search for: sdb4

...m14 RW /dev/ram14: block size is 1024 bytes /dev/ram14: No label detected Closed /dev/ram14 /dev/ram15: Not using O_DIRECT Opened /dev/ram15 RW /dev/ram15: block size is 1024 bytes /dev/ram15: No label detected Closed /dev/ram15 Opened /dev/sdb4 RW O_DIRECT /dev/sdb4: block size is 512 bytes /dev/sdb4: lvm2 label detected lvmcache: /dev/sdb4: now orphaned /dev/sdb4: Found metadata at 4608 size 1715 for vg1 (rthUcY-KiTw-zqwY-Wgg7-rG54-wTmZ-UYY6zA) lvmcache: /dev/sdb4: now in VG vg1 (rthUcYKiTwzqwYWgg7rG54wTm...

...My os is: $ cat /etc/redhat-release CentOS Linux release 7.1.1503 (Core) $ uname -r 3.10.0-229.14.1.el7.x86_64 $ rpm -qa | grep -i lvm lvm2-libs-2.02.115-3.el7_1.1.x86_64 lvm2-2.02.115-3.el7_1.1.x86_64 And the solution proposed in above examples does not work on it. After (lv xxx is only on /dev/sdb4 before): # lvconvert --mirrors 1 --stripes 4 /dev/cinder-volumes/xxx /dev/sda4 /dev/sdc4 /dev/sdd4 /dev/sdf4 I am getting in "lvdisplay -m": --- Logical volume --- LV Path /dev/cinder-volumes/xxx LV Name xxx VG Name cinder-volumes LV...

...dev/md2 97G 918M 91G 1% / tmpfs 16G 0 16G 0% /dev/shm /dev/md1 485M 54M 407M 12% /boot /dev/md3 3.4T 198M 3.2T 1% /vz Personalities : [raid1] md1 : active raid1 sda1[0] sdb1[1] 511936 blocks super 1.0 [2/2] [UU] md3 : active raid1 sda4[0] sdb4[1] 3672901440 blocks super 1.1 [2/2] [UU] bitmap: 0/28 pages [0KB], 65536KB chunk md2 : active raid1 sdb3[1] sda3[0] 102334336 blocks super 1.1 [2/2] [UU] bitmap: 0/1 pages [0KB], 65536KB chunk md0 : active raid1 sdb2[1] sda2[0] 131006336 blocks super 1.1 [2/2] [UU] M...

Hi, Recently, I made a btrfs to use. And I met slowness problem. Trying to diag it. I found this: 1. dd if=/dev/zero of=test count=1024 bs=1MB This is fast, at about 25MB/s, and reasonable iowait. 2. dd if=/dev/zero of=test count=1 bs=1GB This is pretty slow, at about 1.5MB/s, and 90%+ iowait, constantly. May I know why it works like this? Thanks. -- To unsubscribe from this list: send the

Hello, I added a new disk into our RAID5 array, it looks like this: md2 : active raid5 sdd4[3] sde4[4] sda4[0] sdc4[2] sdb4[1] 3767274240 blocks level 5, 64k chunk, algorithm 2 [5/5] [UUUUU] # btrfs fi sh Label: none uuid: 5534d2e7-be31-49c7-8ab7-90c5ab8afe18 Total devices 1 FS bytes used 2.24TB devid 3 size 2.63TB used 2.63TB path /dev/md2 # mount ... /dev/md2 on /home type btrfs (rw,noatime,compress) #...

...ed the server in rescue mode, and created the partional table, and added all the partitions to the software raid. *I have added the partitions to the RAID, and reboot.* # mdadm /dev/md0 --add /dev/sdb1 # mdadm /dev/md1 --add /dev/sdb2 # mdadm /dev/md2 --add /dev/sdb3 # mdadm /dev/md3 --add /dev/sdb4 *After reboot, server did not boot. So I do the followings:* # mount /dev/md1 /mnt/rescue # mount /dev/md0 /mnt/rescue/boot # mount -o bind /dev /mnt/rescue/dev # mount -o bind /proc /mnt/rescue/proc # mount -o bind /dev/shm /mnt/rescue/dev/shm # mount -o bind /sys /mnt/rescue/sys # chroot /mnt...

...RKGROUP netbios name = DSLKAYAK hosts allow = 192.168.1.* security = share client ntlmv2 auth = no load printers = yes printing = cups printcap name = cups [later set to printcap name = /usr/local/etc/cups/printcap] [share] path = /mnt/sdb4/dslshare read only = no browseable = yes guest ok = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes public = yes guest ok = yes writable = no printable = yes [print$] comment = Pri...

...c-..." TYPE="crypto_LUKS" vg_internal_e /dev/md3: UUID="1Fi2Ex-..." TYPE="LVM2_member" /dev/sda4: UUID="00029bd4-..." UUID_SUB="d0024074-..." LABEL="e.ld:3" TYPE="linux_raid_member" /dev/sdb4: UUID="00029bd4-..." UUID_SUB="bf98fc79-..." LABEL="e.ld:3" TYPE="linux_raid_member" beside blkid any other tool available? -- Thanks, LF

...far as it goes). Device Boot Start End Sectors Size Id Type /dev/sdb1 * 2048 2042239 2040192 996.2M ef EFI (FAT-12/16/32) /dev/sdb2 2042240 3070399 1028160 502M 82 Linux swap / Solaris /dev/sdb3 3072000 244244479 241172480 115G 83 Linux /dev/sdb4 244244480 499196591 254952112 121.6G 7 HPFS/NTFS/exFAT The BLFS system (on sdb3) used to be booted from a Win7 (sdb4), no longer active now (hence the current attempts at booting through syslinux). First sector of sdb3 (with "legacy", 0.97, GRUB STAGE2 used to be copied to Windows...

...253319 e4 SpeedStor Partition 1 does not end on cylinder boundary. /dev/sdb2 ? 62656 186401 993984023 98 Unknown Partition 2 does not end on cylinder boundary. /dev/sdb3 ? 105611 225119 959953209 7d Unknown Partition 3 does not end on cylinder boundary. /dev/sdb4 ? 347 865 4161536 0 Empty Partition 4 does not end on cylinder boundary. Partition table entries are not in disk order ----------------------------- Does fdisk not like large disks? -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-28423...

...007 cylinders Units = cylinders of 4154 * 512 bytes Device Flag Start End Blocks Id System /dev/sdb1 0 31 64387 83 Linux native /dev/sdb2 u 31 157 261702 82 Linux swap /dev/sdb3 0 1007 2091539 5 Whole disk /dev/sdb4 157 1007 1765450 83 Linux native Disk /dev/sdc (Sun disk label): 133 heads, 62 sectors, 1018 cylinders Units = cylinders of 8246 * 512 bytes Device Flag Start End Blocks Id System /dev/sdc1 0 1018 4197214 83 Linux native /dev/sdc3...

...4 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 0+ 21927 21928- 176136628+ 7 HPFS/NTFS /dev/sdb2 * 21928 21950 23 184747+ 83 Linux (ext2) /dev/sdb3 21951 30514 8564 68790330 83 Linux (ext3) /dev/sdb4 0 - 0 0 0 Empty Disk /dev/sda: 7297 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sda1 * 0+ 2330 2331- 187237...

Hi, I sent an email to Mark Fisheh of Oracle Corp. & posted this issue at OTN under Linux thread this morning. I hope that someone among you might have experienced this and can help. On that basis, I am sending this to you too. I am stuck & will really appreciate if you can shed some light on this. Thanks. Anjan

Hello. A couple of years ago I installed two file-servers using kickstart. The server has two 1TB sata disks with two software raid1 partitions as follows: # cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sdb4[1] sda4[0] 933448704 blocks [2/2] [UU] md0 : active raid1 sdb1[1] sda2[2](F) 40957568 blocks [2/1] [_U] Now the drives are starting to be failing and next week I'll backup /homes, reinstall OS with kickstart, and finally restore /homes. There's a problem with how the kickst...

...tialized (async) [ 128.514820] device-mapper: uevent: version 1.0.3 [ 128.518186] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel at redhat.com [ 144.869445] e1000e 0000:00:1f.6 eth0: NIC Link is Down [ 172.851384] BTRFS: device label btrfs_pool4 devid 1 transid 78270 /dev/sdb4 scanned by btrfs (1293) [ 172.851648] BTRFS: device label btrfs_pool3 devid 1 transid 27410 /dev/sda5 scanned by btrfs (1293) [ 172.852030] BTRFS: device fsid de9694f8-9c0d-4e9d-bd12-57adc4381cd7 devid 1 transid 41 /dev/sda3 scanned by btrfs (1293) [ 172.852224] BTRFS: device fsid 23e1398d-e462-...

...; [ 128.514820] device-mapper: uevent: version 1.0.3 > [ 128.518186] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel at redhat.com > [ 144.869445] e1000e 0000:00:1f.6 eth0: NIC Link is Down > [ 172.851384] BTRFS: device label btrfs_pool4 devid 1 transid 78270 /dev/sdb4 scanned by btrfs (1293) > [ 172.851648] BTRFS: device label btrfs_pool3 devid 1 transid 27410 /dev/sda5 scanned by btrfs (1293) > [ 172.852030] BTRFS: device fsid de9694f8-9c0d-4e9d-bd12-57adc4381cd7 devid 1 transid 41 /dev/sda3 scanned by btrfs (1293) > [ 172.852224] BTRFS: device fsid...

Hello, I cannot boot with GRUB and SYSLINUX from a logical partition on my USB drive. Here is the test setup: - 4GB Flash drive with the following partitions: sdb1 Primary fat32 ~ 800MB sdb2 Primary fat32 ~ 800MB sbd3 Primary fat32 ~ 800MB sdb4 Extended partition sdb5 Logical partition ~ 800MB sdb6 Logical partition ~ 600MB - Grub files were copied to /dev/sdb1/boot/grub (Stage files, etc.) - Grub was installed in the MBR of the USB flash drive. - Damn Small Linux (DSL) was downloaded an unzipped to the root of sdb5 (zip-file dsl-...

...Here''s the difference between the good and bad files: diff newcentos44 centos44 5c5 < disk = [ ''phy:/dev/hda2,sdb1,w'',''phy:/dev/VolGroup08/LogVol01,sdb2,w'',''phy:/dev/VolGroup08/LogVol02,sdb3,w'',''phy:/dev/VolGroup09/VarRoot,sdb4,w''] --- > disk = [ ''phy:/dev/hda2,sdb1,w'',''phy:/dev/VolGroup08/LogVol01,sdb2,w'',''phy:/dev/VolGroup08/LogVol02,sdb3,w''] /dev/VolGroup09/VarRoot exists, is an empty ext3 partition and e2fsck says it''s clean. Kernel: Lin...

Hello, why don't work the Timeout funktion in PXE Boot v1.7.2 of Syslinux?? here the config file: default linux timeout 1000 label linux kernel kernel_bart append initrd=initrd.img root=/dev/sdb4 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.zytor.com/pipermail/syslinux/attachments/20020430/dded961c/attachment.html>

...of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 8 64228+ b W95 FAT32 /dev/sdb2 9 16 64260 b W95 FAT32 /dev/sdb3 17 81 522112+ b W95 FAT32 /dev/sdb4 82 7295 57946455 f W95 Ext'd (LBA) /dev/sdb5 82 114 265041 b W95 FAT32 The three primary partitions boot successfully, but when attempting to boot from the logical partition I receive the following error: "Requested logical partiti...