search for: sda4

SAMSUNG SSD 830 Series CPU0: Intel® Core(TM) i7-2820QM CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07) 8GB RAM (quite heavily tested, not recently, with several days of memtest) kernel 3.11.1-200.fc19.x86_64 running on baremetal btrfs-progs-0.20.rc1.20130308git704a08c-1.fc19.x86_64 Today I did a scrub on a btrfs volume, with no message or errors in console or dmesg or journal. Immediately after

...-3 RW O_DIRECT /dev/dm-3: block size is 4096 bytes /dev/dm-3: No label detected Closed /dev/dm-3 /dev/ram4: Not using O_DIRECT Opened /dev/ram4 RW /dev/ram4: block size is 1024 bytes /dev/ram4: No label detected Closed /dev/ram4 Opened /dev/sda4 RW O_DIRECT /dev/sda4: block size is 512 bytes /dev/sda4: lvm2 label detected lvmcache: /dev/sda4: now orphaned /dev/sda4: Found metadata at 18432 size 1715 for vg1 (rthUcY-KiTw-zqwY-Wgg7-rG54-wTmZ-UYY6zA) lvmcache: /dev/sda4: now in VG vg1 lvmcache: /dev/sda...

...still an impossibility? From everything I've found, it seems to be something that is not possible at the moment. I was just wondering if that has changed or if there are plans to change that? Here is the issue I'm experiencing: ~# guestmount --rw -a ${disk_path}/${disk_name} -m /dev/sda4 /tmp/freebsd-master libguestfs: error: mount_options: /dev/vda4 on /: mount: wrong fs type, bad option, bad superblock on /dev/vda4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so guestmount: '/...

...uted by openSuSE. Interestingly enough the current version syslinux-3.61-pre2, spares my hard disk, but still seems to live under the impression it is the USB stick. The setup is as follows: Hard disk /dev/sda with 4 partitions /dev/sda1 Windows XP /dev/sda2 Windows XP /dev/sda3 Linux Swap /dev/sda4 openSuSE root The USB stick is /dev/sdb with two partitions /dev/sdb1 /dev/sdb2 issuing extlinux -i /media/disk ( the mount point for /dev/sdb1 according to openSuSE ) results in: ./extlinux -i /media/disk /media/disk is device /dev/sda4 ./extlinux: path /media/disk doesn't match device /de...

hi All, There is a distributed cluster with 5 bricks: gl0 Filesystem Size Used Avail Use% Mounted on /dev/sda4 5.5T 4.1T 1.5T 75% /mnt/brick1 gl1 Filesystem Size Used Avail Use% Mounted on /dev/sda4 5.5T 4.3T 1.3T 78% /mnt/brick1 gl2 Filesystem Size Used Avail Use% Mounted on /dev/sda4 5.5T 4.1T 1.4T 76% /mnt/brick1 gl3 Filesystem Size Used Avail Use% Mounted on...

.... or /media.. instead of /dev/sdb.. or /dev/sdc.. ). If, for instance, /dev/sdb1 is in fact mounted to /media/disk all is fine. If the path exists and is not a mountpoint ( /dev/sd... not mounted to it ), then extlinux will set the system disk as base for the directory. ( i.e. /media/disk = /dev/sda4 in my setup ), at this point no user acknowledgment is required, but BR modified and extlinux.sys written to /media/disk. TODO: run a few tests with hpa's extlinux to verify. DONE: ./extlinux -i /media will in fact write to /dev/sda4 if /dev/sdb1 is not mounted here. Attached find a patch t...

...8064272 4529888 3124732 60% / /dev/hda3 29387900 1488316 26406744 6% /home none 127884 0 127884 0% /dev/shm /dev/sda1 33032196 30162240 1191972 97% /mnt/sda1 /dev/sda3 151195204 138014604 5500328 97% /mnt/sda3 /dev/sda4 193010776 75750204 107456104 42% /mnt/sda4 [*ROOT* mofo /mnt/sda1/mysql/fd 643 ] mv oldmail/* /mnt/sda4/mgh/oldmysqllogs/ Segmentation fault [*ROOT* mofo /mnt/sda1/mysql/fd 644 ] Message from syslogd@mofo at Thu Apr 17 21:40:13 2003 ... mofo kernel: Assertion failure in journal_stop()...

...ers of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 1275 10241406 7 HPFS/NTFS /dev/sda2 1276 2550 10241437+ 83 Linux /dev/sda3 4740 4870 1052257+ 82 Linux swap /dev/sda4 2551 3037 3911827+ 5 Extended i am able to see /dev/sda4 my new partition. when i tried to create pvcreate /dev/vg01/vol01 Device /dev/sda4 not found. i am getting evice not found error. when i tried to fdisk /dev/sda4 fdisk /dev/sda4 Unable to read /de...

...ers of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 1275 10241406 7 HPFS/NTFS /dev/sda2 1276 2550 10241437+ 83 Linux /dev/sda3 4740 4870 1052257+ 82 Linux swap /dev/sda4 2551 3037 3911827+ 5 Extended i am able to see /dev/sda4 my new partition. when i tried to create pvcreate /dev/vg01/vol01 Device /dev/sda4 not found. i am getting evice not found error. when i tried to fdisk /dev/sda4 fdisk /dev/sda4 Unable to read /de...

I didn't test this one fully yet, but I'm building Fedora 26 ppc64/le test images now. However it seems like it could be a good idea. I wonder if anyone depends on the images we supply being MBR-based? Rich.

I have a laptop that I put centos 7 on and I started out with a 30gig partition.? I resized the other part of the disk to allow more space for centos.? I then created an unformated partition in the available space,? ran pvcreate /dev/sda4 vgextend lvname /dev/sda4 lvextend -L 184.46G /dev/lvname/root but when I run: sudo resize2fs /dev/lvname/root I get: resize2fs: Bad magic number in super-block while trying to open /dev/lvname/root Couldn't find valid filesystem superblock. How do I resize the volume? Than...

How often is this the case ? ??? > If extlinux is the system bootloader, then often what you call the > system partition will be the one that should have extlinux installed on it. I think in most cases people try to make _some_other_ disk bootable. If I boot with extlinux as the bootloader why should I want to install it again ? Apart from that it would then require -u not -i. Casual On

...if that has changed or > if there are plans to change that? libguestfs just uses the Linux kernel's ufs driver. If the Linux kernel gets fixed, we get the ability automatically. > Here is the issue I'm experiencing: > > ~# guestmount --rw -a ${disk_path}/${disk_name} -m /dev/sda4 > /tmp/freebsd-master > libguestfs: error: mount_options: /dev/vda4 on /: mount: wrong fs > type, bad option, bad superblock on /dev/vda4, > missing codepage or helper program, or other error > In some cases useful info is found in syslog - try > dmesg | tail...

...at on the boot process. What I'm trying to achieve is to boot from an external USB HDD (not flash drive) using EXTLINUX. I've run an installation against the disk using a VM. The disk was partitioned as follows: /dev/sda1 = /boot (bootable) /dev/sda2 =/swap /dev/sda3=/ (i.e. root) /dev/sda4=/dos sda1 and 3 are formatted as EXT3 .. sda4 is FAT32. As far as I can see, I've followed the instructions correctly and initialised extlinux against the /boot/extlinux directory I've created. MBR has been copied to /dev/sda extlinux.conf has been created and I know that it's being...

...me -r 3.10.0-229.14.1.el7.x86_64 $ rpm -qa | grep -i lvm lvm2-libs-2.02.115-3.el7_1.1.x86_64 lvm2-2.02.115-3.el7_1.1.x86_64 And the solution proposed in above examples does not work on it. After (lv xxx is only on /dev/sdb4 before): # lvconvert --mirrors 1 --stripes 4 /dev/cinder-volumes/xxx /dev/sda4 /dev/sdc4 /dev/sdd4 /dev/sdf4 I am getting in "lvdisplay -m": --- Logical volume --- LV Path /dev/cinder-volumes/xxx LV Name xxx VG Name cinder-volumes LV UUID AKjKAo-66cv-Ygc2-4Ykq-sSJQ-RJOY-mfjoMD LV Write Access...

...1 root root 435 Jan 3 16:01 set_if.sh -rwxr-xr-x 1 root root 97 Jan 3 16:01 shtest.sh -rwxr-xr-x 1 root root 468 Jan 3 16:01 syslog_chg.sh -rwxr-xr-x 1 root root 46 Jan 3 16:01 testtest.sh root at CPU_N:/fm/bbb> df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda4 6594680 150216 6444464 3% /fm root at CPU_N:/fm/bbb> cp set_if.sh set_if.cpy root at CPU_N:/fm/bbb> sync root at CPU_N:/fm/bbb> df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda4 6594680 150216 6444464 3% /fm root...

...8064272 4529888 3124732 60% / /dev/hda3 29387900 1488316 26406744 6% /home none 127884 0 127884 0% /dev/shm /dev/sda1 33032196 30162240 1191972 97% /mnt/sda1 /dev/sda3 151195204 138014604 5500328 97% /mnt/sda3 /dev/sda4 193010776 75750204 107456104 42% /mnt/sda4 [*ROOT* mofo /mnt/sda1/mysql/fd 643 ] mv oldmail/* /mnt/sda4/mgh/oldmysqllogs/ Segmentation fault [*ROOT* mofo /mnt/sda1/mysql/fd 644 ] Message from syslogd@mofo at Thu Apr 17 21:40:13 2003 ... mofo kernel: Assertion failure in journal_stop()...

...actual linux kernel and initrd are specified as modules. A working grub configuration looks something like: ================================================== title measured 2.6.28.9-itpm-dirty root (hd0,3) kernel /boot/tboot.gz logging=vga,serial module /boot/vmlinuz-2.6.28.9-itpm-dirty root=/dev/sda4 ro intel_iommu=on earlyprintk=vga console=ttyS0,115200 module /boot/initrd.img-2.6.28.9-itpm-dirty module /boot/GM45_PM45_SINIT_19.BIN ================================================== I tried replicating this with a extlinux config file. ================================================== LABEL...

...current checkout, creating a new FS and running iozone [1] on it results in an oops [2]. remove_suid is called, accessing offset 14 of a NULL pointer. Let me know if you''d like me to test any fix, do further debugging or get more information. Thanks, Daniel --- [1] # mkfs.btrfs /dev/sda4 # mount /dev/sda4 /mnt /mnt# iozone -a . --- [2] [ 899.118926] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 899.118938] printing eip: c016d3f1 *pde = 00000000 [ 899.118946] Oops: 0000 [#1] SMP [ 899.118952] Modules linked in: btrfs libcrc32c sonypi ppdev...

...008000 std menu separator label LFS10 menu label Windows 10 kernel chain.c32 append hd1 1 menu separator label LFSxp menu label Windows XP kernel chain.c32 append hd0 2 menu separator label LFSmain menu label Linux-4.10.8 linux /vmlinuz-4.10.8 append ro root=/dev/sda4 radeon.modeset=1 iommu=pt iommu=1 radeon.dpm=1 drm_kms_helper.edid_firmware=edid/1600x1200.bin menu separator label LFSaux menu label Recovery linux /vmlinuz-4.10.6 append ro root=/dev/sda4 radeon.modeset=1 iommu=pt iommu=1 radeon.dpm=1 drm_kms_helper.edid_firmware=edid/1600x1200.bin me...