search for: rports

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm trying to connect to ekiga.net through a client connected to my Asterisk server. For it I am being based on this [1] document. Next I put the configurations that I am using. /etc/asterisk/sip.conf: ; Outgoing to ekiga.net [ekiga] type=friend username=MyUser secret=MyPass host=ekiga.net canreinvite=no qualify=300 nat = yes stunaddr =

Hello List- I'm having a problem getting snom 190 phones to transfer a call to another local extension. Here is the scenario: A call (call1) comes in from the PSTN to (exten1). (via pri, if that matters) Another call (call2) comes in to (exten1). (call1) is put on hold while (call2) is answered. (call2) is then transferred to (exten2) using the "Xfer" button on the snom phone. This

Fedora: Linux abcde 2.6.11-1.1369_FC4 #1 Thu Jun 2 22:55:56 EDT 2005 i686 i686 i386 GNU/Linux Asterisk: 1.2.4 SIP Problem 1. Asterisk sends SIP messages to Softphone. 2. Softphone receives SIP messages and replys back. 3. Asterisk doesn't receive these replies and keeps on sending. Asterisk: Reliably Transmitting (no NAT) to 192.168.1.4:5060: OPTIONS sip:192.168.1.4 SIP/2.0 Via:

Hi all, Asterisk is great but I'm having issues with setting up realtime for our call center, which is needed for login integration with the rest of our applications (telephonists' web interface, etc.). I have reviewed a large number of previous posts to the mailing list and the voip-info wiki to no avail. Setup is as follows: Linux 2.6.23 (gentoo) / AMD Athlon(tm) 64 Processor 3000+ /

I'm running Asterisk 10.7.0 with three sip trunks to my call termination provider. For the most part everything works great. However, at apparently random times and usually about 20 mins or so into the call, the outbound audio stream dies. The call stays connected and the inbound audio works fine. The thing is, it happens on such an irregular basis (once or twice per day) that I can't get

Hi all my asterisk server, 2 sip client softphones are the same LAN asterisk ip address : 192.168.1.5 sip client 1 : 192.168.1.4 sip client 2 : 192.168.1.2 asterisk starts ok with sip setup the sip.conf [test] type=friend username=test secret=1000 host=dynamic context=cucku directmedia=yes directrtpsetup=yes [1000] type=friend username=1000 secret=1000 host=dynamic context=cucku

I don't think it's the snom, (the break key is set to "off") the "#" key is not being interpereted by the PBX as an attempt to initiate a transfer. Is this an error in my extensions.conf? Brian > >Message: 4 >Date: Wed, 15 Dec 2004 19:39:39 -0500 >From: Info <info@idatasys.com> >Subject: Re: [Asterisk-Users] Help with transferring a second call

Hi all, I am using asterisk1.2.14,realtime and I find there is a strange case in the receiver's display. I have a dial plan to route a call to the destination. I haven't set the callerid(num) for the caller. In the receive ends, it's display shows "asterisk" when I make a call to the receiver. I wonder why "asterisk" shows in the display as I haven't set

Dan Cropp wrote: > I had my screenshots flipped. Is there a way to make sure the Contact field is NOT included in the ACK response to the OK (for the Answer)? > > PJSIP is including the Contact for the ACK response to the OK. > Contact:<sip:1234 at xxx.xxx.xx.xxx:5060> > There is no configuration option to configure this behavior. What is the full SIP signaling? -- Joshua

Hi list, I have a fresh install of Asterisk 12.0.0 and I'm going to use it only as a client. I'm trying to SIP REGISTER with a remote SIP provider. The situation is that Asterisk is running in a VMware VM with a RFC IP address (192.168.1.2). The provider of the VM performs static NAT from the RFC IP address to a dedicated public IP address, however, they are rewriting ports at will.

OK, here goes my next problem. I have puchased a DID which I can connect to via SIP I have been given the following details: Username: uka1xxxxxx Password: 1000xxxxxx Server: brxxxx.net:5160 My equipment is Asterisk CVS HEAD on Red Hat EL 3.0 (NO NAT) The other end is a Cisco AS5300 (NO NAT) I can register with the Cisco with no problem. When I dial the DID it sends the call to my asterisk

I am not sure what you mean by the ful SIP signaling? Here is the trace for the sip.conf which works successfully. Below that, I will include the trace for the pjsip.conf which it seems Vitelity isn't accepting the ACK in response to the OK ---- SIP --- <--- Transmitting SIP request (1004 bytes) to UDP:64.2.142.93:5060 ---> INVITE sip:8005555555 at 64.2.142.93 SIP/2.0 Via: SIP/2.0/UDP

On Sun, Mar 15, 2015 at 5:56 PM, Sonny Rajagopalan <sonny.rajagopalan at gmail.com> wrote: > George, > > I have the detailed log below. (Resending after trimming the email to 40KB.) > > The sequence below just repeats ad-nauseam. Is this a SIP trunk issue? > > Thanks! > I don't see anything obvious. The registration works though, right? You might want to compare

Hi, I've been trying to fix NOTIFY replies (specifically keep-alives) in 1.4.42 (I can't upgrade to 1.8.x at the moment for various reasons). I've noticed for user agents that have a VIA header with a different port than the port the NOTIFY was sent from, the NOTIFY reply will always be sent back to that port, which is incorrect. (Sonicwalls and other routers love to do this, even

hi, let me explain in detail, what i have configured and what is happening now: 1st router w724v (Deutsche Telekom AG): - port forwarding, everything to destination port 51000-55999 to device with ip 192.168.2.50 (interface of 2nd router) 2nd router Bintec RS353j): - configured NAT, everything to port 51000-55999 to device 192.168.3.99 (same ports) other direction is totally open. I

Hi, I have a client using Mitel 5212 phones in SIP mode with a 1.4.21.1 Asterisk server (and a couple of previous 1.4 versions). They're mostly happy with the combination except for this one issue. For incoming calls only, either originating from other local SIP phones or from a PRI, calls won't get bridged (remote party get's hung up) if the call is answer too quickly on the

I have setup a trunk on Asterisk 11.7 to an Avaya Session Manager. Every time I try to send a call over it, the call gets rejected. Here is the sip debug trace. Could anyone tell me what may be going wrong? nxdasterisk-2*CLI> [Apr 23 08:20:59] WARNING[19047]: pbx_spool.c:309 safe_append: Unable to set utime on /var/spool/asterisk/outgoing/scott.call: Operation not permitted Audio is at 18380

I have the following scenario: PSTN gateway (202.180.nnn.nnn) -> OpenSER 1.0.1 (147.202.nnn.nnn) -> Asterisk 1.2.16 (203.89.nnn.nnn) When an incoming call is received, often (but not always) Asterisk repeatedly sends a SIP 200 OK message and eventually hangs up the call. sip.conf [general] port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all

Hi All, Just added a Siemens DECT SIP/PSTN S450 phone to login to my A*k server, and I see "Got SIP response 405 "Method Not Allowed" back from 192.168.3.64" but the phone seems to work ok. Any ideas where it falls over in the SIP protocol? I've included this in the debug below. ubiphone*CLI> <-- SIP read from 192.168.3.64:5060: --- (0 headers 0 lines) Nat

I have a asterisk server with 6 Cisco ATA connected in SIP. My problem is that one of them is dropping calls an I can't figure out what is the problem; I had made a SIP DEBUG PEER 1088 that is the peer with the problem. Any help will be appreciate Thanks Erick Weber VoIP*CLI> sip debug peer 1088 SIP Debugging Enabled for IP: 201.133.170.82:5060 Peer RTP is at port 192.168.1.69:0 Peer