search for: sdb7

...ebooted it, i need to rebuild the 2nd HDD again in the 2nd Server i don't know what went wrong. Here's my dmesg in my 1st server specific in md: md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: Autodetecting RAID arrays. md: autorun ... md: considering sdb7 ... md: adding sdb7 ... md: sdb6 has different UUID to sdb7 md: sdb5 has different UUID to sdb7 md: sdb3 has different UUID to sdb7 md: sdb2 has different UUID to sdb7 md: sdb1 has different UUID to sdb7 md: adding sda7 ... md: sda6 has different UUID to sdb7 md: sda5 has different UUID to sdb7 m...

Hi all, I am using a single volume across two devices sdb7 and sda1, initially created on sdb7, and added sda1 using btrfs-vol later. The fstab entry: /dev/disk/by-id/scsi-SATA_ST31000333AS_9TE12DSC-part7 /mnt/btrfs btrfs defaults 1 2 Now after boot I get: ---- device fsid c4822885057410c-d2d65a83c2f15fb4 devid 1 transid 73034 /dev/sdb7 btrfs: failed t...

Hi everyone, I made a utility tool for dm-ioband version 0.0.4, named iobandctl. It enables you to easily apply I/O bandwidth control to an entire disk, and manage it. It helps you set the percentage of bandwidth to give each partition, and each user, process, group, or cgroup. (You are not able to use cgroup support yet, because the dm-ioband patch to enable cgroup support

Hi everyone, I made a utility tool for dm-ioband version 0.0.4, named iobandctl. It enables you to easily apply I/O bandwidth control to an entire disk, and manage it. It helps you set the percentage of bandwidth to give each partition, and each user, process, group, or cgroup. (You are not able to use cgroup support yet, because the dm-ioband patch to enable cgroup support

Hi everyone, I made a utility tool for dm-ioband version 0.0.4, named iobandctl. It enables you to easily apply I/O bandwidth control to an entire disk, and manage it. It helps you set the percentage of bandwidth to give each partition, and each user, process, group, or cgroup. (You are not able to use cgroup support yet, because the dm-ioband patch to enable cgroup support

Hi all, Apologies but this is going to be a long post. I get a corruption sometime when I do a $sudo shutdown -r now This is on an ubuntu 8.10 machine. The only way to resolve the same I know is to do a sudo fsck -y /dev/sdb7 This is the output I got when I ran fsck through the Live CD $ sudo fsck -y /dev/sdb7 fsck 1.41.3 (12-Oct-2008) e2fsck 1.41.3 (12-Oct-2008) /dev/sdb7 contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Inode 991290 has illegal block(s). Clear? yes Illega...

...n't understand, when partitions are created, why does Linux number it awkwardly? For example, I created 1 Primary partition of 10% disk, then created 1 Extended partition of 90% disk. Inside that extended partition, I created 3 logical partitions 33% each. It went numbering sdb1, sdb5, sdb6 and sdb7. Where's the hell 2,3 and 4? Anyways, I've got my partitions now and formatted them so, it's all good. Thanks for your help with this. Next, as I went through Bacula's pages, I found that they mostly use tape drives for backup....ugh.......how can I use my usb partitions with Bacul...

Hello, recently I installed a distribution I want to look at via chroot into a btrfs subvolume on a multidevice btrfs. Now I tried to boot this, the kernel command line in GRUB looks as follows so far: /kernel-2.6.29-rc7-git3 root=/dev/sdb7 rootfstype=btrfs rootflags=device=/dev/sda1,subvol=archroot This gives "VFS: cannot find sdb7 or bad block", like it would when trying to mount via fstab without -o device=foo The fstab line for / looks like: /dev/sdb7 / btrfs device=/dev/sda1,subvol=archroot 1 1 Is this possible a...

...a hard disk, and each time it failed after installing all the rpms, with the warning "The installation has tried to mount image #2, but cannot find it on the hard drive." When I pressed the Debug button one time after the failure, it seemed to say that it was looking for the file in /dev/sdb7//ext2/ (/dev/sdb7 being the site of the DVD ISO). But I'm not sure what "image #2" is? Or where it should be put? Incidentally, I started by copying isolinux/vmlinuz and isolinux/initrd.img to the the directory CentOS-5.6 in the /boot parition of a working linux (Fedora) system, and...

...s error (device sd(8,6)): ext3_readdir: directory #3473659 contains a hole at offset 1852399616 $ mount /dev/sdb6 on / type auto (rw) none on /proc type proc (rw) /dev/sdb5 on /boot type ext3 (rw) /dev/sda6 on /home type ext3 (rw,nosuid,noatime) /dev/sdb8 on /tmp type ext3 (rw,nosuid,nocheck) /dev/sdb7 on /var type ext3 (rw,nosuid,noatime) /dev/sdb9 on /extra type ext3 (rw,noatime,data=journal,nocheck) /dev/hda6 on /mnt/hda type ext3 (rw,nosuid,noatime,nocheck) none on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sdc6 on /copymail type ext3 (rw,nosuid,noatime,data=writeback,nocheck) -- Ralf Hi...

....x86_64 e2fsprogs-libs-1.41.4-12.fc11.i586 e2fsprogs-devel-1.41.4-12.fc11.x86_64 e2fsprogs-debuginfo-1.41.4-12.fc11.x86_64 mount: /dev/sdb8 on /srv/multimedia type ext3 (rw,relatime) $ df -hT Filesystem Type Size Used Avail Use% Mounted on /dev/sdb2 ext3 30G 1.1G 28G 4% / /dev/sdb7 ext3 20G 1.3G 18G 7% /var /dev/sdb6 ext3 30G 12G 17G 43% /usr /dev/sdb5 ext3 40G 25G 13G 67% /home /dev/sdb1 ext3 107M 52M 50M 52% /boot */dev/sdb8 ext3 111G 79G 27G 76% /srv/multimedia* tmpfs tmpfs 2.9G 35M 2.9G 2% /dev/...

Hi, I'm setting up ocfs on opensuse 10.3 with kernel 2.6.22.5-31 . Appreciate if you could guide on the solution to this error. I have a secondary hard disk (80G) created raw paritions primary /dev/sdb1 - 12G extended /dev/sdb2 - 12G comprising of /dev/sdb5 - 4G /dev/sdb6 - 3G /dev/sdb7 - 5G The error is as follows: Could not get a raw device slot for disk access. Please free up some devices. Error: Error opening /dev/rawctl No such file or directory, bindraw.c 63 Since there was mention of /dev/rawctl, i tried the following too: # mkdir /dev/raw cd /dev/raw mknod raw5 c 162 5...

...t;> it's OK] md1 : active raid1 sdb3[1] sda3[0] 4192896 blocks [2/2] [UU] [-->> it's OK] md2 : active raid1 sda5[0] sdb5[1] 4192832 blocks [2/2] [UU] [-->> it's OK] md3 : active raid1 sdb6[1] sda6[0] 4192832 blocks [2/2] [UU] [-->> it's OK] md4 : active raid1 sdb7[1] sda7[0] 4192832 blocks [2/2] [UU] [-->> it's OK] md5 : active raid0 sdb8[1] sda8[0] 8385536 blocks 256k chunks [-->>>>>> What's the meaning of this? Is it an error on the hdds? What can I do to fix this?] Thanks in advance. regards, Israel

We can reproduce this oops via the following steps: $ mkfs.btrfs /dev/sdb7 $ mount /dev/sdb7 /mnt/btrfs $ for ((i=0; i<3; i++)); do btrfs sub snap /mnt/btrfs /mnt/btrfs/s_$i; done $ rm -fr /mnt/btrfs/* $ rm -fr /mnt/btrfs/* then we''ll get ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:2264! [...] Call Trace: [<ffffffffa05578c7>] bt...

..., 11:50 am, wbrana@gmail.com wrote: > On Sun, Sep 20, 2009 at 3:47 AM, Daniel J Blueman > > <daniel.blueman@gmail.com> wrote: > > On Sep 19, 7:20 pm, wbr...@gmail.com wrote: > > >> RAID details: > >> > >> md8 : active raid10 sda7[0] sdd7[3] sdc7[2] sdb7[1] > >> 62925824 blocks 256K chunks 2 far-copies [4/4] [UUUU] > >> > >> Ext4: > >> mkfs.ext4 -E stride=64,stripe-width=128 /dev/md8 > >> mount -t ext4 -o noatime,auto_da_alloc,commit=600 /dev/md8 /mnt/md8 Here, stripe-width should be 4* stride, no...

...--------------- /dev/sdb10 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sdb2 on /boot type ext3 (rw) tmpfs on /dev/shm type tmpfs (rw) /dev/sdb5 on /home type ext3 (rw) /dev/sdb6 on /common type ext3 (rw) /dev/sdb7 on /BackupPC type ext3 (rw) /dev/sdb8 on /Photos type ext3 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) nfsd on /proc/fs/nfsd type nfsd (rw) ----------------------------- and here is the response to "sudo fdisk /dev/sdb&quot...

Running a heavily modified xen-unstable changset 19590:f80cf52a4fb6 with debugger_attached set, I was seeing the debug traps getting lost from the EXCEPTION_BITMAP in vmx_update_guest_cr() when transitioning from real to protected mode. In my codebase, I could fix this trivially by clearing the debug_state_latch and letting vmx_do_resume() reapply the setting. However, while it looks like a valid

We are setup new DELL 6800 server fro Informix database. We create "raw" partitions and change "raw" partitions owner to "informix:informix". After reboot owner change back to "root". we don't have problem on CENTOS 3.X, but this problem happen on CENTOS 4.6. I double check "SELINUX" is "disable". does anyone know why it work on

...AssignedTo: wayned@samba.org ReportedBy: faris.xiao@haoxi.com QAContact: rsync-qa@samba.org The --copy-unsafe-links option cann't take affect. when I run : [root@beijingdb mms]#/usr/local/rsync/bin/rsync --copy-unsafe-links -vzrtopgn --progress db@192.168.0.2::db /mnt/sdb7/77dbmysqldata --password-file=/usr/ local/rsync/etc/dbpass I get the following error at tail of output : wrote 1035 bytes read 35847 bytes 24588.00 bytes/sec total size is 6755588056 speedup is 183167.62 rsync warning: some files vanished before they could be transfered (code 24) at main.c(10...

We are set up CENTOS 5.2 (X86) as our database server.? I created raw partitions and also put definition on /etc/sysconfig/rawdevices. I can use "raw -qa" see raw partitions.? The wield things is after reboot /dev/raw is not exist any more. ? Does anyone know how to fix it? ? Thanks.