Displaying 5 results from an estimated 5 matches for "sas3".
Did you mean:
sas
2017 Apr 18
2
Problems With Booting CentOS on Dell T7910
...east a dozen installs, everything
gets configured, and when I have the system reboot, I get 'No boot
device found press any key to reboot the machine'. In BIOS, I've enabled
AHCI, Legacy boot and modes, and enabled the SAS controller. The disks
are seen and written to. It uses a MPT SAS3 RAID controller, and I've
even specified a 'diskdrive' statement pointing to the known drivers for
the controller, and still nothing. This system is listed as compatible,
but I don't know. Any suggestions or help appreciated..
--
Paul E Virgo
Sr. System Administrator
Code 610....
2016 Nov 05
2
Avago (LSI) SAS-3 controller, poor performance on CentOS 7
On 11/05/2016 06:40 AM, Steven Tardy wrote:
> What firmware is/are on the cards?
In the dmesg output I included:
mpt3sas0: LSISAS3008: FWVersion(10.00.00.00), ChipRevision(0x02),
BiosVersion(08.25.00.00)
> The driver version difference between C6 and C7 could interact badly with old firmware.
I suspected that was the case, and tried running elrepo's "kmod-mpt3sas"
from their testing repo. C7 has version 0...
2016 Nov 05
0
Avago (LSI) SAS-3 controller, poor performance on CentOS 7
On 11/5/2016 12:08 PM, Gordon Messmer wrote:
> On 11/05/2016 06:40 AM, Steven Tardy wrote:
>> What firmware is/are on the cards?
>
> In the dmesg output I included:
> mpt3sas0: LSISAS3008: FWVersion(10.00.00.00), ChipRevision(0x02),
> BiosVersion(08.25.00.00)
>
>> The driver version difference between C6 and C7 could interact badly
>> with old firmware.
>
> I suspected that was the case, and tried running elrepo's
> "kmod-mpt3sas" from...
2017 Apr 19
0
Problems With Booting CentOS on Dell T7910
...talls,
> everything gets configured, and when I have the system reboot, I get
> 'No boot device found press any key to reboot the machine'. In BIOS,
> I've enabled AHCI, Legacy boot and modes, and enabled the SAS
> controller. The disks are seen and written to. It uses a MPT SAS3 RAID
> controller, and I've even specified a 'diskdrive' statement pointing
> to the known drivers for the controller, and still nothing. This
> system is listed as compatible, but I don't know. Any suggestions or
> help appreciated..
>
>
Hello,
How is the RAID co...
2011 Dec 02
14
LSI 3GB HBA SAS Errors (and other misc)
During the diagnostics of my SAN failure last week we thought we had seen a backplane failure due to high error counts with ''lsiutil''. However, even with a new backplane and ruling out failed cards (MPXIO or singular) or bad cables I''m still seeing my error count with LSIUTIL increment. I''ve got no disks attached to the array right now so I''ve also