search for: sata_sil

All, I have a problem with a new Seagate hard disk. The problem occurs when i go to install CentOS, i insert the cd and start the boot up process, when it gets to the section where it detects the hard disks, the driver is seems crashes, the message it produces complains about no one caring about a interrupt on IRQ11. The hard disk is a Seagate 200GB 8MB SATA150 NCQ drive, on a SilliconImage

Hi, On my x86_64 system I have a SiL311x controller that can do RAID. If I configure my 2 identical disks in a RAID1 setup, I would expect to see only 1 block device on Linux. Still I see 2 block devices. Is this intentional, and if so, isn't that dangerous ? (i.e. writing to both disks at the same time) Anyone with an insight, please explain :) -- dag wieers, dag at wieers.com,

On my C5 machine (a Dell XPS420) I have a 500Gb disk on the internal SATA controller. I also have a SiI3132 dual-port multi-device eSATA card. This is connected to an external SATA array of disks. Now occasionally I see something like this in my logs ata7.01: exception Emask 0x0 SAct 0x0 SErr 0x0 a ction 0x0 ata7.01: irq_stat 0x00060002, device error via D 2H FIS ata7.01: cmd

...99 13 81 14% /boot tmpfs 1012 0 1012 0% /dev/shm /dev/dm-2 9917 151 9254 2% /tmp /dev/dm-3 9917 237 9168 3% /var # cat /etc/modprobe.conf | tail -n 1 alias scsi_hostadapter sata_sil I installed CentOS 4.4 64bit on the other system, but I could not enable RAID. The installer was always seeing 2 separate drives instead of one RAID device. Was it my mistake? Did I not enable the proper settings in the BIOS? (I tried quite a few different settings) Or is it perhaps that the...

...ill loads its BIOS, and still shows up in dmesg (this produced with a default boot, non-quiet): [snip] ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 Freeing unused kernel memory: 148k freed SCSI subsystem initialized libata version 1.10 loaded. sata_sil version 0.8 ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10 ata1: SATA max UDMA/100 cmd 0xE0832080 ctl 0xE083208A bmdma 0xE0832000 irq 10 ata2: SATA max UDMA/100 cmd 0xE08320C0 ctl 0xE08320CA bmdma 0xE0832008 irq 10 ata1: no device found (phy stat 00000000) scsi0 : sata_s...

I finished to try to install Asterisk Now 1.4.0 on an AMD 3800 dual processor machine. The install lookups on the search for the Sata drive, since however it loads the sata_sil driver it doesn't work. Did someone knows what version of Linux is using on Asterisk Now? Thanks, Carlos Alperin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061220/112d071b/attachment.htm

...mount -t sysfs /sys /sys echo Creating /dev mount -o mode=0755 -t tmpfs /dev /dev mknod /dev/console c 5 1 mknod /dev/null c 1 3 mknod /dev/zero c 1 5 mkdir /dev/pts mkdir /dev/shm echo Starting udev /sbin/udevstart echo -n "/sbin/hotplug" > /proc/sys/kernel/hotplug echo "Loading sata_sil.ko module" insmod /lib/sata_sil.ko echo "Loading md.ko module" insmod /lib/md.ko echo "Loading raid1.ko module" insmod /lib/raid1.ko echo "Loading xor.ko module" insmod /lib/xor.ko echo "Loading raid5.ko module" insmod /lib/raid5.ko /sbin/udevstart raida...

...l from the initrd to boot, THEN the addon controller is detected and hence the third drive (sdc). If I am correct, then I need to update my initrd for the system to see and use that third drive during the boot process. Can anyone lend a few tips or pointers on how to proceed? I essentially need the sata_sil driver to be included in the initrd. All tips welcome. Thank you! Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 x105

Hi folks, I have just installed a PCI SATA controller based on the SIL3112A chipset into my Centos-3 (latest kernel patches applied) system and moved an existing (not the boot disk) SATA drive from the onboard controller to the SIL-based one so I can setup software RAID with two 300GB drives. Kudzu/Linux found the controller and drives straight away and they've appeared as 'hda' and

...rewalling (i'll try some brouting like stuff too, but it's not there yet) Panic output: Unable to handle kernel NULL pointer dereference at virtual address 0000000c printing eip: c0359b67 *pde = 00000000 Oops: 0000 [#1] Modules linked in: ebt_ip ebtable_filter ebtbles rtc sata_nv nvsound sata_sil nvnet eepro100 3c59x r8169 CPU: 0 EIP: 0060:[<c0359b67>] Tainted: P VLI EFLAGS: 00010282 (2.6.15) EIP i at br_nf_pre_routing_finish+0x1a/0x2c0 eax: 00000000 ebx: 00000000 ecx: c0475e9c edx: dfb2c5a0 esi: cv760820 edi: 80000000 ebp: deefe000 esp: c0475de0 ds: 007b...

...w pcspkr i2c_i801 ehci_pci i2c_core lpc_ich asus_atk0110 wmi button thermal_sys i7core_edac microcode mfd_core edac_core ext4 crc16 jbd2 mbcache btrfs xor raid6_pq libcrc32c dm_mod raid1 md_mod sg sd_mod crct10dif_generic crc_t10dif crct10dif_common hid_generic usbhid hid crc32c_intel firewire_ohci sata_sil firewire_core crc_itu_t r8169 mii uhci_hcd ehci_hcd ahci libahci xhci_hcd libata usbcore scsi_mod usb_common Nov 18 06:59:46 hsad-srv-03 kernel: [158311.402393] CPU: 2 PID: 3621 Comm: btrfs Tainted: G O 3.12.0 #1 Nov 18 06:59:46 hsad-srv-03 kernel: [158311.402394] Hardware name: System ma...

I recently came across an enormous cluster of x86 clone machines running fedora core 1 (2.4.24) which have typically all intel or amd have VIA IDE chipsets. They frequently experience corrupted journals rendering the ext3 partition in read-only mode. More important than recovering the filesystem, I am interested in finding the root of the problem. The common hardware that all of these

...rnel: SMP Jun 9 10:58:28 uk kernel: Modules linked in: nls_utf8 usb_storage vfat fat md5 ipv6 parport_pc lp parport tun sunrpc ipt_MASQUERADE ipt_TOS ipt_LOG iptable_filter iptable_mangle iptable_nat ip_conntrack ip_tables button battery ac ohci_hcd e1000 tg3 floppy st ext3 jbd dm_mod gdth aic79xx sata_sil libata sd_mod scsi_mod Jun 9 10:58:28 uk kernel: CPU: 0 Jun 9 10:58:28 uk kernel: EIP: 0060:[<c01450fd>] Not tainted VLI Jun 9 10:58:28 uk kernel: EFLAGS: 00010216 (2.6.9-22.0.1.EL.1omsmp) Jun 9 10:58:28 uk kernel: EIP is at vma_prio_tree_add+0x36/0x95 Jun 9 10:58:28 uk kernel...

...reed Write protecting the kernel text: 2380k Write protecting the kernel read-only data: 1212k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Uniform Multi-Platform E-IDE driver SCSI subsystem initialized ACPI: bus type scsi registered libata version 3.00 loaded. sata_sil 0000:00:0c.0: version 2.4 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 15 PCI: setting IRQ 15 as level-triggered scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 mmio m512 at 0xf0005000 tf 0xf0005080 irq 15 ata2: SATA max UDMA/100 mmio m512 at 0xf0005000 tf 0xf00050c0 irq 15 ata1: SATA l...

...8068 0 ahci 10788 0 sata_qstor 6372 0 sata_vsc 5412 0 sata_uli 4772 0 sata_sis 5188 0 sata_sx4 9700 0 sata_nv 6212 0 sata_via 5668 0 sata_svw 4932 0 sata_sil24 7812 0 sata_sil 6440 0 sata_promise 7748 0 libata 40268 15 pdc_adma,sata_mv,ata_piix,ahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil24,sata_sil,sata_promise sbp2 15848 0 ohci1394...

...i_transport_sas mptfc scsi_transport_fc mptspi mptscsih mptbase imm parport sym53c8xx initio arcmsr aic7xxx aic79xx scsi_transport_spi sr_mod cdrom sg sd_mod pdc_adma sata_inic162x sata_mv ata_piix ahci libahci [ 1730.734208] sata_qstor sata_vsc sata_uli sata_sis sata_sx4 sata_nv sata_via sata_svw sata_sil24 sata_sil sata_promise pata_via pata_jmicron pata_marvell pata_sis pata_netcell pata_pdc202xx_old pata_atiixp pata_amd pata_ali pata_it8213 pata_pcmcia pata_serverworks pata_oldpiix pata_artop pata_it821x pata_hpt3x2n pata_hpt3x3 pata_hpt37x pata_hpt366 pata_cmd64x pata_sil680 pata_pdc2027x [ 1730...

...c_core pcspkr mxm_wmi serio_raw processor snd_page_alloc snd_timer button wmi thermal_sys snd soundcore microcode ext 4 crc16 jbd2 mbcache btrfs xor zlib_deflate raid6_pq libcrc32c dm_mod raid1 md_mod sd_mod crc_t10dif sg hid_generic usbhid hid firewire_ohci crc32c_intel firewire_core crc_itu_t sata_sil r8169 mii ahci libahci libata uhci_hcd ehci_hcd scsi_mod xhci_hcd usbcore usb_common [last un loaded: vboxdrv] Jun 25 17:02:25 hsad-srv-03 kernel: [870100.614245] Pid: 2235, comm: btrfs-transacti Tainted: G O 3.9.6 #1 Jun 25 17:02:25 hsad-srv-03 kernel: [870100.614247] Call Trace: Jun 2...

...30720 8 sr_mod 17956 0 sg 36880 0 cdrom 37408 1 sr_mod usbhid 32128 1 hid 38784 1 usbhid pata_amd 14212 0 floppy 59588 0 ohci1394 33584 0 sata_sil 12296 4 ieee1394 93752 2 sbp2,ohci1394 aic7xxx 178264 0 scsi_transport_spi 25472 1 aic7xxx pata_pdc2027x 12676 1 ata_generic 8324 0 3c59x 46376 0 mii 6400 1 3c59x skge...

Does CentOS support NCQ on SATA drives? If so is there something I must do to turn this support on? Matt

...printing eip: 20746f6c *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: rtc wcte12xp firmware_class zaptel crc_ccitt tg3 e1000 nfs lockd sunrpc jfs dm_mirror dm_mod scsi_wait_scan pdc_adma sata_mv ata_piix ahci sata_qstor sata_vsc sata_uli sata_sis pata_sis sata_sx4 sata_nv sata_via sata_svw sata_sil24 sata_sil sata_promise libata sbp2 ohci1394 ieee1394 sl811_hcd usbhid ohci_hcd uhci_hcd usb_storage ehci_hcd usbcore CPU: 0 EIP: 0060:[<20746f6c>] Not tainted VLI EFLAGS: 00010206 (2.6.22-gentoo-r9 #1) eax: f7960270 ebx: f7960270 ecx: c03d0f10 edx: 20746f6c esi: f88fab54 e...