search for: sde1

Hi - relatively inexperienced user here. I installed CentOS 5.2 yesterday (http install via a mirror, worked brilliantly), as well as a new Seagate 1Tb USB external HDD (from the new Xtreme line), for backup/media storage. Using fdisk I put two primary partitions on the Seagate, /dev/sde1 and /dev/sde2 (roughly half the drive each). Then I used mkfs.ext3 on both to create ext3 filesystems on those partitions. My fstab entries look like so: /dev/sde1 /mnt/seagate1 ext3 rw,user,noexec 0 0 /dev/sde2 /mnt/seagate2 ext3 rw,user,noexec 0 0 I...

...% /bricks/sdb1 /dev/sdc1????????????????????????? 7.3T? 630G? 6.7T?? 9% /bricks/sdc1 /dev/sdc1????????????????????????? 7.3T? 630G? 6.7T?? 9% /bricks/sdc1 /dev/sdd1????????????????????????? 7.3T? 683G? 6.7T? 10% /bricks/sdd1 /dev/sdd1????????????????????????? 7.3T? 683G? 6.7T? 10% /bricks/sdd1 /dev/sde1????????????????????????? 7.3T? 657G? 6.7T?? 9% /bricks/sde1 /dev/sde1????????????????????????? 7.3T? 658G? 6.7T?? 9% /bricks/sde1 /dev/sdf1????????????????????????? 7.3T? 711G? 6.6T? 10% /bricks/sdf1 /dev/sdf1????????????????????????? 7.3T? 711G? 6.6T? 10% /bricks/sdf1 /dev/sdg1????????????????????...

Hello! I''m using ArchLinux with kernel Linux horus 3.10.5-1-ARCH #1 SMP PREEMPT. Mounting and unmounting takes a long time: # time mount -v /mnt/Archiv mount: /dev/sde1 mounted on /mnt/Archiv. mount -v /mnt/Archiv 0,00s user 0,16s system 1% cpu 9,493 total # sync && time umount -v /mnt/Archiv umount: /mnt/Archiv (/dev/sdd1) unmounted umount -v /mnt/Archiv 0,00s user 0,33s system 1% cpu 23,247 total fstab: LABEL=Archiv /mnt/Archiv btrfs...

...a community, I am facing the following problem. I have the following share in my /etc/samba/smb.conf: [external] comment = "External Hard Drive" path = /mnt/external read only = no Sometimes it happens that external hard drive fails. Kernel issues USB reset and the device /dev/sde1 in example below becomes invalid/inaccessible: Dec 26 21:41:03.523585 kernel: usb 5-2: reset high-speed USB device number 3 using ehci-pci Dec 26 21:41:03.979588 kernel: usb 5-2.1: new high-speed USB device number 100 using ehci-pci Dec 26 21:41:04.167542 kernel: usb 5-2.1: New USB device found, i...

...rpc.mountd[10570]: Caught signal 15, un-registering and exiting. Oct 28 16:34:17 linux-fs01 systemd: Stopped NFS Mount Daemon. Oct 28 16:34:17 linux-fs01 systemd: Stopped target Local File Systems. Oct 28 16:34:17 linux-fs01 systemd: Unmounting /rsnapshot... Oct 28 16:34:17 linux-fs01 kernel: XFS (sde1): Unmounting Filesystem Oct 28 16:34:19 linux-fs01 kernel: XFS (sde1): metadata I/O error: block 0x2800ccac8 ("xlog_iodone") error 5 numblks 64 Oct 28 16:34:19 linux-fs01 kernel: XFS (sde1): xfs_do_force_shutdown(0x2) called from line 1221 of file fs/xfs/xfs_log.c. Return address = 0xffff...

Ok guys & gals here is the scenario: 1.) Host RHEL 4 U3 2.6.9-34.0.2.EL 2.) OCFS2 latest version 3.) Successfully formatted & mounted OCFS2 filesystems on 2 nodes /dev/sdb1 /u02/oradata/usdev/voting /dev/sdc1 /u02/oradata/usdev/data01 /dev/sdd1 /u02/oradata/usdev/data02 /dev/sde1 /u02/oradata/usdev/data03 4.) Downloaded & installed ASMLib 2.0 on both nodes 5.) Ran /etc/init.d/oracleasm configure 6.) Ran /etc/init.d/oracleasm createdisk vol1 /dev/sdc1 Error: asmtool: unable to clear device /dev/sdc1 7.) Shutdown node 2 8.) Ran /etc/init.d/oracleasm createdisk vol1 /dev...

...e. After doing so, I should be able to run scsi_id -g -s /dev/sd* and get proper results. I've modified file /etc/scsi_id.config appropriately: [root at psrwjmsafs1 etc]# grep options /etc/scsi_id.config vendor="ATA",options=-p 0x80 options=-g but whenever I run scsi_id -g -s /b/sde1 - i get nothing. [root at psrwjmsafs1 etc]# df -k |grep sde /dev/sde1 1754602560 93383616 1572090328 6% /test How come? Am i missing something? Thank you! Asya

...of problems and I managed to overcome them by passing libata.force=noncq for a couple of weeks, until it failed generally). Now that the disk is on the intel contoller it works fine and data is intact, but whenever I do mount or unmount I see: Aug 10 18:34:47 MyServerHere kernel: btrfs: bdev /dev/sde1 errs: wr 0, rd 0, flush 0, corrupt 166, gen 0 The problem is "corrupt 166" Sofar I did: 1. btrfsck and it reported everything is OK 2. btrfs scrub start /dev/sde1 and it again reported all is OK Am I missing something in my filesystem checks or there is another way to zero the corrupt...

...It's RAID 5, /dev/sdb *also* appears to have died. If I do mdadm --assemble --force -v /dev/md0 /dev/sd[cefgdh]1 mdadm: looking for devices for /dev/md0 mdadm: /dev/sdc1 is identified as a member of /dev/md0, slot 0. mdadm: /dev/sdd1 is identified as a member of /dev/md0, slot -1. mdadm: /dev/sde1 is identified as a member of /dev/md0, slot 2. mdadm: /dev/sdf1 is identified as a member of /dev/md0, slot 3. mdadm: /dev/sdg1 is identified as a member of /dev/md0, slot 4. mdadm: /dev/sdh1 is identified as a member of /dev/md0, slot -1. mdadm: no uptodate device for slot 1 of /dev/md0 mdadm: add...

Hi, This is my current config: /dev/md0 -> 200 MB -> sda1 + sdd1 -> /boot /dev/md1 -> 36 GB -> sda2 + sdd2 -> form VolGroup00 with md2 /dev/md2 -> 18 GB -> sdb1 + sde1 -> form VolGroup00 with md1 sda,sdd -> 36 GB 10k SCSI HDDs sdb,sde -> 18 GB 10k SCSI HDDs I have added 2 36 GB 10K SCSI drives in it, they are detected as sdc and sdf. What should I do if I want to optimize disk space? The simplest solution would be to create /dev/md3 out of sdc1 and...

...ng the proper process. Now due to that, I would need to remount the drive when the script runs if it wasn't unplugged and replugged to trigger the automount. Problem is, it is not certain that the same drive will be used so I cannot simply hard code a line that just do a mount -t ntfs-3g /dev/sde1 /media/backup. I cannot assume it would always be say /dev/sde1 or /dev/sdf2 as that depends on how many drives are connected before that and how was that particular drive partitioned. The inbuilt auto mount mechanism also appears to use different mountpoints for different USB drives (based on dri...

...M 0 442M 0% /dev/shm ====================================================== Each night, in addition to our tape backup paradigm, an rsync script is run which mounts /dev/sdb1 on /mnt/sysinfo and copies system data from sda1 there. /dev/sdb1 is a 146GB drive. The script then mounts /dev/sde1 on /mnt/userdata for a copy of /home and /home/adminusers. /dev/sde1 is a wholly underutilized 300G drive. I'd like to move the contents of /home/adminusers from /dev/sdd1 to /dev/sdc1 and use that underutilized drive elsewhere. What's the least invasive way of doing this given the ha...

...have died. If I do >> mdadm --assemble --force -v /dev/md0 /dev/sd[cefgdh]1 mdadm: looking for >> devices for /dev/md0 mdadm: /dev/sdc1 is identified as a member of >> /dev/md0, slot 0. >> mdadm: /dev/sdd1 is identified as a member of /dev/md0, slot -1. >> mdadm: /dev/sde1 is identified as a member of /dev/md0, slot 2. >> mdadm: /dev/sdf1 is identified as a member of /dev/md0, slot 3. >> mdadm: /dev/sdg1 is identified as a member of /dev/md0, slot 4. >> mdadm: /dev/sdh1 is identified as a member of /dev/md0, slot -1. >> mdadm: no uptodate devi...

...ing...) Brought it up, RAID not working. I finally found that I had to do an mdadm --stop /dev/md0, then I could do an assemble, then I could add the new drive. But: it's now cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active (auto-read-only) raid5 sdg1[8](S) sdh1[7] sdf1[4] sde1[3] sdd1[2] sdc1[1] 23441313792 blocks super 1.2 level 5, 512k chunk, algorithm 2 [7/5] [_UUUU_U] bitmap: 0/30 pages [0KB], 65536KB chunk unused devices: <none> and I can't mount it (it's xfs, btw). *Should* I make it readwrite, or is there something else I should do?...

...em. I have the following share in my > /etc/samba/smb.conf: > > [external] > comment = "External Hard Drive" > path = /mnt/external > read only = no > > Sometimes it happens that external hard drive fails. Kernel issues USB reset and > the device /dev/sde1 in example below becomes invalid/inaccessible: > > Dec 26 21:41:03.523585 kernel: usb 5-2: reset high-speed USB device number 3 using ehci-pci > Dec 26 21:41:03.979588 kernel: usb 5-2.1: new high-speed USB device number 100 using ehci-pci > Dec 26 21:41:04.167542 kernel: usb 5-2.1: New...

Hallo, linux-btrfs, First I create an array of 2 disks with mkfs.btrfs -d raid0 -m raid1 /dev/sdb1 /dev/sdd1 and mount it at /srv/MM. Then I fill it with about 1,6 TByte. And then I add /dev/sde1 via btrfs device add /dev/sde1 /srv/MM btrfs filesystem balance /srv/MM (it run about 20 hours) Then I work on it, copy some new files, delete some old files - all works well. Only df /srv/MM btrfs filesystem df /srv/MM show some completely wrong values: # df /srv/MM Filesystem...

...m --assemble --force -v /dev/md0? /dev/sd[cefgdh]1 mdadm: looking for >>>> devices for /dev/md0 mdadm: /dev/sdc1 is identified as a member of >>>> /dev/md0, slot 0. >>>> mdadm: /dev/sdd1 is identified as a member of /dev/md0, slot -1. >>>> mdadm: /dev/sde1 is identified as a member of /dev/md0, slot 2. >>>> mdadm: /dev/sdf1 is identified as a member of /dev/md0, slot 3. >>>> mdadm: /dev/sdg1 is identified as a member of /dev/md0, slot 4. >>>> mdadm: /dev/sdh1 is identified as a member of /dev/md0, slot -1. >>...

...h the inodes running out of space, but the actual disk space on the arb server running low. This is the df -h? output for the bricks on the arb server: /dev/sdd1 15G 12G 3.3G 79% /data/glusterfs/gv1/brick3 /dev/sdc1 15G 2.8G 13G 19% /data/glusterfs/gv1/brick1 /dev/sde1 15G 14G 1.6G 90% /data/glusterfs/gv1/brick2 And this is the df -hi? output for the bricks on the arb server: /dev/sdd1 7.5M 2.7M 4.9M 35% /data/glusterfs/gv1/brick3 /dev/sdc1 7.5M 643K 6.9M 9% /data/glusterfs/gv1/brick1 /dev/sde1 6.1...

.../dev/sd[cefgdh]1 mdadm: >>>>>> looking for devices for /dev/md0 mdadm: /dev/sdc1 is identified >>>>>> as a member of /dev/md0, slot 0. >>>>>> mdadm: /dev/sdd1 is identified as a member of /dev/md0, slot -1. >>>>>> mdadm: /dev/sde1 is identified as a member of /dev/md0, slot >>>>>> 2. >>>>>> mdadm: /dev/sdf1 is identified as a member of /dev/md0, slot 3. >>>>>> mdadm: /dev/sdg1 is identified as a member of /dev/md0, slot 4. >>>>>> mdadm: /dev/sdh1 is iden...

...with the inodes running out of space, but the actual disk space on the arb server running low. This is the df -h? output for the bricks on the arb server:/dev/sdd1 ? ? ? ? ? ? ?15G ? 12G ?3.3G ?79% /data/glusterfs/gv1/brick3/dev/sdc1 ? ? ? ? ? ? ?15G ?2.8G ? 13G ?19% /data/glusterfs/gv1/brick1/dev/sde1 ? ? ? ? ? ? ?15G ? 14G ?1.6G ?90% /data/glusterfs/gv1/brick2 And this is the df -hi? output for the bricks on the arb server:/dev/sdd1 ? ? ? ? ? ? ?7.5M ?2.7M ?4.9M ? 35% /data/glusterfs/gv1/brick3/dev/sdc1 ? ? ? ? ? ? ?7.5M ?643K ?6.9M ? ?9% /data/glusterfs/gv1/brick1/dev/sde1 ? ? ? ? ? ? ?6.1M ?3...