Displaying 20 results from an estimated 28 matches for "scsi7".
Did you mean:
scsi
2007 Feb 15
1
Can't mount USB drives
Fresh install of CentOS 4.4. uname -a, lspci, & lsusb output at bottom.
I insert my 256MB USB key, light goes on, then off. Never mounts. Here's
the end of dmesg:
usb 1-1: new full speed USB device using address 11
scsi7 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: STORAGE DEVICE Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 02 00 00 00
sda: assuming driv...
2009 Apr 28
1
USB device not connected (CentOS 5.3)
...zapple.com> wrote:
> On Tue, 2009-04-28 at 09:48 -0700, Bart Schaefer wrote:
>> I recently purchased an I/O Magic USB enclosure for 3.5" IDE
> ----
> check what it says about the drive in dmesg after you plugged it in.
Hmm.
usb 1-6: new high speed USB device using address 4
scsi7 : SCSI emulation for USB Mass Storage devices
?Vendor: HDS72251 ?Model: 6VLAT80 ? ? ? ? ? Rev: ?0 0
?Type: ? Direct-Access ? ? ? ? ? ? ? ? ? ? ?ANSI SCSI revision: 02
SCSI device sdd: 321672960 512-byte hdwr sectors (164697 MB)
sdd: assuming drive cache: write through
SCSI device sdd: 321672960 512...
2006 Feb 20
0
aspi error ASPI_ExecScsiCmd in Wine
...5 23:19:31 localhost kernel: Attached scsi generic sg0 at scsi6, channel 0, id 0, lun 0, type 0
Feb 15 23:19:59 localhost kernel: usb 1-2: USB disconnect, address 8
Feb 15 23:20:02 localhost kernel: usb 1-2: new full speed USB device using uhci_hcd and address 9
Feb 15 23:20:02 localhost kernel: scsi7 : SCSI emulation for USB Mass Storage devices
Feb 15 23:20:07 localhost kernel: Vendor: Y-E DATA Model: USB-FDU Rev: 7.03
Feb 15 23:20:07 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00
Feb 15 23:20:11 localhost kernel: sda: Unit Not Ready, sense:
Feb 15 23:20:11 localhost kernel:...
2013 Aug 12
6
3TB External USB Drive isn't recognized
...eem to show up as a /dev/ device. I supplied the dmesg output
I see when I plug in the device. Is this a limitation of CentOS5? Do I need
some additional package / driver / update?
usb 2-1.2: new high speed USB device using ehci_hcd and address 5 usb
2-1.2: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB
Mass Storage devices usb-storage: device found at 5 usb-storage: waiting
for device to settle before scanning Vendor: ASMT Model: 2105
Rev: 0 Type: Direct-Access ANSI SCSI revision:
06 sde : very big device. try to use READ CAPAC...
2015 May 25
2
fsck failing to notice that the block device was pulled out from under it?
...May 25 11:39:19 hier kernel: [76241.881911] usb 4-1.1: Manufacturer: Seagate
May 25 11:39:19 hier kernel: [76241.881915] usb 4-1.1: SerialNumber:
NA4JDN4N
May 25 11:39:19 hier kernel: [76241.882652] usb-storage 4-1.1:1.0: USB
Mass Storage device detected
May 25 11:39:19 hier kernel: [76241.883007] scsi7 : usb-storage 4-1.1:1.0
May 25 11:39:20 hier kernel: [76242.907527] usb 4-1.1: USB disconnect,
device number 6
May 25 11:39:30 hier kernel: [76252.987833] usb 4-1.1: new high-speed
USB device number 7 using ehci-pci
May 25 11:39:30 hier kernel: [76253.142659] usb 4-1.1: New USB device
found, idVend...
2010 May 12
0
Xen 4.0.0 - dom0_mem differs from dom0''s memory
...ehci_hcd and address 4
usb 1-2: New USB device found, idVendor=13fe, idProduct=3600
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: USB DISK 2.0
usb 1-2: Manufacturer:
usb 1-2: SerialNumber: 07A20400461E291B
usb 1-2: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 1-2: USB disconnect, address 4
usb 1-2: new high speed USB device using ehci_hcd and address 5
hub 1-0:1.0: unable to enumerate USB device on port 2
usb 2-2: ne...
2012 Aug 10
1
virtio-scsi <-> vhost multi lun/adapter performance results with 3.6-rc0
...vhost-scsi=vhost-scsi4,event_idx=off -vhost-scsi
id=vhost-scsi5,wwpn=naa.60014053fd613910,tpgt=1 -device
virtio-scsi-pci,vhost-scsi=vhost-scsi5,event_idx=off -vhost-scsi
id=vhost-scsi6,wwpn=naa.6001405e86ec6fbc,tpgt=1 -device
virtio-scsi-pci,vhost-scsi=vhost-scsi6,event_idx=off -vhost-scsi
id=vhost-scsi7,wwpn=naa.6001405e6b23dd27,tpgt=1 -device
virtio-scsi-pci,vhost-scsi=vhost-scsi7,event_idx=off
Using the following fio base options:
[randrw]
rw=randrw
rwmixwrite=25
rwmixread=75
ioengine=libaio
direct=1
size=100G
iodepth=64
iodepth_batch=4
iodepth_batch_complete=32
numjobs=32
blocksize=4k
filena...
2012 Aug 10
1
virtio-scsi <-> vhost multi lun/adapter performance results with 3.6-rc0
...vhost-scsi=vhost-scsi4,event_idx=off -vhost-scsi
id=vhost-scsi5,wwpn=naa.60014053fd613910,tpgt=1 -device
virtio-scsi-pci,vhost-scsi=vhost-scsi5,event_idx=off -vhost-scsi
id=vhost-scsi6,wwpn=naa.6001405e86ec6fbc,tpgt=1 -device
virtio-scsi-pci,vhost-scsi=vhost-scsi6,event_idx=off -vhost-scsi
id=vhost-scsi7,wwpn=naa.6001405e6b23dd27,tpgt=1 -device
virtio-scsi-pci,vhost-scsi=vhost-scsi7,event_idx=off
Using the following fio base options:
[randrw]
rw=randrw
rwmixwrite=25
rwmixread=75
ioengine=libaio
direct=1
size=100G
iodepth=64
iodepth_batch=4
iodepth_batch_complete=32
numjobs=32
blocksize=4k
filena...
2010 May 28
3
Problems with PCI pass-through
Hello!
I'm having problems getting PCI pass-through to work.
This is on a AMD64 system, paravirtualized with xen-hypervisor-4.0-amd64
4.0.0-1~experimental.1, dom0: linux-image-2.6.32-5-xen-amd64 2.6.32-12.
From IRC, earlier today:
<tschwinge> waldi: Aren't the Debian xen domU-capable kernels supposed to
contain the PCI frontend (needed for PCI pass-through)? I'm getting:
2010 May 28
3
Problems with PCI pass-through
Hello!
I'm having problems getting PCI pass-through to work.
This is on a AMD64 system, paravirtualized with xen-hypervisor-4.0-amd64
4.0.0-1~experimental.1, dom0: linux-image-2.6.32-5-xen-amd64 2.6.32-12.
From IRC, earlier today:
<tschwinge> waldi: Aren't the Debian xen domU-capable kernels supposed to
contain the PCI frontend (needed for PCI pass-through)? I'm getting:
2009 Feb 27
8
Kernel build failure
Did a ''git pull'' a few minutes ago and tried to rebuild my kernel and
was given this error:
make
CHK include/linux/version.h
CHK include/linux/utsrelease.h
SYMLINK include/asm -> include/asm-x86
CALL scripts/checksyscalls.sh
CHK include/linux/compile.h
CC drivers/acpi/acpica/hwsleep.o
drivers/acpi/acpica/hwsleep.c: In function
2014 Mar 13
2
nouveau_fan_update: possible circular locking dependency detected
On Sun, Mar 9, 2014 at 10:51 AM, Marcin Slusarz
<marcin.slusarz at gmail.com> wrote:
> [ 326.168487] ======================================================
> [ 326.168491] [ INFO: possible circular locking dependency detected ]
> [ 326.168496] 3.13.6 #1270 Not tainted
> [ 326.168500] -------------------------------------------------------
> [ 326.168504] ldconfig/22297 is
2015 Jun 12
1
Fwd: Problem with GT218 (GeForce GT210)
....501229] scsi4 : pata_atiixp
> [ 1.501445] scsi5 : pata_atiixp
> [ 1.501573] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00
> irq 14
> [ 1.501573] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08
> irq 15
> [ 1.504907] scsi6 : ahci
> [ 1.505613] scsi7 : ahci
> [ 1.506270] ata7: SATA max UDMA/133 abar m512 at 0xfeaffc00 port
> 0xfeaffd00 irq 48
> [ 1.507196] ata8: SATA max UDMA/133 abar m512 at 0xfeaffc00 port
> 0xfeaffd80 irq 48
> [ 1.529416] systemd-udevd[147]: renamed network interface eth1 to p10p1
> [ 1.545433]...
2013 Aug 22
23
Question: How can I recover this partition? (unable to find logical $hugenum len 4096)
...HCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[ 5.361334] ahci 0000:00:04.0: flags: ncq only
[ 5.361358] ahci 0000:00:04.0: setting latency timer to 64
[ 5.362855] scsi3 : ahci
[ 5.363157] scsi4 : ahci
[ 5.363322] scsi5 : ahci
[ 5.363557] scsi6 : ahci
[ 5.363764] scsi7 : ahci
[ 5.363930] scsi8 : ahci
[ 5.364037] ata3: SATA max UDMA/133 abar m4096@0xfebf4000 port 0xfebf4100 irq 45
[ 5.364048] ata4: SATA max UDMA/133 abar m4096@0xfebf4000 port 0xfebf4180 irq 45
[ 5.364058] ata5: SATA max UDMA/133 abar m4096@0xfebf4000 port 0xfebf4200 irq 45
[ 5.36406...
2012 Oct 23
0
IO error after s2ram resume; device stays open
...I/MSI-X
[ 0.591574] ahci: SSS flag set, parallel bus scan disabled
[ 0.591627] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 2 ports 6
Gbps 0x3 impl SATA mode
[ 0.591629] ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo
pmp pio slum part ccc sxs
[ 0.591775] scsi6 : ahci
[ 0.591808] scsi7 : ahci
[ 0.591826] ata7: SATA max UDMA/133 abar m512@0xf7c00000 port
0xf7c00100 irq 44
[ 0.591829] ata8: SATA max UDMA/133 abar m512@0xf7c00000 port
0xf7c00180 irq 44
[ 0.591869] libphy: Fixed MDIO Bus: probed
[ 0.591903] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller (E...
2016 Jul 06
2
Help with nouveau driver
...32 slots 2 ports 6 Gbps 0x3 impl SATA mode
> Jul 4 18:11:15 localhost kernel: [ 0.914672] ahci 0000:03:00.0:
> flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
> Jul 4 18:11:15 localhost kernel: [ 0.914873] scsi6 : ahci
> Jul 4 18:11:15 localhost kernel: [ 0.914938] scsi7 : ahci
> Jul 4 18:11:15 localhost kernel: [ 0.914965] ata7: SATA max UDMA/133
> abar m512 at 0xef200000 port 0xef200100 irq 44
> Jul 4 18:11:15 localhost kernel: [ 0.914967] ata8: SATA max UDMA/133
> abar m512 at 0xef200000 port 0xef200180 irq 44
> Jul 4 18:11:15 localhost k...
2016 Jul 05
2
Help with nouveau driver
Hi, I am having problems with the nouveau driver from Debian.
Can I get help here?
Cheers
2015 Jun 11
3
Fwd: Problem with GT218 (GeForce GT210)
...lo pmp
pio slum part ccc sxs
[ 1.501229] scsi4 : pata_atiixp
[ 1.501445] scsi5 : pata_atiixp
[ 1.501573] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq
14
[ 1.501573] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq
15
[ 1.504907] scsi6 : ahci
[ 1.505613] scsi7 : ahci
[ 1.506270] ata7: SATA max UDMA/133 abar m512 at 0xfeaffc00 port 0xfeaffd00
irq 48
[ 1.507196] ata8: SATA max UDMA/133 abar m512 at 0xfeaffc00 port 0xfeaffd80
irq 48
[ 1.529416] systemd-udevd[147]: renamed network interface eth1 to p10p1
[ 1.545433] systemd-udevd[152]: renamed ne...
2016 Jul 06
0
Help with nouveau driver
...00.0: AHCI
0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Jul 4 18:11:15 localhost kernel: [ 0.914672] ahci 0000:03:00.0:
flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
Jul 4 18:11:15 localhost kernel: [ 0.914873] scsi6 : ahci
Jul 4 18:11:15 localhost kernel: [ 0.914938] scsi7 : ahci
Jul 4 18:11:15 localhost kernel: [ 0.914965] ata7: SATA max UDMA/133
abar m512 at 0xef200000 port 0xef200100 irq 44
Jul 4 18:11:15 localhost kernel: [ 0.914967] ata8: SATA max UDMA/133
abar m512 at 0xef200000 port 0xef200180 irq 44
Jul 4 18:11:15 localhost kernel: [ 0.915051] ahc...
2016 Jul 07
0
Help with nouveau driver
...s 6 Gbps 0x3 impl SATA mode
>> Jul 4 18:11:15 localhost kernel: [ 0.914672] ahci 0000:03:00.0:
>> flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
>> Jul 4 18:11:15 localhost kernel: [ 0.914873] scsi6 : ahci
>> Jul 4 18:11:15 localhost kernel: [ 0.914938] scsi7 : ahci
>> Jul 4 18:11:15 localhost kernel: [ 0.914965] ata7: SATA max UDMA/133
>> abar m512 at 0xef200000 port 0xef200100 irq 44
>> Jul 4 18:11:15 localhost kernel: [ 0.914967] ata8: SATA max UDMA/133
>> abar m512 at 0xef200000 port 0xef200180 irq 44
>> Jul 4...