search for: ruzsinszky

Hi, I want to use nut-cgi from a centralized machine. There are two firewalls which run upsmon. upsmon connected to the real upsd which run two machines behind the firewall. So upsmon is using LAN for communicating to upsd. First problem: I can't connect to upsmon with upsstats.cgi because upsmon not listen on TCP port. Second problem: How can I check more upsd with upsmon? All upsd are

Hi, The error line is: *** STOP: 0x0000007B (0xF789AA94, 0xC0000034, 0x00000000, 0x00000000) Nothing more! (Of course there are some inrelevant text line about chkdsk, etc.) > Basically, what's required is the "STOP:" line + the image where it > fails (so, the line below). Image being likely to be NTOSKRNL.EXE > Nothing about NTOSKRNL.EXE on the blue screen! > >

Hi, I made a disk image with CloneZilla from the original physical machine. That image was restored on an iSCSI volume. It isn't booting. I got BSOD. I tried IDE, SATA, SCSI disk type without any success. I tried to using virtio driver and if I use my image+W2k3 install CD+virtio VFD the Windows repair console see the disk and I can use the repair console with my image but the windows not

Hi, Do you need the exact error message (the codes)? I don't want Virtio. I want to boot my image first. As I mentioned I can't use the mergeide.req on the physical machine but I can do anything with the image (if I don't het error messages from the virt-win-reg). I don't know if my restore to iSCSI volume was perfect. There wasn't any error messages and the imag is able to

On Aug 15, 2014, at 7:29 AM, Ruzsinszky Attila <ruzsinszky.attila at gmail.com> wrote: > Hi, > > Thanks for your answer! > >> You may want to check out the repeater mode of 'dummy-ups' - it is a >> proxy. You could have one instance of upsd which has several dummy-ups >> instances, each of w...

...dits may exacerbate the problem. I've never done this but wouldn't it make sense to stick to the more supported IDE drive emulation until you get it booted and thus remove possible variables of it not booting? Are you able to boot the image any other way? On Sat, Jul 11, 2015 at 8:28 AM, Ruzsinszky Attila < ruzsinszky.attila@gmail.com> wrote: > Hi, > > I made a disk image with CloneZilla from the original physical machine. > > That image was restored on an iSCSI volume. > It isn't booting. I got BSOD. > I tried IDE, SATA, SCSI disk type without any success. &gt...

On Sat, Jul 11, 2015 at 9:28 AM, Ruzsinszky Attila < ruzsinszky.attila@gmail.com> wrote: > Hi, > > Do you need the exact error message (the codes)? > > The error message "No system disk" means the disk is booting from a KVM perspective so no. > I don't want Virtio. I want to boot my image first. >...

Hi Pierre, On 11/07/2015 20:01, Ruzsinszky Attila wrote: > > The error line is: *** STOP: 0x0000007B (0xF789AA94, 0xC0000034, > > 0x00000000, 0x00000000) > > Perfect, this is what was expected. This should be easy to fix. > Good news! ;-) > Great, then, it opens possibilities. Let's try the following: > - -...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 11/07/2015 18:28, Ruzsinszky Attila wrote: > Do you need the exact error message (the codes)? Basically, what's required is the "STOP:" line + the image where it fails (so, the line below). Image being likely to be NTOSKRNL.EXE > I don't want Virtio. I want to boot my image first. As I mentioned >...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 07/13/2015 09:58 AM, Ruzsinszky Attila wrote: >> Here is the first problem. I can't mount sdi1! sdi1 not >> existent. >>> :-( >> >> What if you partprobe /dev/sdi? >> > Nothing. Empty output. When partprobe properly works (ie encounters no error), it doesn't print anything to c...

On 07/13/2015 03:25 PM, Ruzsinszky Attila wrote: > - - cd ControlSet001 >> - - cd Control >> - - cd CriticalDeviceDatabase >> - - Check you have the following keys: primary_ide_channel, >> secondary_ide_channel, pci#ven_8086&dev_7010, pci#ven_8086&dev_7111 >> keys. Some will be missing (other...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 25/07/2015 13:55, Ruzsinszky Attila wrote: > Hi Pierre, > > I got enough inspiration typing in the needed reg. keys. > > Here is a difference: What you wrote me: > > intelide >> { ErrorControl(REG_DWORD): 00000001 Group(REG_SZ): System Bus >> Extender Start(REG_DWORD): 00000000 Tag(REG_DWORD...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Regarding product activation, there's nothing I can do. You've to call Microsoft to re-activate your W2k3 licence. This is due to hardware change on virtualization. Regards, On 25/07/2015 20:54, Ruzsinszky Attila wrote: > Hi Pierre, > > I think the boot is working! ;-) I changed my image to IDE disk and > W2k3 started booting but wants Product Activation ... What can I do > with this? I can't login. I think it is a loop when I click on OK > button in the warning window. > &...

Hi, Is that possible? If I start in normal VGA mode I can see yellow ! next to the 2nd and 3rd QXL card and Win complains about can't start (Code 10). If I want to change the normal VGA resolution in a higher res (for example 800x600) I got black screen in virt-manager. I use SPICE protocol (for more screens). Any solution? W2k3 R2 Ent. Ed. SP2 TIA, Ruzsi

I use the video driver for optimal performance. You can download it here: http://www.spice-space.org/download.html Maybe installing this driver on the guest will resolve your issues. Van: libvirt-users-bounces@redhat.com [mailto:libvirt-users-bounces@redhat.com] Namens Ruzsinszky Attila Verzonden: woensdag 12 augustus 2015 11:31 Aan: libvirt-users@redhat.com Onderwerp: [libvirt-users] W2k3 with more than one QXL video card Hi, Is that possible? If I start in normal VGA mode I can see yellow ! next to the 2nd and 3rd QXL card and Win complains about can't start (Code 10...

Hi, Here is the XML file of the my VM: <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit SJ-SIMISPC or other application using the libvirt API. --> <domain type='kvm'> <name>SJ-SIMISPC</name>

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 11/07/2015 20:01, Ruzsinszky Attila wrote: > The error line is: *** STOP: 0x0000007B (0xF789AA94, 0xC0000034, > 0x00000000, 0x00000000) Perfect, this is what was expected. This should be easy to fix. >>> I don't want Virtio. I want to boot my image first. As I >>> mentioned I can't use the mer...

...hange for HDD, and thus, Windows cannot find its boot device any longer. Reading this KB might help: https://support.microsoft.com/en-us/kb/314082 Once you get proper booting with IDE, you can consider installing virtio drivers and switching to virtio. With my best regards, On 11/07/2015 17:56, Ruzsinszky Attila wrote: > Hi, > > Here is the XML file of the my VM: > > <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE > LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml > configuration should be made using: virsh edit SJ-SIMISPC or other > application usi...

Hi Vincent, I can access to the source physical machine but it is an almost 24h running machine. I heard about VMware P2V program. I've never used it, yet. I don't want to virtio. I want a booting W2k3. That's all. ;-) TIA, Ruzsi

Hi Pierre, I'm here now: root@amd1:/mnt1/WINDOWS/system32/config# chntpw -e SAM system security software chntpw version 0.99.6 110511 , (c) Petter N Hagen Hive <SAM> name (from header): <on1\WINDOWS\system32\config\sam> ROOT KEY at offset: 0x001020 * Subkey indexing type is: 666c <lf> File size 262144 [40000] bytes, containing 8 pages (+ 1 headerpage) Used for data: