search for: resync

...DEBUG: Bitrate: 128 kbit/s Padding: 0 Mode: j-stereo DEBUG: Ext: 0 Mode_Ext: 2 Copyright: 0 Original: 1 DEBUG: Error Protection: 0 Emphasis: 0 Stereo: 2 Playing /home/audiotron/music/Beck/Odelay/09-Minus.mp3 DEBUG: Initially delaying metadata update... bitstream problem: resyncing... bitstream problem: resyncing... bitstream problem: resyncing... bitstream problem: resyncing... bitstream problem: resyncing... bitstream problem: resyncing... bitstream problem: resyncing... bitstream problem: resyncing... bitstream problem: resyncing... bitstream problem: resyncing... bitst...

I have configured 2x 500G sata HDD as Software RAID1 with three partitions md0,md1 and md2 with md2 as 400+ gigs Now it is almost 36 hours the status is cat /proc/mdstat Personalities : [raid1] md0 : active raid1 hdb1[1] hda1[0] 104320 blocks [2/2] [UU] resync=DELAYED md1 : active raid1 hdb2[1] hda2[0] 4096448 blocks [2/2] [UU] resync=DELAYED md2 : active raid1 hdb3[1] hda3[0] 484182912 blocks [2/2] [UU] [==========>..........] resync = 51.8% (251168768/484182912) finish=1975. 7min speed=1964K/sec unused devices: <none...

...fff cx88[0]: cmds: iq wr ptr : 0xffffffff cx88[0]: cmds: iq rd ptr : 0xffffffff cx88[0]: cmds: cdt current : 0xffffffff cx88[0]: cmds: pci target : 0xffffffff cx88[0]: cmds: line / byte : 0xffffffff cx88[0]: risc0: 0xffffffff [ INVALID sol eol irq2 irq1 23 22 21 20 19 18 cnt1 cnt0 resync 14 13 12 count=4095 ] cx88[0]: risc1: 0xffffffff [ INVALID sol eol irq2 irq1 23 22 21 20 19 18 cnt1 cnt0 resync 14 13 12 count=4095 ] cx88[0]: risc2: 0xffffffff [ INVALID sol eol irq2 irq1 23 22 21 20 19 18 cnt1 cnt0 resync 14 13 12 count=4095 ] cx88[0]: risc3: 0xffffffff [ INVALID sol eol...

We are trying to debug a connection between Asterisk and a legacy PBX (Mitel SX200). We turned on the Zaptel debugging and we get the following message quite frequently: Oct 12 07:14:09 localhost kernel: T1: Lost our place, resyncing ( 28 ) Oct 12 07:14:09 localhost last message repeated 3 times -- Oct 12 07:14:11 localhost kernel: T1: Lost our place, resyncing ( 28 ) Oct 12 07:14:11 localhost last message repeated 7 times -- Oct 12 07:14:15 localhost kernel: T1: Lost our place, resyncing ( 28 ) Oct 12 07:14:15 localhost las...

Hello, After some fiddling with the server now I have broken RAID1 with the "current" mirror on the disk with few unreadable sectors. If I try to re-add other disk to the mirror resync goes till those bad sectors and then starts from the beginning. And so on. Is it possible to somehow force resync to continue even after errors? Manual resync with dd would require a bit too long downtime. If it is impossible to force resync I'll probably manually rsync all the files from...

...e new jitterbuffer and trunking options for IAX2, I have finally received almost acceptable quality. I am receiving 5-8 complaints a day of calls "breaking up" from both the customer and agent sides. What I have discovered is that in most of these cases, the new jitterbuffer performed a resync during the call. Currently, I have the resyncthreshold, and all other jb parameters at their default levels The traffic is running over a fairly high latency WAN connection between Canada and Atlanta (IAX2, ILBC). Idle ping times run about 85ms. > I am interested to know why you are using ilbc...

I just added a new namespace-alias with alias_for. Apparently this causes all mailbox indexes to be resynced? Is this intentional and/or is there some way to avoid this? My NFS storage pretty much kills its elf when hundreds of thausands of users needs to resync indexes :) Thanks -- Tom

Hi All, Anyone know the sip header to send to a Linksys to resync it's config file? Thanks. JR -- JR Richardson Engineering for the Masses

We have several CENTOS 4 and 5 servers. ALL CENTOS servers have NTP setup to sync time server. Several days ago due to power outage all servers are reboot. Due to DNS server did NOT up quickly, CENTOS servers start up and can NOT find time server. For CENTOS 5.X servers, it did quickly resync to time server after 30 minutes. For CENTOS 4.X servers, it have been 3 days still NOT sync to time server. I know I can run "service ntpd restart" to force server sync to time server, but I like to know how long it take for CENTOS 4.X automatic resync to time server. Thanks.

I'm interested to know of any player, which can properly resync after receiving a theora+vorbis stream that has been cut somewhere in the middle... ie it doesn't start at granule 0. The problem being... when streams are cut in this way, the start time, and the times of the first few packets in each stream are unknown. When working at a packet level......

Has anything changed in updates that would affect md raid1 resync speed? I regularly swap a 750G drive and resync to keep an offsite copy and haven't paid enough attention to known when things changed but it seems to take much longer to sync than it did months ago, even if I unmount the partition and stop most other processes that might compete with it....

Eric "ManxPower" Wieling wrote: >> >>> span=1,1,0,d4,ami >>> e&m=1-24 >>> > > Looks like you have told Asterisk to get it's timing from the Mitel. > I'll bet the Mitel is trying to get it's timing from Asterisk. > > Try span=1,0,0,d4,ami and run ztcfg -vvv > I just set this back. It was originally set to your

Hello, I have a c5 box with a 6 drive raid 6 array. I was going away over Christmas so I was shutting the machine down, I noticed a raid resync (on the raid 6 array) so i stopped it, using the command # echo "idle" > /sys/block/md5/md/sync_action then shut the machine down. A week later I turned the machine on and started copying data to it around 24 hours later a raid resync occurred and wiped all the new data I had copie...

Hi, when I specify a slash a mailbox name on the command line of doveadm force-resync, it throws a panic. I'm not sure this is considered a bug. mail01:~# doveadm force-resync -u user1 at example.org / doveadm(user1 at example.org): Panic: file mailbox-list-fs.c: line 150 (fs_list_get_path): assertion failed: (mailbox_list_is_valid_pattern(_list, name)) doveadm(user1 at example...

To my understanding, when using mdbox, doveadm force-resync should be able to recover all the messages from the storage files alone, though of course losing all metadata except the initial delivery folder. However, this does not seem to be the case. For me, force-resync creates only partial indices that lose messages. The message contents are of course sti...

...rmissions for /var/lib/samba/ntp_signd. This > appears to be the path where samba expects to find this on the Ubuntu > distribution. Is there a way to verify that this is the correct path? > > I've restarted both the samba ad dc and chrony services. > > However, running w32tm /resync on my W10 domain member is still not > working. > > running: C:\WINDOWS\system32> w32tm /query /source > returns only -> Local CMOS Clock > > Also... > --- > C:\WINDOWS\system32> w32tm /resync /rediscover > Sending resync command to local computer > The comput...

...ou might want to try the very most recent kernel in git to see if your problem is fixed. Best regards, -- Charles Polisher Date: Mon, 13 Jun 2016 15:51:19 +0200 From: Tomasz Majchrzak <tomasz.majchrzak at intel.com> To: linux-raid at vger.kernel.org Subject: [PATCH] raid1/raid10: slow down resync if there is non-resync activity pending A performance drop of mkfs has been observed on RAID10 during resync since commit 09314799e4f0 ("md: remove 'go_faster' option from ->sync_request()"). Resync sends so many IOs it slows down non-resync IOs significantly (few times). Add...

...9;d. > > I use dovecot's lda and dovecot's sieve filter. Then I'm not sure how mailboxes ever get out of sync. > So it looks like I need to compare the index/mailbox mtimes as you suggest. > > What am I looking for? > I see that the indexes are updated when I run the resync. > > I checked my mailbox (that was not resynced) and noticed that > dovecot.index last update was 16 days ago. Just to be clear, you're talking "doveadm index ...", yes? You might have to check dovecot.index.log* as well as they could contain the latest changes that have y...

...that this new instance hadn't been set up correctly for nfs. Long story short, I still get users with new cases of corrupt indexes. The symptom is imap either showing NO mail in their inbox, or, not showing any recently delivered mail in the box, until I rm -f dovecot.map.index / doveadm force-resync -u user. It would be a huge help if there could be some method to detect if this is the case for any given user and to proactively do the force-resync process for them instead of waiting for that support call (or service cancellation...). I have looked around and have not found any tool capable of...

> Hallo Simon, > >> Anyway, the splitting of large disks has additional advantages. Think of >> what happens in case of a failure (power loss, kernel crash...). With >> the >> disk as one large chunk, the whole disk has to be resynced on restart >> while with smaller segments only those which are marked as dirty have to >> be resynced. This can make a bit difference. > > I am not sure if this is true. If a underlying disk fails, it will mark > all partitions on that disk as dirty, so you will have to resyn...