search for: scobie

I am somewhat unsure as to the definition of "Distinctive Ring". What I am trying to achieve is to have Zap connected phones (TDM400P) ring with different cadences depending on whether the call is incoming on the PSTN context or an IAX2 context. Googling, I find this from Mark: I've added distinctive ring support to Asterisk now (also I've added answer confirmation which is

I have been running a Smart-UPS RT 3000 VA using nut successfully over the 940-0095B cable for a couple of years. I have just received a second unit, but it is slightly different in 3 ways that I have found so far. 1. It's a Smart-UPS RT 3000 XL 2. The 940-0095B cable now uses an RJ45 connector at the UPS end. 3. It now requires a baud rate of 9600 instead of the 2400 used previously.

Im a 3-days-asterisk-newbie. In 3 weeks, I must have a PBX installed in a new office of ours: Panasonic or Asterisk. Asterisk would be, if I can emulate some Panasonic functions on Asterisk fast, to convince the executives. What I have done until now: Bought 1 Linksys pap2 (2 FXS), 1 Linksys SPA3102 (1 FXS + 1 FXO) for making asterisk tests. Configured Asterisk/Fedora 9 so I can make SIP->PSTN

Knowing very little about Basic Rate ISDN and having spent the last couple of hours educating myself, I thought I would seek some more informed comment. Please go easy if this is blindingly obvious :) I have a ZyXEL Prestige 100 ISDN Router, a stand alone relic from when we used to access the Net via ISDN. It has an ISDN BRI input, a 10BaseT ethernet connector, an RS232 connector for

I've installed a TDM04B and a TDM40B. I haven't plugged any lines into them yet but I'm starting to see this in my logs... [root@webster asterisk]# grep alarm /var/log/messages Sep 20 09:13:22 webster kernel: Power alarm on module 1, resetting! Sep 22 11:07:07 webster kernel: Power alarm on module 1, resetting! Sep 22 16:10:55 webster kernel: Power alarm on module 1, resetting! Sep

When starting *, I get the following when the chan_iax2.so loads: [chan_iax2.so] => (Inter Asterisk eXchange (Ver 2)) == Manager registered action IAXpeers == Parsing '/etc/asterisk/iax.conf': Found WARNING[16384]: File chan_iax2.c, Line 4980 (set_config): Ignoring port for now == Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2)) == Using TOS

A call is placed via IAX2 from one asterisk to another, to a TDM400 channel whose extensions.conf entry is exten => 502,1,Dial(${COLIN}) exten => 502,2,Congestion If this channel is already busy when called, the call is instantly hungup, without the caller hearing the congestion tone. The log from the callers asterisk shows: -- Executing Dial("Zap/1-1",

Hi. I gave up with the IBM NetFinity, so I'm going to buy new hardware. I'm going to install: 1-)One X100P (1 FXO module) 2-)One TDM03B (3 FXO modules) I'll have the 4 FXO channels busy almost all the time, and I would like quality to be as good as possible without going to the high-level hardware. I would like to learn of some tested configurations (I've heard of problems

After some months of "Make updates", I have just deleted my Zaptel and Asterisk source directories and done "cvs checkout" 's of asterisk and zaptel, in order to clean up the trees. After re-installing, I am finding that when dialling into an X100P, that Answer is now answering on the second ring, where it always used to answer on the first before. In the console,

...ed on channel 7: No such device or address (6) /lib/modules/2.4.20/misc/wcfxs.o: post-install wcfxs failed /lib/modules/2.4.20/misc/wcfxs.o: insmod wcfxs failed The machine has to be restarted to get rid of this. Any help very much appreciated, as I am very impressed otherwise. Regards, Richard Scobie

I'm trying to add ooh323c to my asterisk 1.2.7.1 install and did an svn update of asterisk-addons and followed the readme in asterisk-ooh323c and I get through the .configure with no errors. But make causes: rpath /usr/local/lib -L./ooh323c/src -version-info 1:1:0 -lpthread make: rpath: Command not found make: [libchan_h323.la] Error 127 (ignored) I'm not real sure what to try to fix

We've been asked to quote for a large cluster running Asterisk and our ITSP in a box product. The system will be SIP throughout, with mixed codecs. We're considering using Dell blade servers, 1855 or similar, on the grounds that we normally use Dell machines and they work well, but we need higher rack density. Has anyone used these? Any feedback on whether they're

Hey all - we have two TDM400P cards in an SMP Redhat9 box, with 4 FXO ports each running thel latest Asterisk CVS. Users connect to this to share POTS lines using analog phones connected to Sipura SPA-2000 boxes. All works reasonably well, except every day (or more) a line will get "locked up". No other way to describe it really -- the line just stops working, so if someone tries

...serverbehind ALG (Marty Mastera) 8. rfc3680, reginfo+xml (Olivier) 9. How to re-read values from database in Trixbox (Edgar Guadamuz) 10. Re: How to re-read values from database in Trixbox (Diego Iastrubni) 11. Re: Saftware RAID1 or Hardware RAID1 with Asterisk (Richard Scobie) 12. How do I configure asterisk? (fateme fatah) 13. Which interface? (fateme fatah) 14. Re: rfc3680, reginfo+xml (Raj Jain) 15. Cisco firmwares 3.6.3 vs 3.8.6 (Adrian Marsh) 16. Re: compatibility of PRI Two B channel transfers TBTC/2BTC (Matt Florell) 17. Re: DUNDi, So Easy A Cav...

OK, got a question on 911. Looking into setting up a couple asterisk servers at a country club, with VOIP phones in each of 100 short-term residential rental units. Approx 100 extensions, approx 24 outside lines. Since everything is geographically at one location, reaching 911 correctly shouldn't present a problem. However, the club wishes to ensure that 911 authorities are able to identify

Hi all, I'm researching IP phones for a new office setup. We will need 30 phones. I have read the wiki and the polycom site for the phones, but I still had some questions about real world experience with these phones. -According to the documentation, the 500 series ( and 600, according to a polycom rep ) have built in hubs. Has anybody noticed performance issues in this setup, when

Hello. I am going to be putting together my first * system using FXO/FXS interfaces. All the systems I have set up thus far have been pure VoIP setups. The system I need to set up should have 3 FXO interfaces and 1 FXS interface, as well as several SIP phones. I have noticed people complaining about Digium's TDM cards - are these isolated incidents or are these cards unreliable? I intend to