well in a rural setting with frequent power cuts which the UPS has dealt with and auto shuts down the server after a few minutes and then auto restarts when power is restored. The clients needed a Windoze server