search for: rjbod1

...fact that these internal drives are cabled up in a single-path configuration). If anything, this does confirm that multipath is enabled in mpt_sas.conf via the mpxio-disable="no" directive (internal HBA''s are LSI SAS, 2x 9201-16i and 1x 9211-8i). The JBOD is a SuperMicro 847E26-RJBOD1, with the front backplane daisy-chained to the rear backplane (both expanders). Each of the two expander chains is connected to one port of an LSI SAS 9200-8e HBA. So far, all this hardware has appeared as working for others and well-supported, and this 9200-8e is running the -IT firmware, versio...

Dear all Sorry if it''s kind of off-topic for the list but after talking to lots of vendors I''m running out of ideas... We are looking for JBOD systems which (1) hold 20+ 3.3" SATA drives (2) are rack mountable (3) have all the nive hot-swap stuff (4) allow 2 hosts to connect via SAS (4+ lines per host) and see all available drives as disks, no RAID volume. In a

I have 15x SAS drives in a Dell MD1000 enclosure, attached to an LSI 9200-16e. This has been working well. The system is boothing off of internal drives, on a Dell SAS 6ir. I just tried to add a second storage enclosure, with 15 more SAS drives, and I got a lockup during Loading Kernel. I got the same results, whether I daisy chained the enclosures, or plugged them both directly into the LSI

Dear All, It may be this not the correct mailing list, but I''m having a ZFS issue when a disk is failing. The system is a supermicro motherboard X8DTH-6F in a 4U chassis (SC847E1-R1400LPB) and an external SAS2 JBOD (SC847E16-RJBOD1). It makes a system with a total of 4 backplanes (2x SAS + 2x SAS2) each of them connected to a 4 different HBA (2x LSI 3081E-R (1068 chip) + 2x LSI SAS9200-8e (2008 chip)). This system is has a total of 81 disk (2x SAS (SEAGATE ST3146356SS) + 34 SATA3 (Hitachi HDS722020ALA330) + 45 SATA6 (Hitac...