search for: satas

OK, it seems that the kernel I have (stock CentOS 4.7: 2.6.9-78.0.22.EL i686) seems to gronk the nVideo SATA controller in AHCI mode. It is NOT able to deal with the SATA DVD Burner I have. It is a "Sony Optiarc DVD Burner with LightScribe Black SATA Model AD-7241S-0B LightScribe Support". Is there some special magic I need to do? Here is the relevant bit from the boot up (SATA ports

> > > > > [root at darkness ~]# ls -al /dev/sr* > > ls: cannot access /dev/sr*: No such file or directory > > [root at darkness ~]# ls /dev/s* > > /dev/sda /dev/sda3 /dev/sdb1 /dev/sg0 /dev/stderr > > /dev/sda1 /dev/sda4 /dev/sdb2 /dev/sg1 /dev/stdin > > /dev/sda2 /dev/sdb /dev/sdb3 /dev/snapshot /dev/stdout > > [root at

I am having problems with silent data corruption on (some) drives connected to an MCP55 SATA controller. I have two servers, both running RELENG_7_0/amd64. One has the 570 Ultra chipset, the other has 570 SLI. Both chipsets have the MCP55 SATA controller. The server with 570 Ultra chipset has a bunch of older 250GB SATA-150 drives hooked up to the MCP55 controller and it is working just fine.

I intend to replace fading SCSI drive by a SATA one. The motherboard is PCI and no SATA controller on board. So I need a SATA/PCI controller. Is there something wrong to do this kind of switch? Some told me that I won't be able to boot that drive. Loosing part of the SATA interface speed is not a decisive factor on this machine Is there are some prefered Linux SATA controller? Need

I have an old computer running CentOS 5. I need to add an SATA drive to it, but it doesn't have any ports, so I need an add-on card. The board only has a 32-bit PCI slot. Any recommendations on cards/brands that work well with CentOS? I don't need any raid capabilities, I just need a couple of SATA connections. Thanks, -- Bowie

There have been several threads about SATA in the past weeks and the problems with it. I'm still not clear, though, if SATA in general is a problem or just specific functionality or hardware. Do I understand correctly that "mainboard built-in" SATA RAID is a nono on CentOS? That I would need a third-party RAID card for this? What about SATA non-RAID or SATA2? Is SATA supposed to

What's the status of the SATA controller migration bug? Are the patches for it expected to be in 2.4? Looks like they didn't make it into 2.3. Since you last wrote, if the SATA controller patches aren't in yet, is there any new way to avoid the SATA controller device, if you have no SATA devices? Thank you. === REPLYING TO === On 02/23/2015 02:26 PM, Thomas Stein wrote: >

I need to replace a slow HP MSA20 that's a bottleneck right now (We are an HP shop). HP's only option with 3.5" SATA drives is stuck at SATA I behind a SAS controller. Dell makes an MD1000 that claims SATA II speeds behind a SAS Perc 5/E (Don't know anything about dell). Anyone got any real world info they can share? I need 3.5" SATA II at least 12 drives behind SAS, I am

Hello everyone, As one of the steps of improving my ZFS home fileserver (snv_134) I wanted to replace a 1TB disk with a newer one of the same vendor/model/size because this new one has 64MB cache vs. 16MB in the previous one. The removed disk will be use for backups, so I thought it''s better off to have a 64MB cache disk in the on-line pool than in the backup set sitting off-line all

Hello I have a strange issue, I''m having a setup with 24 disk enclosure connected with LSI3801-R. I created two pools. Pool have 24 healthy disks. I disabled LUN persistency on the LSI adapter. When I cold boot the server (power off by pulling all power cables), a warning is shown on the console during boot: .... WARNING: /pci/path/ ... (mpt0): wwn for traget has changed

Hello there, I've got a question about SATA. I've got ASUS P5GC-MX/1333 with ICH7. (SATA2 support) A few HDD with SATA2. system: uname -a FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #1 r246666: Tue Feb 12 00:19:07 MSK 2013 root at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 camcontrol info camcontrol iden ada2 pass2: <ST3500320AS SD1A> ATA-8 SATA 2.x

Hi, Does anybody has any experience with e-sata on CentOS5.2? - How fast is it? Same as an internal sata? - Does it support sata-2? - Does it "hot-plug" like a USB? -- Thanks http://www.911networks.com When the network has to work

Just wondering if any 4.2 users out there have a favourite "dumb" PCI controller to add a couple of SATA ports to a motherboard that doesn't include SATA support. I'm not looking for anything fancy, just 2 SATA ports that a recent vintage kernel will recognize without a lot of configuration gymnastics. The intended use is for relatively light weight internet browser

Dear Everybody, I am telling you the whole story, perhaps you can give me a better idea. Almost 3 years ago I purchased Arima HDAMA rev. G motherboard with integrated Silicon Image Sil3114 Serial ATA 4 Ports SATA I adapter. ( http://www.arimacorp.com/ViewProduct.asp?View=86 ) . BIOS version is 2.13. My intention is to make a file server, using linux software raid, so I bought 2 new shiny 1TB

Looking at the Dell PowerEdge 440SC web page for Colombia. The box will have two 250 GB SATA drives. The HD controller is: SAS 5IR SAS,Internal Raid Adapter (SAS5IR) for HD Configuration) the options are: (1) Add-in SAS5iR (SATA/SAS Controller)-RAID 0 (ASASR0) (2) Onboard SATA, 2 Drives connected to Onboard SATA Controller No RAID (MST2) (3) Add-in SAS5iR (SATA/SAS Controller) which supports

On Solaris x86, does zpool (or anything) support PATA (or SATA) IDE SMART data? With the Predictive Self Healing feature, I assumed that Solaris would have at least some SMART support, but what I''ve googled so far has been discouraging. http://prefetch.net/blog/index.php/2006/10/29/solaris-needs-smart-support-please-help/ Bug ID: 4665068 SMART support in IDE driver

HI Can I install Centos on Segate ST3160812AS ( SATA II ) Harddisk? Asky

On Tue, Oct 14, 2008 at 09:52:09PM -0400, John R. Huston wrote: > Hi, I am not very familiar with using mailing lists so if I have made > a mistake in the format or scope of the message please correct me. I > am pretty desperate for an answer by now so any help at all is really > very appreciated. > > I have a Shuttle SD30G2 computer (Specs: >

Hello. I'm not able to disable the sata controller on a machine='pc-q35-2.1' type VM. Whenever i delete: <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> it gets added again when i close the editor. The reason i would

I've been having an extremely hard time using the on board SATA controller on my nvidia based board. I have two 160gig Maxtor SATA drives attached to the on board controller, setup as software raid0. The problem is the array is extremely unreliable, where I'm getting constant I/O errors like: sd 0:0:0:0: SCSI error: return code = 0x00040000 end_request: I/O error, dev sda, sector