Displaying 7 results from an estimated 7 matches for "rxflag".
Did you mean:
rwflag
2004 Jul 16
3
Echo problem update - POSSIBLE SOLUTION
...lled using FXO Groundstart protocol.
# "fxoks" : Channel(s) are signalled using FXO Koolstart protocol.
# "sf" : Channel(s) are signalled using in-band single freq tone.
# Syntax as follows:
# channel# =>
sf:<rxfreq>,<rxbw>,<rxflag>,<txfreq>,<txlevel>,<txflag>
# rxfreq is rx tone freq in hz, rxbw is rx notch (and
decode)
# bandwith in hz (typically 10.0), rxflag is either
'normal' or
# 'inverted', txfreq is tx tone freq in hz, txlevel is tx
tone
#...
2005 Jun 21
3
FXS
...: Channel(s) are signalled using FXO Groundstart protocol.
# "fxoks" : Channel(s) are signalled using FXO Koolstart protocol.
# "sf" : Channel(s) are signalled using in-band single freq tone.
# Syntax as follows:
# channel# => sf:<rxfreq>,<rxbw>,<rxflag>,<txfreq>,<txlevel>,<txflag>
# rxfreq is rx tone freq in hz, rxbw is rx notch (and decode)
# bandwith in hz (typically 10.0), rxflag is either 'normal' or
# 'inverted', txfreq is tx tone freq in hz, txlevel is tx tone
# level in dbm, txflag is either ...
2005 Jun 03
1
ztdummy errors on WBEL4
...alled using FXO Groundstart protocol.
# "fxoks" : Channel(s) are signalled using FXO Koolstart protocol.
# "sf" : Channel(s) are signalled using in-band single freq tone.
# Syntax as follows:
# channel# =>
sf:<rxfreq>,<rxbw>,<rxflag>,<txfreq>,<txlevel>,<txflag>
# rxfreq is rx tone freq in hz, rxbw is rx notch (and
decode)
# bandwith in hz (typically 10.0), rxflag is either
'normal' or
# 'inverted', txfreq is tx tone freq in hz, txlevel is tx
tone
#...
2005 Jun 22
4
FXS interfaces
...d using FXO Groundstart protocol.
# "fxoks" : Channel(s) are signalled using FXO Koolstart protocol.
# "sf" : Channel(s) are signalled using in-band single freq tone.
# Syntax as follows:
# channel# =>
sf:<rxfreq>,<rxbw>,<rxflag>,<txfreq>,<txlevel>,<txflag>
# rxfreq is rx tone freq in hz, rxbw is rx notch (and
decode)
# bandwith in hz (typically 10.0), rxflag is either
'normal' or
# 'inverted', txfreq is tx tone freq in hz, txlevel is tx
tone...
2005 Sep 05
0
Re: Asterisk-Users Digest, Vol 14, Issue 22
...t; : Channel(s) are signalled using FXO Groundstart protocol.
# "fxoks" : Channel(s) are signalled using FXO Koolstart protocol.
# "sf" : Channel(s) are signalled using in-band single freq tone.
# Syntax as follows:
# channel# => sf:<rxfreq>,<rxbw>,<rxflag>,<txfreq>,<txlevel>,<txflag>
# rxfreq is rx tone freq in hz, rxbw is rx notch (and decode)
# bandwith in hz (typically 10.0), rxflag is either 'normal' or
# 'inverted', txfreq is tx tone freq in hz, txlevel is tx tone
# level in dbm, txflag is either 'n...
2005 Oct 08
2
Configuring TDM400 in Australia
Hi, all
I have installed TDM400 with 1 FXS and 1 FXP ports.
Now I am goig through documentation on how to configure it.
It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do
I use?
Can someone send me sample zaptel.conf file for Australia? This will save me
some time and will be used as a working example.
Thanks,
Rudolf
2004 Nov 21
3
TDM400 FXO stops handling outgoing calls, but still accepts incoming?
...t; : Channel(s) are signalled using FXO Groundstart protocol.
# "fxoks" : Channel(s) are signalled using FXO Koolstart protocol.
# "sf" : Channel(s) are signalled using in-band single freq tone.
# Syntax as follows:
# channel# => sf:<rxfreq>,<rxbw>,<rxflag>,<txfreq>,<txlevel>,<txflag>
# rxfreq is rx tone freq in hz, rxbw is rx notch (and decode)
# bandwith in hz (typically 10.0), rxflag is either 'normal' or
# 'inverted', txfreq is tx tone freq in hz, txlevel is tx tone
# level in dbm, txflag is either 'n...