search for: sda13

...ts and other related information are available through this site. Please check it out: http://people.valinux.co.jp/~ryov/dm-ioband/ Bandwidth control on a per partition basis ========================================== Test procedure -------------- o Prepare three partitions sda11, sda12 and sda13. o Create three ioband devices ioband1, ioband2 and ioband3 on each partition respectively. o Give weights of 40, 20 and 10 to each ioband device respectively. o Run 50, 100 and 200 processes issuing random read/write direct I/O with 4KB data on each ioband device at the same time res...

...ts and other related information are available through this site. Please check it out: http://people.valinux.co.jp/~ryov/dm-ioband/ Bandwidth control on a per partition basis ========================================== Test procedure -------------- o Prepare three partitions sda11, sda12 and sda13. o Create three ioband devices ioband1, ioband2 and ioband3 on each partition respectively. o Give weights of 40, 20 and 10 to each ioband device respectively. o Run 50, 100 and 200 processes issuing random read/write direct I/O with 4KB data on each ioband device at the same time res...

...ts and other related information are available through this site. Please check it out: http://people.valinux.co.jp/~ryov/dm-ioband/ Bandwidth control on a per partition basis ========================================== Test procedure -------------- o Prepare three partitions sda11, sda12 and sda13. o Create three ioband devices ioband1, ioband2 and ioband3 on each partition respectively. o Give weights of 40, 20 and 10 to each ioband device respectively. o Run 50, 100 and 200 processes issuing random read/write direct I/O with 4KB data on each ioband device at the same time res...

...2 volume with bs=4k cs=4k and nosparse. 2. create a small file(say less than 100 bytes) and we will create the file which is allocated 1 cluster. 3. read 8196 bytes from the kernel using O_DIRECT which exceeds the limit. 4. The ocfs2 volume becomes read-only and dmesg shows: OCFS2: ERROR (device sda13): ocfs2_direct_IO_get_blocks: Inode 66010 has a hole at block 1 File system is now read-only due to the potential of on-disk corruption. Please run fsck.ocfs2 once the file system is unmounted. I have checked the code of 1.2 and copy the read check there. And actually I think even with sparse-enab...

Listee's... I have a 5.5 box and I have formatted a partition as ext4 however I can't mount it, the mount command is telling me its an unknown file system type. fsck tells me the partition is a clean ext4 partition but I can't mount it. Some reasearch has lead me to believe the problem is that ext4 isn't enabled in the kernel by default in 5.5 (this was originally a 5.2 box that

...ation about the raid configuration of /dev/md11: raiddev /dev/md11 raid-level 0 nr-raid-disks 4 nr-spare-disks 0 chunk-size 32 persistent-superblock 1 device /dev/sda13 raid-disk 0 device /dev/sdb13 raid-disk 1 device /dev/sdc15 raid-disk 2 device /dev/sdd15 raid-disk 3 -- An...

...fd Linux raid autodetect /dev/sda9 8146 8511 2939863+ fd Linux raid autodetect /dev/sda10 8512 8574 506016 83 Linux /dev/sda11 8575 8637 506016 83 Linux /dev/sda12 8638 8700 506016 83 Linux /dev/sda13 8701 8825 1004031 83 Linux /dev/sda14 8826 8888 506016 83 Linux /dev/sda15 8889 9013 1004031 83 Linux /dev/sda16 9014 9726 5727141 83 Linux sda10-16 i swap partitions. Partition table sdb: Disk /dev/sd...