search for: routeur

Hi I try to connect my asterisk with a Siemens Hicom pbx. I have a PCI cologne Chip card wich support NT mode. I have compiled mISDN driver, and I use chn_misdn from debian package. The card wotk fine in TE mode but mot in NT mode. for informations : routeur*CLI> misdn show stacks BEGIN STACK_LIST: * Stack Addr: Uid 40200001 Port 1 Type NT Prot. PMP Link DOWN --> bchan: addr 0 channel 0 pid -1 cr ffffffff tone NOTONE --> bchan: addr 0 channel 0 pid -1 cr ffffffff tone NOTONE routeur*CLI> misdn show channels Chan List: (nil) routeur*CL...

Hello again I asked a question about routing a week or so back and have progressed somewhat since then. I have managed to progress somewhat with proxy arp but not with routing. I will repeat my setup: LAN is on eth0 and uses masq and 192.168.1.0/24 NET is on eth1 and default routes are on ISP routeur xxx.xxx.79.126 and xxx.xxx.242.126 DMZ is on eth2 and consists of 2 complete class C blocks xxx.xxx.242.0/24 and xxx.xxx.79.0/24 except for 5 addresses which are outside the firewall As soon as I create the route to the DMZ on the firewall all traffic from the LAN to the NET stops completely on...

Hi i want see if my QoS are good because i am not very sure ... the VoIP quality are not very good when i download. I have on my Linux routeur/Firewall Asterisk .. and i have into my config : ================================================ tcdevices: eth0 2000kbit 2000kbit tcclasses: eth0 1 100kbit 180kbit 1 tos=0x68/0xfc,tos=0xb8/0xfc eth0 2 full/4 full 2 tcp-ack,tos-minimize-delay eth0 3...

Hello I''ve noticed that Lustre network error, especially LND errors, are considered as maskable errors. That means that on a production node, where debug mask is 0, those specific errors won''t be displayed if they happened. Does that mean that they are harmless? Do upper-layers resend their RPC/packet if LNDs report an error? When, in my case, o2iblnd says something like

Hello I''ve noticed that Lustre network error, especially LND errors, are considered as maskable errors. That means that on a production node, where debug mask is 0, those specific errors won''t be displayed if they happened. Does that mean that they are harmless? Do upper-layers resend their RPC/packet if LNDs report an error? When, in my case, o2iblnd says something like

...? POWER POINT INSTALLATION : ? WINDOWS XP ? WINDOWS 7 ? WINDOWS VISTA ? WINDOWS 2003 SERVER CONFIGURATION : ? Configuration : DHCP, DNS, IIS, SOUS 2003 SERVER ? La gestion des groupe, des compt?s utilisateurs et ordinateur, et des imprimantes ? Configuration des ?quipement cisco, routeur et switch S?curit? ? S?curit? et diagnostic des r?seaux informatique LA NGUES : ? Fran?ais : lu, ?crit, et parl? ? Anglais : notion de base ? Arabe : lu, ?crit, et parl? CENTRE D?INTERETS : ? Voyage ? Lecture ? navigation

Hi All, I''ve been playing with QOS for a short while now and have worked out how to do what I want using HTB. Great queuing discipline btw. My problem is the tc filters I want to setup aren''t working because iptables is getting to the packets first and mangling the src address. The iptables script I am using is MonMotha''s Firewall 2.3.8 and it includes lots of nice

Bonjour je n?arrive pas ? configurer convenablement NUT pour qu?il m?adresse des SMS en cas de coupure de courant. C?est important pour moi car dans ma maison les coupures sont tr?s fr?quentes. Voici ma configuration : ****************************************************************** 1/ dans /etc/nut/upsmon.conf MONITOR eaton at localhost 1 admin motdepasse master MINSUPPLIES 1 SHUTDOWNCMD