search for: rtl8168b

I was trying to do some performance testing between using iSCSI on the host as a diskfile to a guest vs the VM guest using the iSCSI device directly. However, in the process of trying to establish a baseline performance figure, I started increasing the MTU settings on the PCI-express NICs with RTL8168B chips. First bottleneck was discovering the max MTU allowed on these is 7K instead of 9K but googling seems to indicate that the RTL8168B is only capable of 4K frames. I assumed 4K would still be better than nothing but unfortunately bumping up the MTU to anything else but 1.5K caused the file tr...

Hi, I have a new mainboard with a Realtek RTL8111B / RTL8168B NIC. In 5.1 are no driver integrated for this nic, but there is driver disk: http://wiki.centos.org/HardwareList/RealTekRTL8111b and http://wiki.centos.org/HardwareList/RealTekRTL8111b?action=AttachFile&do=get&target=r8168-2.6.18-53.el5-i686-x86_64.img.zip Can I integrate this driver do th...

Hi list, I'm planning to buy a mobo (z170-K) that has Realtek 8111GR (nic). I've tried to search on google about support on C7 but can't fine anything. There is a way to check if supported? Is the Realtek 8111GR supported or I must change mobo? Thanks in advance.

...l Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number xx-xx-xx-xx-xx-xx-xx-xx I researched well into the problem in various forums, but the driver you need the equipment is Realtek RTL8111B / RTL8168B NIC. Someone may orient me well what I have to do to install the driver for usb Offline so ?? if you can clear regards *Kevin Mauricio Benavides Castro* *Integrador de Systemas* *Cel: +505 84478854 * *Skype: kevin.olpc.support*

...never had a problem with built in support... Mike McCarthy On 06/03/2016 08:03 AM, Phil Manuel wrote: > You can get the Linux driver from > http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=5&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#RTL8111B/RTL8168B/RTL8111/RTL8168%3Cbr%3ERTL8111C/RTL8111CP/RTL8111D%28L%29%3Cbr%3ERTL8168C/RTL8111DP > if you can't find it under C7 > > Regards > > > On Fri, Jun 3, 2016 at 8:11 PM, Alessandro Baggi <alessandro.baggi at gmail.com >> wrote: >> Hi list, >> I'm planning...

Hi all, I'm seeing slow transfers to/from my samba server. I just tried to copy a 270MB file from a samba share to an XP machine. At first, the estimated time displayed as 141 minutes :( The odd thing is that if I then flood-ping from the server (in this case, I pinged my dsl router), the transfer completes in about 10 seconds. Hitting F5 repeatedly when browsing a share on the server

You can get the Linux driver from http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=5&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#RTL8111B/RTL8168B/RTL8111/RTL8168%3Cbr%3ERTL8111C/RTL8111CP/RTL8111D%28L%29%3Cbr%3ERTL8168C/RTL8111DP if you can't find it under C7 Regards On Fri, Jun 3, 2016 at 8:11 PM, Alessandro Baggi <alessandro.baggi at gmail.com > wrote: > Hi list, > I'm planning to buy a mobo (z170-K) that has Realte...

...ately all my mail and most network services are on the HVM domains, so the network is slow (missing DNS) and I''m missing quite a few facilities! So HELP please!!! - Joris === *Configuration* Hardware Intel Core 2 Duo E6750 2.66 GHz (clocked at 2.0 GHz) Intel PRO/1000 NIC (eth0) Realtek RTL8168b/8111b (eth1) Hypervisor: Gentoo 2007, Xen 3.2.1. 64-bit (XEN) Xen version 3.2.1 (root@joris2k.local) (gcc version 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)) Sun Jun 15 19:54:30 CEST 2008 Dom0: Gentoo 2007 Linux. 64-bit Linux version 2.6.20-xen-r6 (root@susa) (gcc version 3....

...d NIC it's eth0=NIC1 and eth1=NIC2 (as shown on the chassis). But with the third NIC it's most often that one that goes first. Here's a typical excerpt from messages. tigon/tg3 is the driver for the internal NICs which normally were on eth0 and eth1. Apr 25 19:00:59 c4 kernel: eth0: RTL8168b/8111b at 0xffffc20000022000, 00:21:27:c9:d1:f5, XID 38000000 IRQ 16 Apr 25 19:00:59 c4 kernel: eth1: Tigon3 [partno(BCM95721) rev 4201 PHY (5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:1e:c9:fe:fb:ab Apr 25 19:00:59 c4 kernel: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOc...

Hello list I have a shutdown problem. I have a machine with gigabyte GA-G33M-DS2R motherboard. Integrated network card is Realtek 8111B. I can not wake the computer after I shutdown it from FreeBSD. It is a dualboot system - windows xp and freebsd. If I shutdown the computer from windows - later I can wake it up with magic packet. Even if i shutdown the machine on the boot menu with the power

....3LK-NAPI loaded r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:04:00.0: setting latency timer to 64 r8169 0000:04:00.0: unknown MAC, using family default alloc irq_desc for 35 on node -1 alloc kstat_irqs on node -1 r8169 0000:04:00.0: irq 35 for MSI/MSI-X eth0: RTL8168b/8111b at 0xffffc900065e8000, 14:da:e9:b3:99:b9, XID 0c200000 IRQ 35 xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 xhci_hcd 0000:03:00.0: setting latency timer to 64 xhci_hcd 0000:03:00.0: xHCI Host Controller xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus numb...

...ower Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: no MSI. Back to INTx. eth0: RTL8168b/8111b at 0xffffc9001288c000, 00:23:cd:b2:56:65, XID 18000000 IRQ 17 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:04:00.0: setting latency timer to 64 r8169 0000:04:00.0: no MSI. Back to INTx. eth1: RTL8168c/8111c at...

...up the GSI :16 [ 4.195845] r8169 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.195934] r8169 0000:08:00.0: setting latency timer to 64 [ 4.196075] alloc irq_desc for 2245 on node -1 [ 4.196077] alloc kstat_irqs on node -1 [ 4.197001] r8169 0000:08:00.0: eth0: RTL8168b/8111b at 0xffffc900125fc000, 54:e6:fc:80:6b:b1, XID 18000000 IRQ 2245 [ 4.198006] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 4.198053] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbf07000 [ 4.202230] tg3.c:v3.116 (December 3, 2010) [ 4.202251] xen: registering gsi 17 tr...