search for: rine

Hi, I have an asterisk installation that has been happily working in production for some time (E100P and UK BT ISDN30). Recently I upgraded to HEAD-07/29/04. Now, incoming callers don't hear ringing while calling in. As far as I can tell, my config files haven't changed from what was working before. Can anyone please help before my boss shoots me? JC zaptel.conf

Dear all I have confusion how to asterisk genrate tone and what ringing code use default 180 or 183 i have setup asterisk with mediant 2000 with avaya [asterisk]-----[mediant 2000]--------[Avaya] when i call from avaya side to ---> asterisk i don't got ringback Sound so how to asterisk genrate tone for calling party is there any soution and what is the problem of

Dear all I have TDM808B 8 port FXO it is configure perfectly but i got some problem of incomming phone Hangup and callerid display problem i am going to explain you the issue i have install asterisk 1.4 and i have 100 of SIP phone now everything is fine but problem is when i incoming call on FXO and dial sip extention SIP phone is rining but when i disconnect my incoming

Dear all I have asterisk with TDM808B FXO port with i call in asterisk and i promt IVR then user dial extention for user then my SIP phone rining but i disconnect or hangup my mobile phone but still SIP phone rining and stop rining after timeout is there any PSTN problme or FXO signalling problme i have configuraed singalling=fxs_ks ----PGP Signature-- Satish

I am running * with a Junghanns quadbri that should allow us to integrate our ISDN house telephone system with VOIP. Preferably I would like to run a setup, so that our internal ISDN phones on an S bus are not aware that * is sitting in between. With the configuration below I run into the following problems: 1. On outbound calls, I get the normal rining call progress tone althought the

Well I dont want it to operate as a group. I understand that it is *8 on most PBX systems but I would like it to work as dialing *8+extension-thats-ringing to have it go over to my extension. I am having a lot of trouble finding more information from the wiki and google. Thanks! -James -----Original Message----- From: asterisk-users-bounces@lists.digium.com

I've setup SPA-3000 and when the calls come through my phone is rining almost instantly but the [demo] doesn't answer till after about 13 seconds. So I have about 13 seconds delay and I don't know what setting is causing it; here is a part of my settings from extension.conf. [from_pstn] exten => 1000,1,Goto(demo,s,1) [demo] exten => s,1,Answer ; Answer the

Hi, Here is the configuration of the server that I currently have extension 100 (SIP) =>(SIP)asterisk server 1.8.18(IAX trunk) <===>(IAX trunk)asterisk server 1.4.32(SIP) ===> SIP Providers The issue is while dialing out from extension 100(sip) if the providers sends back 180 Rining the SIP extension(100) won't hear the ringback tone, where as if the providers send 183

Dear all I am going to setup Asterisk Call center solution and i have setup my queue and agent i have 2 SNOM ip phone but when i call to queue my agent phone is rining without musicnhold or when both phone is busy then i call to queue its directy hangup without musicnhole means my call not goes in to queue what is the problem my queue.conf [root at pbx asterisk]# cat

i call to my tollfree number buy my CLI send the next error: Aug 14 08:15:22 WARNING[25931]: format_wav.c:169 check_header: Unexpected freqency 22050 Aug 14 08:15:22 WARNING[25931]: file.c:441 ast_filehelper: Unable to open file on /var/lib/asterisk/sounds/procall3.wav Aug 14 08:15:22 WARNING[25931]: file.c:828 ast_streamfile: Unable to open procall3 (format ulaw): No such file or directory Aug

Hello, I ordered the Devel lite kit, and installed it. I am just trying to get the FXO port to work, and am having trouble. To load the card I do the following. modprobe wcfxs modprobe wcfxo ztcfg -vv asterisk -vc My /var/log/asterisk/messages show Nov 3 11:03:39 WARNING[3317]: zt hook failed: Device or resource busy Here is my /etc/zaptel.conf fxoks=1 fxsks=4 loadzone=us defaultzone=us

Hi all, I'm researching IP phones for a new office setup. We will need 30 phones. I have read the wiki and the polycom site for the phones, but I still had some questions about real world experience with these phones. -According to the documentation, the 500 series ( and 600, according to a polycom rep ) have built in hubs. Has anybody noticed performance issues in this setup, when

I have a caller screen queue setup. Basically a caller calls in, goes through a IVR, and before that caller is put into the queue, they get a sub ran on them first asking for them to say there name. That gets saved and they are entered into the queue using Queue(mainqueue,,,,300). In the queues.conf i have a list of members these are local/extension at external-default, there are two

I have a TDM400P with 2 FXO cards and I'm using Asterisk@Home 2.8 I noticed that when I place a call to the analog lines from outside, Asterisk takes a while to actually ring the extension the call is being sen to. I've been doing some tests, calling from my cellphone and here is what I see... - After the first ring on my cell, Asterisk logs to the CLI that is has an incoming call -

Hello, I'm using a dial command to make several phones ring. I use this format : Dial(SIP/4029&SIP/4030,15,tTr) As soon as one of the phone is picked up, all the others should just stop rining. But the fact is that they continue to ring for several seconds (4-5s), and this is quite annoying as all phones are in the same room. Phones are Siemens Gigaset C450IP and Linksys SPA921. Do you

Dear all I have asterisk setup now what happend when i dial 4 digit number my asterisk wait for few digit why when i press # key it is dialing fast but without # wait for few number is there any configuration for dialplan I have setup asterisk with avaya system i have 5 avaya system on 5 location i use 16XX,22XX,33XX,44XX,20XX to reach avaya extentions but when

I'm pretty much a newbie to this but still think I've been around the various help pages, voip-info.org etc to be fairly sure I'm not missing something here so your help is appreciated! I have a box running RedHat9 at home with the latest CVS of Asterisk and all works fine. At the office, we installed Gentoo linux on a machine, downloaded the latest CVS of Asterisk, set it up. All

is it possible to do with asterisk something like this how ? maybe some copy of extensions and some other file ..pls. call to asterisk server -> user 100 is busy -> recorded msg say "all lines are busy , pls wait" ,"you are second caller in 'queue', pls wait" -> caller is on hold till user 100 busy then ring user 100 (ext100) another call to asterisk

Hi, I recently encountered a weired situation where my budgetone stopped working. My network is like this: Asterisk on Public IP ----------- ADSL NAT Router ----- GS01, GS02, GS03 on Internal IP We have an Asterisk server running with a public IP address, which serves as the master PBX. On a remote site, we have 3 Budgetones all having internal IP addresses assigned by the ADSL NAT router. The

Hi all, i have just finished my installation of wine as normal user (see below). Notepad is running fine, so i decided to run something more fun, starcraft. The installation program works, even with sound and all, exept when i decide to run the previews. The previews run rine, but whithout sound. When i return to the installation program the sound is gone. But anyway, it does it's yob, i.e. it installes starcraft. When i start the game i get the following error: WineDbg starting on pid f Loaded debug information from ELF 'wine' ((nil)) No debug informatio...