search for: rmcard205

Build from source, and done . . . wasting your time looking for a less out of date RPM is pointless. . . RPM, .deb, etc are almost always downrev. . . - Tim On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote: >Hey all, > > I recently got an RMCARD205 for my Cyber UPS.... > >if I use no MIBS line in the config file, I get this: > > >> Network UPS Tools - UPS driver controller 2.6.5 >> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) >> No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'! >&...

...appreciate all your help and would be thankful for any hint or tipp. Are there any certain drivers I should test? I need to get this battery working... Thanks so much for all your efforts! Cheers, Chris OS Name and Version: FreeNAS 11.0U4, no custom modifications Cyberpower PR2200 Firmware: 4.520 RMCARD205 Firmware: 1.0.9 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20171110/1729a344/attachment.html>

I'm looking at switching from an APC UPS to a different brand after having had my third SU3000RM in a row blow up power transistors. I'm looking at the Cyperpower PR3000LCDRTXL2U. I see the PR3000E and the PR6000LCDRTXL5U listed as supported, but not the PR3000LCDRTXL2U. Howeverit seems likely that if the PR6000LCDRTXL5U is supported, the PR3000LCDRTXL2U ought to work as well. I've

Hey all, I recently got an RMCARD205 for my Cyber UPS.... if I use no MIBS line in the config file, I get this: > Network UPS Tools - UPS driver controller 2.6.5 > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'! > Please report it to NUT deve...

...ical benefit to getting the SNMP network card for it > unless I plan to monitor it via SNMP, or can any monitoring and > management I need to do be done perfectly well via serial, as on my APCs? For CyberPower, a SNMP card might be your best bet. I don't have specific experience with the RMCARD205 that they recommend on their website, but most vendors seem to be able to get SNMP right. If nothing else, SNMP card firmware is usually upgradeable. If you are mainly concerned about shutdowns when the UPS signals a low battery alert, then there is a good chance that the PR3000LCD* models are all...

...looking for a less >>out of date RPM is pointless. . . RPM, .deb, etc are almost always >>downrev. . . >> >>- Tim >> >>On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote: >>>Hey all, >>> >>> I recently got an RMCARD205 for my Cyber UPS.... >>> >>>if I use no MIBS line in the config file, I get this: >>> >>> >>>> Network UPS Tools - UPS driver controller 2.6.5 >>>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) >>>> No matching MIB f...

...o-shutdown-your-servers-in-case-of-power-failure-ups-nut-co-34d22a08e92 This is on Raspbian 10, running on a Raspberry Pi. NUT is version 2.7.4 and was installed from the normal Debian repositories. The UPSes we have are a - Eaton 9PX 1000i RT 2U with Network-MS - CyberPower OLS1500E with RMCARD205 When I run upsdrvctl start, I get an MIB/OID error: $ sudo upsdrvctl start > Network UPS Tools - UPS driver controller 2.7.4 > Network UPS Tools - Generic SNMP UPS driver 0.97 (2.7.4) > Detected Eaton 9PX on host 10.7.10.7 (mib: mge 0.5) > Network UPS Tools - Generic SNMP UPS driver 0...

...ce, and done . . . wasting your time looking for a less >out of date RPM is pointless. . . RPM, .deb, etc are almost always >downrev. . . > >- Tim > >On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote: >>Hey all, >> >> I recently got an RMCARD205 for my Cyber UPS.... >> >>if I use no MIBS line in the config file, I get this: >> >> >>> Network UPS Tools - UPS driver controller 2.6.5 >>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) >>> No matching MIB found for sysOID '.1.3.6....

Hey there, I got a new UPS (CyberPower PR1500LCDRTXL2Ua) and found the serial drivers don't quite work... So I decided to jump in and make changes to the driver that would hopefully make it happier. I have it working (I really only changed powerp-txt.c) but still have a couple questions... Charles said I should mention them here to talk to anyone interest but specifically Arjen (one of

...erpower's software before switching to NUT. Some older UPSes (and likely not even from Cyberpower) did not deal well with switching between ports, and required a power cycle to switch. > OS Name and Version: FreeNAS 11.0U4, no custom modifications > Cyberpower PR2200 Firmware: 4.520 > RMCARD205 Firmware: 1.0.9 for reference, I think this version of FreeNAS includes NUT 2.7.4. If this works with a different driver, would you please send a snapshot of the information you get from upsc, upscmd and upsrw as mentioned here? http://networkupstools.org/stable-hcl.html#footnotes Thanks!

Hello all, Thank you in advance for a great FOSS project. Also, thank you for reading my question. I have a CyberPower OR1500LCDRTXL2U with an RMCARD205. There are a handful of devices plugged into the UPS. I received a message today saying to send upsc output to NUT developers after this message: "No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'" root at delta:/etc/nut# systemctl status nut-driver.service Feb 15 17:4...

...rpower's software before switching to NUT. Some older UPSes (and likely not even from Cyberpower) did not deal well with switching between ports, and required a power cycle to switch. > OS Name and Version: FreeNAS 11.0U4, no custom modifications > Cyberpower PR2200 Firmware: 4.520 > RMCARD205 Firmware: 1.0.9 for reference, I think this version of FreeNAS includes NUT 2.7.4. If this works with a different driver, would you please send a snapshot of the information you get from upsc, upscmd and upsrw as mentioned here? http://networkupstools.org/stable-hcl.html#footnotes Thanks!