search for: reregistrations

...is major bottleneck? qualify imho not. i'm tried set qualify=no, does not help SIP REGISTER packets? this problem persist if no calls are active after restart cpu usage slowly increase. after a ~hour is about 100% which optimalizations do you recommend for ~1500 peers scenario? (behind nat, reregistrations) --------------------------------------- Marek Cervenka =======================================

Hi list! I?m connecting a Brasilian voip (- gvt.com.br -) provider through my asterisk box and using the register command from sip.conf. What I can?t understand is why my unit sends a new registration message every minute! And every time my asterisk box sends a registration, it gots a sucessful response, and shows de message: "Oct 14 16:48:22 NOTICE[4090]: chan_sip.c:8742

I've tried everything with the * box after this weekend. I have read every document on the problems people are having with them after this weekend as well, but none of them address my problem. I checked my settings in my sips which I have below as well, I have changed the host file a few times, but this was new to me and I never had modified it before. I have and the same results

I can cut and paste the log file from a reload right now, and provide you with the other information when I get home after work: tmp*CLI> sip debug SIP Debugging Enabled tmp*CLI> reload Mar 21 14:52:42 NOTICE[23231]: indications.c:397 ast_unregister_indication_country: Removed default indication country 'us' 11 headers, 0 lines Reliably Transmitting: REGISTER

Hi all, I'm having trouble with incoming IAX2 calls on 1.2.7.1 - mostly they work, but sometimes the caller just gets dead air or disconnects. IAX2 debugs show HANGUP and INVALID codes in these cases, rather than a proper RINGING transaction. My firewall is doing NAT, and changing the source port from 4569 to something else - my IAX2 provider suggested this might be a problem. Is it?

Can one server (like AMD 6000+ X2) with 2 GIG ram running asterisk 1.4 handle having 2100 wireless phones connected. All phones will not be talking at the same time only a couple will be. There may be 1 T1 card in the box. Will this work? If not how does one handle this situation. Thanks, Jerry

I'm sure this has been asked a million times before, but is there an easy wa to have Asterisk register more than one (distinct) contact binding concurrently? The goal is to have two phones register with the same credentials from different locations and consistently and reliably ring on inbound calls, irrespective of their registration intervals and so on. -- Alex Balashov Evariste Systems

Hello, Please forgive me if I'm repeating this post. I have searched and looked for similar problem with a solution but have not see a similar one. My outgoing SIP and other channels work fine but the incoming/inbound SIP call goes straight to Broadvoice voicemail. I see that Broadvoice is registered when I look at the SIP registry. I have turned on SIP Debug and it is below. Anyone know

Hi, I have researched more into the problem of my Asterisk set-up not answering calls. The following error was shown on the CLI, can anyone explain what the problem causing Asterisk to not answer the SIP calls be? Information: I have an Asterisk box on a home LAN, behind a D-Link router/firewall connected to a cable modem. The 82.x.x.x is the IP for my cable modem. 192.168.0.101 is my

I'm still not getting my outbound to work. I've seen two patches relevant to broadvoice for chan_sip.c which apparently have already been added to CVS. I'm dropping all outgoing calls after ~30 secs. Asterisk doesn't seem to know they're gone though. I called my cell w/ broadvoice and turned on sip debug AFTer the call had physically dropped: *CLI> sip show registry

(this time with subject....) Hello, I?m trying to get Asterisk to accept incoming calls from budgetphone.nl. When I dial my budgetphone nr on a PSTN KPN line it immediately gives a busy tone. I tried X-lite, which worked perfect, so my modem (with nat) probably is not the problem. I did a sip debug and got the following output. Because I?m new to Asterisk I can?t get the error why this is not

Hi All, I am new to this community and just subscribed. We have Asterisk running in production but I could not find out in documentation as well as web that how many maximum number of registrations an Asterisk Server can support. We have it on a 1.4 GHz Processor, 2 GB RAM and 40 GB HDD IBM Server. Please suggest urgently. Thanks. Best Regards, ------------------------------------- Abid

I lost my internet connection today for a short time. During that time 1.2.12.1 stopped talking to my phones. Asterisk was still working as I got 2 voicemails. I have TDM analog cards for incoming calls. Anyway my cisco phones had X's (lost registration) and my uniden phones said "Registration error". Why would phones loose registration to asterisk when the internet connection

Hi all, I just upgraded to Asterisk 1.4.18 a few days ago and I don't use Broadvoice TOO often, however I have a Vermont number with them and so my mother in law calls it to talk to my wife once in a while, so that's why it took me so long to notice it wasn't working. Anyway, when she calls she gets a busy signal (as I've tested when calling it from my cell). When I enable

I'm trying to get Asterisk to accept incoming calls from budgetphone.nl. When I dial my budgetphone nr on a PSTN KPN line it immediately gives a busy tone. I tried X-lite, which worked perfect, so my modem (with nat) probably is not the problem. I did a sip debug and got the following output. Because I'm new to Asterisk I can't get the error why this is not working. To me it all

In the Asterisk log I see: --- [Mar 23 19:25:29] VERBOSE[4067] chan_sip.c: [Mar 23 19:25:29] <--- SIP read from UDP:198.38.7.34:5065 ---> SIP/2.0 200 OK To: <sip:16046289850 at sip.babytel.ca>;tag=sd3D4swKRc From: <sip:16046289850 at sip.babytel.ca>;tag=as07c833c5 Via: SIP/2.0/UDP 96.48.217.39:5060;branch=z9hG4bK13c68eb7;rport Call-ID:

Hi, I am new to Asterisk and am runing asterisk 1.2.9.1 on an OpenBSD box. With a few manuals I was able to set up some SIP providers with which outgoing and incoming calls work. However, there is one provider with which inbound calls don't work at all. The only apparent error/warning message is this WARNING[13688]: chan_sip.c:3527 process_sdp: Unable to lookup host in c= line, 'IN IP4

Signed-off-by: George Zhang <georgezhang at vmware.com> --- drivers/misc/vmw_vmci/vmci_doorbell.c | 749 +++++++++++++++++++++++++++++++++ drivers/misc/vmw_vmci/vmci_doorbell.h | 54 ++ 2 files changed, 803 insertions(+), 0 deletions(-) create mode 100644 drivers/misc/vmw_vmci/vmci_doorbell.c create mode 100644 drivers/misc/vmw_vmci/vmci_doorbell.h diff --git

Signed-off-by: George Zhang <georgezhang at vmware.com> --- drivers/misc/vmw_vmci/vmci_doorbell.c | 749 +++++++++++++++++++++++++++++++++ drivers/misc/vmw_vmci/vmci_doorbell.h | 54 ++ 2 files changed, 803 insertions(+), 0 deletions(-) create mode 100644 drivers/misc/vmw_vmci/vmci_doorbell.c create mode 100644 drivers/misc/vmw_vmci/vmci_doorbell.h diff --git

I am having issues with transfers (SIP/REFER) using Asterisk 1.6. You will find the SIP debug below. There are three phones in this setup. 5253 and 5258 are Aastra 53i telephones, 101 is a standard phone connected through an Audiocodes gateway. All phones are registered in context "phones" and are set to not allow reinvites. All phones can dial each other directly. The dialplan