search for: sata_via

Hi, I have a machine running under CentOS 3.4 which I want to upgrade to CentOS 4. I booted using the CentOS 4 CD1 using "linux upgradeany". Problem is that loading sata_via never terminates. Ismod shows the sata_via module in state "Loading" while all others are in state "Live". The dmesg output shows that the module gets loaded, sees two disks, then prints info about the first one and is stuck there. I can of course provide the exact output if n...

...s P5VD2-MX, it has a VIA chipset. The problem is sometimes without any reason all freeze, can't use network and when I type a command in shell occur a I/O error. I already test memory, and the problem are in two similars machines. I see in CentOS foruns someone with the same problem using the sata_via driver but without an answer. I'm running Centos 5, in BIOS disable Jmicron raid, and the sata is in IDE mode. Thanks all.

Hi people, I installed a via SATA controller in a CentOS release 3.8 (Final) - I needed additional disk space. After the first boot, the kudzu service, added the following line to /etc/modules.conf: alias scsi_hostadapter sata_via and I rebooted. After reboot in dmesg one can see: scsi0 : sata_via scsi1 : sata_via Vendor: ATA Model: SAMSUNG HD080HJ Rev: WT10 Type: Direct-Access ANSI SCSI revision: 05 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 156301488 512-by...

Hello, A message was already posted here regarding this issue- I experience the same problem with 6 machines, all with Hitachi harddrive, VIA Motherboard which uses the sata_via driver: Once every few days each machine freezes or just stops reading from the HD and throws i/o error messages as pasted below. Note that the first "ata exception Emask" errors apear right after booting, when harddisks plays smoothly. the I/O errors apear only after few hours-days....

Hi, Which of the Mercurial repos contains Linux kernel sources that were used to build the Xen 3.1 binary distribution? I have this question because I am suspecting that the sata_via driver included in the distribution is not supporting my SATA controller VIA8237x (I get error messages when modprobe''ing it from an init ramdisk). This repo (http://xenbits.xensource.com/linux-2.6-xen.hg) seems to contain kernel 2.6.16 (sata_via driver is very old there). Are xen-patched...

Hello everyone. I am looking for a way to move a CentOS 4 installed production hard disk to another system (which has another hardware). The first has an nvidia sata controller (sata_nv), but the second has a via sata (sata_via). For all the rest of the hardware it can upgrade well I know, but if the sata driver is different, then the system doesn't boot because the proper driver is not included in the initrd file (grub still boots OK). Here is the error message: Uncompressing Linux... Ok, booting the kernel. Red H...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, Is the sata_nv (based on SCSI) driver supposed to work with Xen? When I tried to boot my dom0 kernel recompiled with the sata_nv drivers enabled my kernel locks up, I guess when probing the first drive connected via S-ATA. ("Screenshot" here: <URL:http://mjh.name/xen.lock.1.jpg>) (Kernel also says that partition tables of the

...irc ip_conntrack nfnetlink ip_tables x_tables ipv6 ipip tunnel4 dm_snapshot dm_mirror dm_mod shpchp pci_hotplug i2c_viapro psmouse i2c_core serio_raw pcspkr evdev amd64_agp agpgart parport_pc parport rtc floppy ide_generic r8169 uhci_hcd ehci_hcd usbcore thermal processor fan raid0 raid1 md_mod sata_via sd_mod libata scsi_mod via82cxxx ide_core ext3 jbd mbcache EIP: 0060:[<f8836d37>] Not tainted VLI EFLAGS: 00010283 (2.6.18-2-k7 #1) [<f8832d2f>] journal_try_to_free_buffers+0x59/0x13a [jbd] [<f8868318>] ext3_releasepage+0x0/0x61 [ext3] [<c015bd3f>] try_...

...v6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_sta te nf_conntrack ip6table_filter ip6_tables blktap xen_netback xen_blkback xen_gntdev xen_evtchn xenfs xen_privcmd ppdev parport_pc parport fjes 3c59x asus_atk0110 pcspkr serio_raw k8temp vi a_rhine mii i2c_viapro shpchp raid1 pata_via pata_acpi ata_generic sata_via [59826.069842] CPU: 0 PID: 32443 Comm: sshd Not tainted 4.9.23-26.el6.x86_64 #1 [59826.069860] Hardware name: System manufacturer System Product Name/K8V-VM, BIOS 0201 06/13/2006 [59826.069882] task: ffff880014c8c900 task.stack: ffffc90043820000 [59826.069896] RIP: e030:[<ffffffff812405d6>...

...30600 0 via_rhine 22148 0 mii 5376 1 via_rhine uhci_hcd 29712 0 usbcore 116228 3 ehci_hcd,uhci_hcd generic 4484 0 [permanent] ide_core 114208 5 ide_disk,ide_cd,ide_generic,via82cxxx,generic sata_via 8452 3 libata 52236 1 sata_via scsi_mod 128488 2 sd_mod,libata thermal 13704 0 processor 23744 1 thermal fan 4868 0 unix 26544 24

...6180 0 sata_mv 12744 0 ata_piix 8068 0 ahci 10788 0 sata_qstor 6372 0 sata_vsc 5412 0 sata_uli 4772 0 sata_sis 5188 0 sata_sx4 9700 0 sata_nv 6212 0 sata_via 5668 0 sata_svw 4932 0 sata_sil24 7812 0 sata_sil 6440 0 sata_promise 7748 0 libata 40268 15 pdc_adma,sata_mv,ata_piix,ahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil24,...

...Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- and my modprobe.conf (generated by kudzu) looks like: alias eth0 r8169 alias scsi_hostadapter sata_via alias snd-card-0 snd-via82xx options snd-card-0 index=0 options snd-via82xx index=0 remove snd-via82xx { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-via82xx I can always stick a spare sound card in the remaining PCI slot but the sound card...

...3w_sas mptsas scsi_transport_sas mptfc scsi_transport_fc mptspi mptscsih mptbase imm parport sym53c8xx initio arcmsr aic7xxx aic79xx scsi_transport_spi sr_mod cdrom sg sd_mod pdc_adma sata_inic162x sata_mv ata_piix ahci libahci [ 1730.734208] sata_qstor sata_vsc sata_uli sata_sis sata_sx4 sata_nv sata_via sata_svw sata_sil24 sata_sil sata_promise pata_via pata_jmicron pata_marvell pata_sis pata_netcell pata_pdc202xx_old pata_atiixp pata_amd pata_ali pata_it8213 pata_pcmcia pata_serverworks pata_oldpiix pata_artop pata_it821x pata_hpt3x2n pata_hpt3x3 pata_hpt37x pata_hpt366 pata_cmd64x pata_sil680 pa...

Hi, I just installed CentOS 4.3 on a PATA drive and later installed 2 SATA2 (300mbit/s) disk drives. The patched sata_via driver detect the drives and I can use them, but only if I manually create the /dev/sda and /dev/sdb files using mknod. My question is: why udev does not create /dev/sda at boot time? Many thanks Oliver -- Oliver Schulze L. <oliver at samera.com.py>

...address 20746f6c printing eip: 20746f6c *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: rtc wcte12xp firmware_class zaptel crc_ccitt tg3 e1000 nfs lockd sunrpc jfs dm_mirror dm_mod scsi_wait_scan pdc_adma sata_mv ata_piix ahci sata_qstor sata_vsc sata_uli sata_sis pata_sis sata_sx4 sata_nv sata_via sata_svw sata_sil24 sata_sil sata_promise libata sbp2 ohci1394 ieee1394 sl811_hcd usbhid ohci_hcd uhci_hcd usb_storage ehci_hcd usbcore CPU: 0 EIP: 0060:[<20746f6c>] Not tainted VLI EFLAGS: 00010206 (2.6.22-gentoo-r9 #1) eax: f7960270 ebx: f7960270 ecx: c03d0f10 edx: 20746f6c...

...[ OK ] iptables: Applying firewall rules: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. # cat /etc/modprobe.conf ### Hetzner Online AG - installimage # load all modules # networking alias eth0 r8169 # hdds alias scsi_hostadapter sata_via alias scsi_hostadapter1 sata_sil alias scsi_hostadapter2 sata_nv alias scsi_hostadapter3 sd_mod alias scsi_hostadapter4 ahci alias scsi_hostadapter5 raid0 alias scsi_hostadapter6 raid1 alias scsi_hostadapter7 raid5 alias scsi_hostadapter8 raid6 alias scsi_hostadapter9 raid10 alias scsi_hostadapter1...

...n Layer for the Itanium2 architecture. - Updated Intel Centrino ipw2100/ipw2200 wireless drivers and firmware. - Driver updates including ata_piix, bonding, e1000, e100, ibmveth, libata, lpfc, megaraid_mbox, megaraid_mm, sata_nv, sata_promise, sata_sil, sata_sis, sata_svw, sata_via, sata_vsc, and tg3 - Many platform hardware support updates and bug fixes. - Security updates, bug fixes, and feature enhancements to numerous system packages. Errata Advisories describing specific changes in Update 1 are available online at: https://rhn.redhat.com/errata/rhel4as-erra...

..._timer snd_seq_device k8temp i2c_viapro snd soundcore bttv video_buf firmware_class ir_common compat_ioctl32 i2c_algo_bit btcx_risc tveeprom i2c_core videodev v4l2_common v4l1_compat shpchp pci_hotplug usb_storage evdev usbhid hid xfs raid1 md_mod ide_cd cdrom ide_disk ata_generic ehci_hcd uhci_hcd sata_via libata scsi_mod via82cxxx generic ide_core r8169 thermal processor fan Pid: 2896, comm: Xorg Tainted: P 2.6.22-2-amd64 #1 RIP: 0010:[<ffffffff885d3d7c>] [<ffffffff885d3d7c>] :nouveau:nv04_instmem_init+0x67/0x1d3 RSP: 0018:ffff81001dde7bf8 EFLAGS: 00010202 RAX: 0000000000010000 RB...

Red Hat is pleased to announce the availability of Update 2 for the Red Hat Enterprise Linux 4 family of products, including: - Red Hat Enterprise Linux AS 4 for x86, AMD64/EM64T, Itanium, POWER, S/390 and zSeries - Red Hat Enterprise Linux ES 4 for x86, AMD64/EM64T, Itanium - Red Hat Enterprise Linux WS 4 for x86, AMD64/EM64T, Itanium - Red Hat Desktop 4 for x86 and AMD64/EM64T Craig

...s snd_mpu401 ac97_bus snd_mixer_oss snd_mpu401_uart snd_rawmidi ns558 parport_pc snd_pcm snd_seq_device parport gameport snd_timer i2c_viapro k8temp hwmon pcspkr snd i2c_core soundcore snd_page_alloc floppy sky2 button shpchp sg sr_mod cdrom dm_snapshot dm_zero dm_mirror dm_mod pata_via ata_generic sata_via libata sd_mod scsi_mod raid456 async_xor async_memcpy async_tx xor raid1 ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd Mar 30 12:26:39 jgs kernel: Pid: 22305, comm: smbd Not tainted 2.6.23.15-80.fc7 #1 Mar 30 12:26:39 jgs kernel: RIP: 0010:[<ffffffff81079004>] [<ffffffff81079004>] __inc_z...