search for: scbus0

Machine is 4.8-STABLE smaug# camcontrol devlist <COMPAQ BD009122BA 3B07> at scbus0 target 0 lun 0 (pass0,da0) <COMPAQ BD009122C6 B016> at scbus0 target 1 lun 0 (pass1,da1) <COMPAQ BD009122BA 3B07> at scbus0 target 2 lun 0 (pass2,da2) <COMPAQ BD00962373 BCJE> at scbus0 target 3 lun 0 (pass3,da3) <IBM IC35L018UCPR15-0 S70H>...

I seem to have managed to end up with a pool that is confused abut its children disks. The pool is faulted with corrupt metadata: pool: d state: FAULTED status: The pool metadata is corrupted and the pool cannot be opened. action: Destroy and re-create the pool from a backup source. see: http://illumos.org/msg/ZFS-8000-72 scan: none requested config: NAME STATE

...1 bus 0 scbus2 target 0 lun 0 ada1: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad6 ses0 at mps0 bus 0 scbus0 target 8 lun 0 ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device ses0: 600.000MB/s transfers ses0: Command Queueing enabled ses0: SCSI-3 ENC Device ses0: probe9,pass1,da0: Element descriptor: 'Slot 01' ses0: probe9,pass1,da0: SAS Device Slot Element: 1 Phys at Slot...

Hi, I am using FreeBSD 8.2 and went to add 4 new disks today to expand my offsite storage. All was working fine for about 20min and then the new drive cage started to fail. Silly me for assuming new hardware would be fine :( The new drive cage started to fail, it hung the server and the box rebooted. After it rebooted, the entire pool is gone and in the state below. I had only written a few

...0.00.003 tws0: <LSI 3ware SAS/SATA Storage Controller> port 0x1000-0x10ff mem 0xb1940000-0xb1943fff,0xb1900000-0xb193ffff irq 32 at device 0.0 on pci4 tws0: Using legacy INTx tws0: Controller details: Model 9750-8i, 8 Phys, Firmware FH9X 5.12.00.007, BIOS BE9X 5.11.00.006 da0 at tws0 bus 0 scbus0 target 0 lun 0 da0: <LSI 9750-8i DISK 5.12> Fixed Direct Access SCSI-5 device da0: 6000.000MB/s transfers da0: 2860992MB (5859311616 512 byte sectors: 255H 63S/T 364725C) Let me know anyone wants to see anything else/has seen this/has any theories! -- Adam Strohl A-Team Systems http:...

...:/usr/obj/usr/src/sys/MCCLELLAN amd64 Dell PowerEdge 2950; ahd0@pci15:3:0: class=0x010000 card=0x00409005 chip=0x80169005 rev=0x10 hdr=0x00 vendor = 'Adaptec Inc' device = 'ASC-39320A Ultra320 SCSI Controller' class = mass storage subclass = SCSI scbus0 on ahd0 bus 0: <SEAGATE DAT DAT72-052 A16E> at scbus0 target 6 lun 0 (sa0,pass0) < > at scbus0 target -1 lun -1 () scbus1 on ahd1 bus 0: < > at scbus1 target -1 lun -1 () scbus-1 on xpt0 bus 0: < >...

...gt; (probe3:ahd0:0:3:0): inquiry data fails comparison at DV2 step (probe2:ahd0:0:2:0): inquiry data fails comparison at DV1 step (ahd0:A:3:0): refuses synchronous negotiation. Using asynchronous transfers (ahd0:A:2:0): refuses synchronous negotiation. Using asynchronous transfers da0 at ahd0 bus 0 scbus0 target 0 lun 0 da0: <FUJITSU MAW3147NC 0104> Fixed Direct Access SCSI-3 device da0: Serial Number DAA0P7A054GD da0: 320.000MB/s transfers (160.000MHz DT, offset 127, 16bit) da0: Command Queueing enabled da0: 140272MB (287277984 512 byte sectors: 255H 63S/T 17882C) cd0 at ata1 bus 0 scbus3 ta...

Overnight I was running a zfs send | zfs receive (both within the same system / zpool). The system ran out of space, a drive went off line, and the system is degraded. This is a raidz2 array running on FreeBSD 8.1-STABLE #0: Sat Sep 18 23:43:48 EDT 2010. The following logs are also available at http://www.langille.org/tmp/zfs-space.txt <- no line wrapping This is what was running: #

...c. USB Embedded Hub, class 9/0, rev 2.00/0.01, addr 2 Aug 5 12:53:58 goshik /kernel: uhub1: 1 port with 0 removable, self powered Aug 5 12:53:58 goshik /kernel: umass0: A-DATA Technology Inc. USB Mass Storage Device, rev 2.00/0.01, addr 3 Aug 5 12:53:58 goshik /kernel: umass0:0:0:-1: Attached to scbus0 as device 0 Aug 5 12:53:58 goshik /kernel: uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 12 at device 17.3 on pci0 Aug 5 12:53:58 goshik /kernel: using shared irq12. Aug 5 12:53:58 goshik /kernel: usb1: <VIA 83C572 USB controller> on uhci1 Aug 5 12:53:58 goshik /kernel:...

Hi Folks, I've facing an intermittent hang with a USB port which seems cam related: Event's that happen are: o USB modem (HUAWEI E220) plugged into PC ugen3.2: <HUA WEI> at usbus3 u3g0: <3G Modem> on usbus3 u3g0: Found 3 ports. umass0: <USB MASS STORAGE> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:6:0:-1: Attached to scbus6 umass1: <USB

...de? Best regards Oliver PS: Excerpt from dmesg ... atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 17.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <IBM-DJNA-352500 J51OA30K> ATA-4 device ada0: 66.700MB/s transfers (UDMA4, PIO 8192bytes) ada0: 24405MB (49981680 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ada1 at ata1 bus 0 scbus1 target 0 lun 0 ada1: <ST3250824A 3.AAE> ATA-7 device ada...

...lists.freebsd.org/pipermail/freebsd-fs/2011-March/011036.html # hint.scbus.0.at="ahcich0" hint.scbus.1.at="ahcich1" hint.scbus.2.at="ahcich2" hint.scbus.3.at="ahcich3" hint.scbus.4.at="ahcich4" hint.scbus.5.at="ahcich5" hint.ada.0.at="scbus0" hint.ada.1.at="scbus1" hint.ada.2.at="scbus2" hint.ada.3.at="scbus3" hint.ada.4.at="scbus4" hint.ada.5.at="scbus5" IMPORTANT: The device names/busses/etc. are going to vary depending on each person's setup, controller, etc.. Proof of thi...

...ahcich0: is 00000002 cs 00000000 ss 00000000 rs 80000000 tfd 50 serr 00000000 cmd 00047f17 (aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich0:0:0:0): CAM status: Command timeout (aprobe0:ahcich0:0:0:0): Error 5, Retry was blocked ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Samsung SSD 840 EVO 120GB EXT0AB0Q> s/n S1D5NSAD915803Y detached ahcich0: Timeout on slot 31 port 0 ahcich0: is 00000001 cs 00000000 ss 00000000 rs 80000000 tfd 50 serr 00000000 cmd 00047f17 (ada0:ahcich0:0:0:0): SETFEATURES ENABLE RCACHE. ACB: ef aa 00 00 00 40 00 00...

...1:25:39 romulus kernel: mps0: SAS Address from SATA device = 6f8376497abfc6b5 Sep 17 11:25:39 romulus kernel: mps0: SAS Address from SATA device = 6f8376567bc1d3c3 Sep 17 11:25:39 romulus kernel: mps0: SAS Address from SATA device = 6f8376528dc0d1c0 Sep 17 11:25:39 romulus kernel: da0 at mps0 bus 0 scbus0 target 0 lun 0 Sep 17 11:25:39 romulus kernel: da1 at mps0 bus 0 scbus0 target 1 lun 0 Sep 17 11:25:39 romulus kernel: da1: <ATA Crucial_CT512MX1 MU02> Fixed Direct Access SPC-4 SCSI device Sep 17 11:25:39 romulus kernel: da0: <ATA Crucial_CT512MX1 MU02> Fixed Direct Access SPC-4 SCSI d...

Hi, I have been trying out a nice new tws controller and decided to enable debugging in the kernel and run some stress tests. With a regular GENERIC kernel, it boots up fine. But with debugging, it panics on boot. Anyone know whats up ? Is this something that should be sent directly to LSI ? pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0

Ok, So this is really more of an observation than anything else.? I had a FreeBSD 10.1 server that was running great. Some SSL issue came up, or I upgrade Dovecot in ports - something occurred and the machine started rebooting randomly.? It would run for 2 weeks, then reboot.? It might run for 5 days and then reboot. So I started doing more FreeBSD upgrades, thinking it was a kernel issue. The

I had a sparc64 (Netra X1) running a stable/9 from late March 2013. Actually, the kernel may've been a bit newer than that as I was working with folks to diagnose and repair some Netra-X1 specific issues. But, ZFS worked fine. I have two pools, zroot as a RAID1 (using equally sized partitions at the front of two large disks), and a zdata that is a large pool of the remaining space of both

Hello there, I've got a question about SATA. I've got ASUS P5GC-MX/1333 with ICH7. (SATA2 support) A few HDD with SATA2. system: uname -a FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #1 r246666: Tue Feb 12 00:19:07 MSK 2013 root at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 camcontrol info camcontrol iden ada2 pass2: <ST3500320AS SD1A> ATA-8 SATA 2.x

...r (probe7:ciss0:0:7:0): SCSI status: Check Condition (probe7:ciss0:0:7:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) (probe7:ciss0:0:7:0): Error 22, Unretryable error uhub4: 4 ports with 4 removable, self powered da0 at ciss0 bus 0 scbus2 target 0 lun 0 cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: <TSSTcorp CDW/DVD TS-L462D HG01> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access...

...gt; Fixed Direct Access SCSI-0 device da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) da6 at hpt27xx0 bus 0 scbus8 target 6 lun 0 da6: <HPT DISK 0_6 4.00> Fixed Direct Access SCSI-0 device da6: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <OCZ-VERTEX4 1.5> ATA-9 SATA 3.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0...