search for: roboto

I've been looking around for an example of a method of reading back a caller ID value, but I haven't found anything that doesn't use Festival. I'd rather not resort to the Mr. Roboto voice if I can avoid it. Playback of the numbers one at a time is perfectly fine, so I'd like to use the default female Asterisk voice (the sound files are in place on my server). Does anyone have an example of how to accomplish this? Thanks in advance! -------------- next part --------------...

My compliments on the release of syslinux-5.0 and happy holidays to the entire Syslinux team.? I have a longer message in me.? Lots of curiousity about the direction of the project, but that will have to wait until I finish my first 5.0 project (*not* my first Syslinux project), which just happens to touch past problems: drive enumeration. This particular effort is on a USB flash drive, with two

...5155515509,7) -- Executing [15155515509 at robocop2:7] WaitForSilence("SIP/gafachi-081c81a8", "4000|2") in new stack -- Waiting 2 time(s) for 4000 ms silence with 0 timeout -- Executing [15155515509 at robocop2:8] Playback("SIP/gafachi-081c81a8", "mr-roboto-short") in new stack -- <SIP/gafachi-081c81a8> Playing 'mr-roboto-short' (language 'en') == Spawn extension (robocop2, 15155515509, 8) exited non-zero on 'SIP/gafachi-081c81a8' [Mar 19 23:45:42] NOTICE[12477]: pbx_spool.c:351 attempt_thread: Call completed...

I was doing a laptop repair job today and needed to boot from a USB thumb drive, in order to free up the CD/DVD burner. Fortunately, the laptop to be repaired permitted one to boot from a USB thumb drive. However, there are still PCs out there that can't boot from a thumb drive (I have two), so I was wondering if it's pos to use the CHAIN module to boot from a thumb drive ? I looked at

Just tried the latest release and found a minor bug. Have a UFD w/ SYSLINUX, which boots a simple .BSS image no problem. Launching exactly the same image on a ISOLINUX disc fails w/ the following error msg: Invalid image type for this media That's it for this msg. Later....Jet -- Powered by Outblaze

...72 ms) Am I doing anything wrong or do I hit a bug? Config of [private*]: | # grep -v \^\; /etc/asterisk/iax.conf | [general] | bindaddr=192.168.11.1 | bandwidth=low | disallow=g723.1 ; Hm... Proprietary, don't use it... | disallow=lpc10 ; Icky sound quality... Mr. Roboto. | allow=gsm ; Always allow GSM, it's cool :) | register => iaxtest:iax@62.75.137.248 | tos=lowdelay | [guest] | type=user | context=voip Config of [public*]: | [general] | bindaddr=62.75.137.248 | bandwidth=low | disallow=g723.1 ; Hm... Proprietary, don'...

...nce the problem is limited to external calls, I take it that the problem relates to IAX2 and not some other part of Asterisk? Here's a sanitised version of iax.conf: [general] port=5036 bandwidth=low disallow=all allow=alaw allow=gsm disallow=lpc10 ; Icky sound quality... Mr. Roboto. jitterbuffer=no register => USERNAME:PASSWORD@voip-gw1.magrathea-telecom.co.uk tos=lowdelay [magrathea] type=friend trunk=yes host=dynamic auth=plaintext username=USERNAME secret=PASSWORD context=inbound-magrathea notransfer=yes Does anybody have any suggestions as to how to clear this odd...

...on repeating). I went to google and searched on "asterisk Remote Unix connection disconnected" but cannot find anything I can recognize. I checked my iax.conf and I don't have anything with an IP defined: [general] port=5036 bandwidth=low disallow=lpc10 ; Icky sound quality... Mr. Roboto. allow=gsm ; Always allow GSM jitterbuffer=yes dropcount=6 tos=lowdelay [guest01] type=user context=default auth=md5,cleartext secret=xxxxxxxxx; [target] type=user context=default deny=0.0.0.0/0.0.0.0 ------------------ end of file --------------------------- has anybody faced this problem? is th...

I'm trying Asterisk 10.0 (as 8.x is not passing PSTN CallerID) and Asterisk 10.0 is no better. I'm still getting: WARNING[12295]: chan_sip.c:14446 check_auth: username mismatch, have <11>, digest has <pstn-1270> NOTICE[12295]: chan_sip.c:22769 handle_request_invite: Failed to authenticate device "KMIEC Z" <sip:7804715665 at 10.0.0.110>;tag=1c1222950155 Anybody

This isn't an esp urgent issue, but I'd like to use a certain RAM diagnostic (Doc Mem) which I've already posted a note about a couple of months ago. Simply won't work booting the floppy disk image via MEMDISK. In the interim, I've tried to resolve this by changing things on my side. I'm pretty sure it's a XMS incompatibility, as it fails differently depending on

...y SRPM at http://www.bigu.org/SRPMS/ Sound is fine. Doesn't seem to pick up anything from the microphone, though. ** kphone: Check out my SRPM at http://www.bigu.org/SRPMS/ Sound is fine. Picks up sound from the microphone, but the echo-test repeats it back after passing it through a Mr-Roboto filter. ** tkPhone: Sound is fine. Doesn't seem to be reading from the mic, no traffic going over the network after the 'demo-echotest' recording finishes. The following errors are continuously repeated from tkPhone: sent 63426 (3),received 30228 (3);read 615040 write 293120 nee...

...lso fine tune codecs here using "allow" and "disallow" clauses ; with specific codecs. Use "all" to represent all formats. ; ;allow=all ; same as bandwidth=high ;disallow=g723.1 ; Hm... Proprietary, don't use it... disallow=lpc10 ; Icky sound quality... Mr. Roboto. ;allow=gsm ; Always allow GSM, it's cool :) ; ;jitterbuffer=no ;dropcount=3 ;maxjitterbuffer=500 ;maxexccessbuffer=100 ; ;trunkfreq=20 ; How frequently to send trunk msgs (in ms) ; ; Finally, you can set values for your TOS bits to help improve ; performance. Valid values are: ; lowdel...

...don't have the trunk setup right. also I have posed the output of my full log of the machine with the zap interface, the other is using ztdummy. IAX.conf on machine 1: [general] port=5036 ;iaxcompat=yes bandwidth=low disallow=ilbc disallow=lpc10 ; Icky sound quality... Mr. Roboto. allow=ulaw ;allow=gsm ; Always allow GSM, it's cool :) jitterbuffer=no trunkfreq=20 ;dropcount=3 ;maxjitterbuffer=500 ;maxexcessbuffer=100 ; tos=lowdelay register => lachnet@woodlane.lach.net register => lachnet@10.1.1.158 ; [woodlane] allow=ulaw ;allow=gsm type=frie...

Is there a practical reason that the NTLDR clause of the CHAIN module isn't operable under ISOLINUX ? The reason for my question is that I like the SYSLINUX suite over the alternatives, that is GRUB and BCDW, however these pkgs all can chainload (just about anything) from an ISO. That is, they can handle .BSS files and the various NT/XP boot files, like SETUPLDR.BIN, etc. I make/update

Subject: Re: [Asterisk-Users] IAX Bandwidth Question Hi, I have changed the codec to lpc10 (I see what they mean by Mr. Roboto!!) and the ping times generally dont go over 300ms. It seems very odd that GSM saturates the link. I would love to give g.723.1 a try but have no idea where to get the proprietary codec... can anyone help? Thanks Jay > ----- Original Message ----- > From: "WipeOut ." <wip...

How do I get Gnophone to register to my Asterisk server? I have set up iax. conf as follows: [tim] type=friend ;username=tstornes host=dynamic ;defaultip=207.194.60.56 secret=1111 context=from-iax callerid => "Tim" <5000> auth=plaintext qualify=10 permit=0.0.0.0/0.0.0.0 and extensions.conf includes a section in the context from-iax: exten => 5000,1,Dial(IAX/tim/s|100|r)

...y SRPM at http://www.bigu.org/SRPMS/ Sound is fine. Doesn't seem to pick up anything from the microphone, though. ** kphone: Check out my SRPM at http://www.bigu.org/SRPMS/ Sound is fine. Picks up sound from the microphone, but the echo-test repeats it back after passing it through a Mr-Roboto filter. ** tkPhone: Sound is fine. Doesn't seem to be reading from the mic, no traffic going over the network after the 'demo-echotest' recording finishes. The following errors are continuously repeated from tkPhone: sent 63426 (3),received 30228 (3);read 615040 write 293120 nee...

Hi, What would you say that the best compression format is for voice recordings on Asterisk? The tradeoff being the file's size. I like GSM because of the small files size but the quality isn't great. What are people finding as a good setting for GSM? Thanks, Michael

I am about to connect to a new provider who requires 20ms payload sizes in g729a. Is this configurable on asterisk? Is 20ms the default? Cheers, j

I have 1 * box having x100p installed and the other has no zaptel card at all. both of the * box has compiled in ztdummy module and both have been activated by modprobe ztdummy. When using trunk to connect the 2 *box. The one without zaptel card complaint about unable to accept trunked packet: no matching peer. On the one has zaptel card I have tried to remove the ztdummy module and connect