search for: sata300

...a couple of times when on high disk load. Finally, while building some port it won't boot for no reason obvious to me. This is what I get with kernel.geom.mirror.debug=2: ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 476940MB <SAMSUNG HD501LJ CR100-13> at ata2-master SATA300 ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: nVidia check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed GEOM_MIRROR[2]: Tasting ad4. ad4: LSI (v2) check1 failed magic: GEOM::MIRROR version: 4 name: gm0 mid:...

...RT capability. SMART support is: Enabled At this point all seems SATA2 capatible. But at loading: atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 atapci1: <Intel ICH7 SATA300 controller> port 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xa800-0xa803,0xa400-0xa40f irq 23 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci1 ata3: <ATA channel> at channel 1 on atapci1 Looks like it's also SATA2 (SATA300) But HDD says this: ada2 at ata2 bus...

Hi there colleagues, atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xefcb3000-0xefcb3fff irq 23 at device 5.2 on pci0 atacontrol detach ata7 - insert ATA disk (ad14) atacontrol attach ata7 pinics with Fatal trap 12: page fault while in kernel mode (kgdb) bt #0 doa...

...s (209363092 bytes/sec) offsitetmp# offsitetmp# dd if=/dev/zero of=/tank1/test bs=2048k count=1000 1000+0 records in 1000+0 records out 2097152000 bytes transferred in 10.733547 secs (195382943 bytes/sec) offsitetmp# Drives are raidz ad1: 1430799MB <Seagate ST31500341AS CC1H> at ata3-master SATA300 ad2: 1430799MB <Seagate ST31500341AS CC1H> at ata4-master SATA300 ad3: 1430799MB <Seagate ST31500341AS CC1H> at ata5-master SATA300 ad4: 1430799MB <Seagate ST31500341AS CC1H> at ata6-master SATA300 on ich9 ---Mike -----------------------------------------------------...

Hey folks, So what's the word on AHCI and bios drive geometry? I'm having a real pain of a time trying to get some 750gb sata drives running on my FreeBSD7 box in AHCI mode. It doesn't seem to matter what disk geometry I suggest to sysinstall, something complains of an invalid disk upon booting it. Actually, in AHCI mode the bios screen doesn't report any information on

On Tue, Oct 14, 2008 at 09:52:09PM -0400, John R. Huston wrote: > Hi, I am not very familiar with using mailing lists so if I have made > a mistake in the format or scope of the message please correct me. I > am pretty desperate for an answer by now so any help at all is really > very appreciated. > > I have a Shuttle SD30G2 computer (Specs: >

...s $ vmstat -i interrupt total rate irq1: atkbd0 3 0 irq9: acpi0 1 0 irq16: ohci0 1 0 irq17: ohci1 ohci3 1 0 irq18: ohci2 ohci4 1 0 irq22: atapci0 57317362717 134713 cpu0: timer 850996016 2000 cpu1: timer 850995703 2000 Total 59019354443 138713 [root@box /etc]# atacontrol mode ad4 current mode = SATA300 [root@box /etc]# atacontrol mode ad6 current mode = SATA300 Some relevant lines from dmesg: atapci0: port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 18.0 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with...

Hi List I have a Promise SATA 300 TX ( NOT raid ) that do have RHEL4 driver, but this driver doesn?t work with CentOS4 Why? What can I do to get a driver that works? SATAII150/SATA300 TX series RHEL4 32-bit Driver http://www.promise.com/support/download/download2_eng.asp?productID=139&cate gory=all&os=100# This one should be for the correct 2.6 kernel, but it's no go I get this error: #sh install Promise SATA II 150/300 Driver Installation...failed No...

...depending on my BIOS settings. Always after verifying dependencies, and typically during the disk format process, the installation freezes. I get a "kernel panic - not syncing" in text mode. Single disks, dual disks, LVM, no-LVM, software RAID, even when disks are on a Promise SATA300-TX4. The single-core Celeron processors work fine, but none of the dual core processors work. I'm using 5 sets of hardware, so bad hardware is unlikely. I'm stumped. Anyone out there with similar problems and/or workarounds? Any ideas? -Ken

...rboard with an AMD Opteron 175. Relevant dmesg output: atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xd3002000-0xd3002fff irq 21 at device 7.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3...

...er> port 0x4420-0x4427,0x4414-0x4417,0x4418-0x441f,0x4410-0x4413,0x4400-0x440f irq 23 at device 4.0 on pci17 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c10-0x1c1f,0x1c00-0x1c0f at device 31.2 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH9 SATA300 controller&g...

...ture in FreeBSD. Timecounters tick every 1.000 msec ZFS filesystem version 6 ZFS storage pool version 6 acd0: DMA limited to UDMA33, controller found non-ATA66 cable acd0: DVDR <Memorex DVD+-RAM 510L v1/MWS7> at ata0-master UDMA33 ad4: 381554MB <Seagate ST3400620AS 3.AAJ> at ata2-master SATA300 ad6: 381554MB <Seagate ST3400620AS 3.AAJ> at ata3-master SATA300 ad8: 476940MB <Seagate ST3500630AS 3.AAE> at ata4-master SATA300 ad10: 381554MB <Seagate ST3400620AS 3.AAJ> at ata5-master SATA300 ad12: 381554MB <Seagate ST3400620AS 3.AAJ> at ata6-master SATA300 ad14: 381554M...

...0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <Intel ICH7 SATA300 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfe8ffc00-0xfe8fffff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI called from vendor specific driver atapci1: AHCI Version 01.10 controller with 4 ports detected ata2: <ATA channel 0&...

I am having problems with silent data corruption on (some) drives connected to an MCP55 SATA controller. I have two servers, both running RELENG_7_0/amd64. One has the 570 Ultra chipset, the other has 570 SLI. Both chipsets have the MCP55 SATA controller. The server with 570 Ultra chipset has a bunch of older 250GB SATA-150 drives hooked up to the MCP55 controller and it is working just fine.

Hello fellow listers... I'd like to get some recommendations on a good SATA controller for use with CentOS 5.x. It should be PCI, bootable, have 4 SATA ports, have native support (no crap proprietary or manually compiled drivers), and possibly hot swap support. Any ideas? There are plenty of PCI-X and PCIe controllers that I think would work but the use for this card is in a smaller 1U

I've been burned by Sata not working on an Asus motherboard (nVidia / nForce) and need to select something that will work for a fairly light duty web/mail/sql server. How do I go about finding out if a specific motherboard will work with sata software raid and Centos 4.4 (or 5.x when it's settled down). Cheers; Alex V. -- This message has been scanned for viruses and dangerous

Greetings all- I need to purchase a PCIe SATA or SAS controller(non-raid) for a Supermicro 2U system. It should be directly bootable. Any recommendations? The system will be running CentOS 5.4 as an LTSP system. Thanks! --Tim

...y a single pool and sizing my disks equally. I only need about 500GB of usable space and so I was considering the value of 4x 250GB SATA Drives versus 5x 160GB SATA drives. I had intended to use an AMS 5 disk in 3 5.25" bay hot-swap backplane. http://www.american-media.com/product/backplane/sata300/sata300.html I priced Seagate 250GB and 160GB SATA drives at $70 and $54 USD each, respectively. The backplane runs about $130. The config options I considered are: RZ1 +spare RZ2 -spare mirror(s) (+spare w/ 5 160GB disks) Using Richard''s blogs to help my evaluation I made the followi...

..., addr 1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 22 at device 14.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pci3: <ACPI PCI bus&gt...

I suspect it''s probably not a good idea but I was wondering if someone could clarify the details. I have 4 250G SATA(150) disks and 1 250G PATA(133) disk. Would it cause problems if I created a raidz1 pool across all 5 drives? I know the PATA drive is slower so would it slow the access across the whole pool or just when accessing that disk? Thanks for your input. - Chris