Displaying 6 results from an estimated 6 matches for "sas_addr".
2010 Oct 08
1
SCSI/SAS error message by mpt2sas.ko
...00)
mpt2sas0: Protocol=(Initiator,Target<6>mpt2sas0: Dell PERC H200
Integrated: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1E)
), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set
Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x5842b2b0194dce00), phys(8)
mpt2sas0: failure at
drivers/scsi/mpt2sas/mpt2sas_scsih.c:4637/_scsih_add_device()!
mpt2sas0: port enable: SUCCESS
Vendor: Dell Model: Virtual Disk Rev: 1028
Type: Direct-Access ANSI SCSI revision: 06
scsi 0:1:0:0: RAID1: handle(0x00...
2012 Sep 05
3
BTRFS thinks device is busy [kernel 3.5.3]
...69] device label firstpool devid 13 transid 31965 /dev/sdq
[92728.516695] device label firstpool devid 14 transid 31965 /dev/sdr
[92728.551786] device label firstpool devid 3 transid 31490 /dev/sdg
[92750.177157] end_device-4:0:19: mptsas: ioc0: removing sata device:
fw_channel 0, fw_id 12, phy 12,sas_addr 0x50030480008a364c
[92750.177163] phy-4:0:20: mptsas: ioc0: delete phy 12, phy-obj
(0xffff8803ab81d400)
[92750.177170] port-4:0:19: mptsas: ioc0: delete port 19, sas_addr
(0x50030480008a364c)
[92750.178149] sd 4:0:18:0: [sdg] Synchronizing SCSI cache
[92750.178326] sd 4:0:18:0: [sdg]
[92750.17833...
2011 Feb 23
2
LVM problem after adding new (md) PV
...t.
There are no errors here.
----------------------------------------------------------------------
And now please take a look what happens during boot:
[...]
scsi0 : ioc0: LSISAS1078 C2, FwRev=01180400h, Ports=1, MaxQ=276, IRQ=20
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 0, sas_addr
0x500000e01f975022
Vendor: FUJITSU Model: MBB2147RC Rev: 0105
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 287277984 512-byte hdwr sectors (147086 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 287277984 5...
2016 Nov 05
3
Avago (LSI) SAS-3 controller, poor performance on CentOS 7
...ntroller Queue
Depth(10240)
mpt3sas_cm0: Scatter Gather Elements per IO(128)
mpt3sas_cm0: LSISAS3008: FWVersion(10.00.00.00), ChipRevision(0x02),
BiosVersion(08.25.00.00)
mpt3sas_cm0: Protocol=(
scsi0 : Fusion MPT SAS Host
mpt3sas_cm0: sending port enable !!
mpt3sas_cm0: host_add: handle(0x0001), sas_addr(0x500605b00aee5510), phys(8)
mpt3sas_cm0: port enable: SUCCESS
# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4] [raid1]
md0 : active raid1 sda2[0] sdb2[1]
999360 blocks super 1.0 [2/2] [UU]
md1 : active raid5 sdf3[6] sde3[4] sdd3[3] sdc3[2] sda3[0] sdb3[1]
19528458240 blo...
2011 Sep 26
4
Hard I/O lockup with EL6
...ments per IO(128)
mpt2sas0: LSISAS2008: FWVersion(04.00.00.00), ChipRevision(0x02),
BiosVersion(07.03.00.00)
mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot
Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x50030480004a14c0), phys(8)
mpt2sas0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access SEAGATE ST3300657SS 0006 PQ: 0 ANSI: 5
scsi 0:0:0:0: SSP: handle(0x0009), sas_addr(0x5000c50023bdb4b9),
device_name(0x00c50050b8b4bd23)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x50030480004a14c0), slo...
2010 Nov 16
0
Bug#603727: xen-hypervisor-4.0-amd64: i386 Dom0 crashes after doing some I/O on local storage (software Raid1 on SAS-drives with mpt2sas driver)
...ted: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1E)
[ 43.333035] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[ 43.345096] mpt2sas0: sending port enable !!
[ 44.980446] mpt2sas0: host_add: handle(0x0001), sas_addr(0x5842b2b0512d3300), phys(8)
[ 44.988461] mpt2sas0: failure at /build/buildd-linux-2.6_2.6.32-27-i386-c5N4Hf/linux-2.6-2.6.32/debian/build/source_i386_xen/drivers/scsi/mpt2sas/mpt2sas_scsih.c:3801/_scsih_add_device()!
[ 50.226533] mpt2sas0: port enable: SUCCESS
[ 50.231247] scsi 0:0:0:0: Dire...