search for: reinitialise

I was wondering if anyone had experienced the following with asterisk stable. After a period of time (can vary), If I stop asterisk and try to run ztcfg -v to reinitialise my quad e1 card, the server will lock up. Sometimes it's a complete lockup, where it won't even return pings, other times it seems to be "partially screwed". -- ========================================== Rod Bacon Empowered Communications Ground Floor, 102 York St. South Melbo...

...can fix this issue simply by mkdir'ing the directory /etc/firstboot.d/data at some point in xapi's installation. This would allow the pool-eject to proceed, but I think that there might be problems when the host reboots: since none of the firstboot scripts will be called, the host might not reinitialise properly. I think at this point that's all we can hope for. George, can you test that creating the /etc/firstboot.d/data directory gets you past the current exception your having? If this works good enough, let's make this the fix for now. Jon, do you have any other thoughts on this bug?...

Now, at least in release 3.7.1, on an encounter with a fatal error at the time of compiling a module it will call an installed handler function and allow the application to log the error etc. However once said handler returns LLVM will force an exit of 0x1, something that I cant allow to ever occur, but according to the ErrorHandling header I cant safely throw an exception to back out of the error

...; and clicking on that will launch the Lightbox script. Once you close the Lightbox overlay though none of the jpegs written into the div will work under lightbox (they default to a standard (a href= mode). I''ve tried all sorts of things including Event.observe to try and reload/relaunch/reinitialise the lightbox() function - nada Any suggestions as to how I can reinitialise the script? Bob --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ruby on Rails: Spinoffs" group. To post to this group, send emai...

Hi, There has been some recent work to improve the speed of the Message Authentication Codes (MACs) that are used in OpenSSH. The first improvement is a change from Markus Friedl to reuse the MAC context, rather than reinitialising it for every packet. This saves two calls to the underlying hash function (e.g. SHA1) for each packet. My tests found that this yielded at 12-16% speedup for bulk

...ll the package on the first machine (say pcA). The central directory on the share is created and the files are installed. The package now works excellent. Then I install the package on the second machine (say pcB). The central share is found, but on Samba the important "database" file is reinitialised, deleting all the information put into it using pcA. The shares are mapped using the same account name and password (only one PC needs to be active at the same time). I have tried both Samba Version 2.0.5a, and Version 3.0.3pre2-2.pre2. Both behave exactly alike. On version 3 I have experimented...

...s(+), 31 deletions(-) diff --git a/src/nv_driver.c b/src/nv_driver.c index 248a151..9606d97 100644 --- a/src/nv_driver.c +++ b/src/nv_driver.c @@ -315,8 +315,6 @@ NVAdjustFrame(int scrnIndex, int x, int y, int flags) /* * This is called when VT switching back to the X server. Its job is * to reinitialise the video mode. - * - * We may wish to unmap video/MMIO memory too. */ /* Mandatory */ @@ -333,9 +331,6 @@ NVEnterVT(int scrnIndex, int flags) if (ret) ErrorF("Unable to get master: %d\n", ret); - if (!pNv->NoAccel) - NVAccelCommonInit(pScrn); - pNv->allow_dpms = FALS...

...2^31 > rollover problem. (It spits out bursts of white noise after about 3 > hours at 44.1kHz.) I think I've noticed that one in the past, but I almost never use ogg123, so I haven't looked into it. > > The bump is noticeable. I suspect it's due to the encoder being > reinitialised in order to get a new serial number. That cause a substantial jump in both cpu usage and bitrate for a moment, but if your client has any buffering at all (and most of them buffer quite a lot), then that shouldn't be a problem in any way. I'm curious as to why it is... it might just be th...

...are fairly large. There are approximately 300 bookmarks and about a dozen Addons. However, none of the user's addons are outside the usual for our firm and I myself have all the ones on the user's profile and many more besides. And I do not encounter these problems. Once the profile is reinitialised FF behaves normally for several days and then degrades again. I am suspicious that there is some problem relating to the roaming profiles but other than a vague suspicion I have nothing to go on. My question is: how does one go about determining if the problem is with FF itself or with some aspe...

Hi, I have the same problem as Helmut with INCLUDE keyword and extlinux 5.10 an later. The following configuration has been tested and worked with extlinux 4.05, 4.06, 5.01 Contents of "boot_label" file DEFAULT 1 --------------------------------------- Contents of "extlinux.conf" file # Enable menu.c32 UI menu.c32 # Disable the boot: prompt PROMPT 0 # 5 sec TIMEOUT 50 #

hi, I seem to have a problem with the Linux xen-network driver leaking skbs. This is probably my own fault, upon resumption after migration I call this: void network_resume(void) { struct net_device* dev = __dev_get_by_name("eth0"); MOD_DEC_USE_COUNT; network_open(dev); } -- which works fine. However, in network_open() the call to NETOP_RESET_RINGS seems to clear all the

Hello Folks: Every now and then my ogg123 quits while loistening to the stream. It isn't a bandwidth problem because my ogg123 is on a machine which is just a few feet from the server and is in fact on the same machine with ices2 doing the streaming. It happened this morning and I decided to take a look at the log and found some curious messages and thought maybe I'd post them here and

Using my application i can able to save a new record into my db but i cannot update a existing record into my db. using update query i can able to update my records. but using update_attributes it doesnot update my records. even i cant find any errors in logs or something. throughout my application i can able to save a new record but unable to update my existing records. actually i have changed

http://bugs.freedesktop.org/show_bug.cgi?id=25658 Summary: Move to loadable firmware breaks suspend on nVidia 9800M Product: xorg Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at

...parameters to the new function. So, when I extract the new function in a separate file, it doesn't see the modifications that have been done on the static structures. If I include the globals of the module in the new file, these structures are redefined, so my function gets them all as being reinitialised. I need to process the new file with llvm-as and llc, and as far as I know these tools do not accept more than one file as parameters. The only solution that comes to my mind is to modify the llvm::ExtractCodeRegion to send as parameters also the globals used inside the code to be extracted. B...

...> approximately 300 bookmarks and about a dozen Addons. However, none > of the user's addons are outside the usual for our firm and I myself > have all the ones on the user's profile and many more besides. And I > do not encounter these problems. > > Once the profile is reinitialised FF behaves normally for several days > and then degrades again. I am suspicious that there is some problem > relating to the roaming profiles but other than a vague suspicion I > have nothing to go on. My question is: how does one go about > determining if the problem is with FF itse...

...../samba/private. We have not left this file in place as we were using the NT box to authenticate and keeping Unix passwords and NT passwords in sink is not easy. We attempted to create this passwd file from the passwd file on the Unix box using mksmbpasswd.sh, this created the file. When we reinitialise samba and tried the test again, the log file displayed new messages saying that the passwords didn't match, defaulting to Lanman from NT. Suspect this file creates passwords with lanman OWF not NT's, probably why there is a problem in this case. Note this was meant as a temporary get out w...

...ustration as I wasn't able to use http functionality in a running R session after moving to an environment with a different/no proxy server. After some digging I found that this behaviour was caused by RxmlNanoHTTPInit() in src/modules/internet/nanohttp.c, which after its first call refuses to reinitialise the proxy configuration. It does so by setting a variable 'initialized' to 1, and checking whether the string 'proxy' is non-NULL. I have made a small modification to have RxmlNanoHTTPInit() ignore these variables and to read in the proxy configuration at each call. $ svn diff Ind...

...to include "foo" does is cause the the parser to fail to open the file. In other words, the behaviour will be the same whether you delete the include directive or wrap the filename in double-quotes. I do think I see what the problem is though. Essentially, the config parser completely reinitialises itself when parsing the include directive, instead of cumulatively adding the contents. I'll bisect to see why this broke after 5.01. -- Matt Fleming, Intel Open Source Technology Center

I just built icecast and ices from CVS source. The compile went fine. But I'm having trouble connecting to the server and hearing anything. In one shell, I start icecast with: src/icecast -c conf/icecast.xml That appears to start things off fine. Then in another shell, I start ices: src/ices conf/ices-playlist.xml At this point, icecast prints some text: connection added.... DEBUG: source