search for: redhat4

Hello, Running client on redhat4 version 3.0.28-0 and the server on Solaris 10 version 3.0.25c Writing 2-3megabytes/second. Something stopped working. On the client I ran strace against the mount.smbfs process: It showed pause( On the server all I saw was this: [2008/11/30 14:14:43, 1] smbd/service.c:(1230) 192.168.1.200 (...

...e is on the switch port with a port mirroring function). Eventually after 20 minutes the board resets and than it starts without any problem. We have seen this with syslinux 4.00 and 4.02. Is this problem known? How can we investigate it further? So far we were not able to rebuild pxelinux.0 on a RedHat4 system to add debug info (additional printf), the file gets too large for prepcore. Is it possible to post the output of the original make process to check any differences ( I have gcc 4.2.3 and nasm 2.09) or at least the version of the tooling needed? (I am very interested in the thread How to com...

...to *SMBSERVER failed (Not listening for calling name) stevens# This is my smb.conf: # This is the main Samba configuration file. You should read the # #======================= Global Settings ===================================== [global] # workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 workgroup = workgroup # server string is the equivalent of the NT Description field server string =stevens hosts allow =192.168.0 192.168.1. 192.168.2. 192.168.3 127. # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" i...

hi i am installing scalix mailserver while installing RPM i am getting this error: Failed dependencies: compat-libstdc++-296 is needed by scalix-server-10.0.1.3-1.fc4.i386 libcrypto.so.5 is needed by scalix-server-10.0.1.3-1.fc4.i386 libgssapi_krb5.so.2(gssapi_krb5_2_MIT) is needed by scalix-server-10.0.1.3-1.fc4.i386 libical >= 0.24.RC4.20050413 is needed

...or a RedHat default install ; smbd re-reads this file regularly, but if in doubt stop and restart it: ; /etc/rc.d/init.d/smb stop ; /etc/rc.d/init.d/smb start ;======================= Global Settings ===================================== [global] ; workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 workgroup = WORKGROUP ; comment is the equivalent of the NT Description field comment = RedHat Samba Server ; volume = used to emulate a CDRom label (can be set on a per share basis) volume = RedHat4 ; printing = BSD or SYSV or AIX, etc. printing = bsd printcap name = /etc/printcap l...

...gularly, but if in doubt stop and restart it: ; /etc/rc.d/init.d/smb stop ; /etc/rc.d/init.d/smb start ;======================= Global Settings ===================================== [global] wins server = 192.168.0.71 encrypt passwords = yes ; workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 workgroup = UNIXGROUP ; comment is the equivalent of the NT Description field comment = RedHat Samba Server ; volume = used to emulate a CDRom label (can be set on a per share basis) volume = RedHat4 ; printing = BSD or SYSV or AIX, etc. printing = bsd printcap name = /etc/printca...

...y for DNS and Wins. Please Help! Here is my smb.conf file. # This is the main Samba configuration file. You should read the #======================= Global Settings ==================================== [global] ## ## Basic Server Settings ## # workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 workgroup = TVGBCAST netbios name = laxbcastdns01 # server string is the equivalent of the NT Description field server string = # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts a...

I'm running dovecot 20051026 version on Redhat4. I tried to do a stress test. However dovecot dies after I login a few hundred users. I have some error messages in my mail log and am not sure if they are related to the problem. [root at lms2 imap1505]# service dovecot status dovecot dead but subsys locked Nov 10 12:58:52 lms2 dovecot: imap...

Hi there, I'll soon run RedHat4 U4 ES with multiple 4TB partitions. Almost all files on these partitions will have a fixed size of 32MB. What are the best tweaks around to optimize blocks and inodes ? Thanks, Ionel -- Ionel GARDAIS System-Network Engineer -------------- next part -------------- A non-text attachment was scru...

Hi there, Sorry for the dup, here are more informations. I'll soon run RedHat4 U4 ES with multiple 4TB partitions made of a 7-disks RAID5 array. Almost all files on these partitions will have a fixed size of 32MB. Should I leave the default raid chunk size to 64k with ext3's 4k blocks ? What are the best tweaks around to optimize overall performance ? Thanks, Ionel --...

...= /var/log/samba-log.%m max log size = 50 socket options = TCP_NODELAY security = user domain master = yes local master = yes preferred master = yes logon script = Logon.bat domain logons = Yes os level = 65 wins support = Yes comment = RedHat Samba Server strict locking = Yes volume = RedHat4 [netlogon] comment = Logon scripts path = /womer/netlogon guest ok = No writable = No hosts allow = ALL [public] comment = Shared files on dedicated 6.5gb disk path = /womer/Public write list = @cad,@admin,@womer, read only = No create mask = 0774 directory mask = 0774 guest ok = Yes...

...nix file system to Windows. Installed samba and made changes to config file smb.config There's a problem when I map the drive. Its gives me a err msg " Incorrect password or unknown user name for IPAddress\workgroup" The config file # workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 workgroup = JPROBE30 # homedir = NT - Mapped drive, eg:%H homedir map = %H [JPROBE30] ; comment = User Shashi Stuff path = /clocal/www/user/shashi/snapshots public = yes readonly = No writable = yes create mode = 777 default case = lower preserve case = No director...

...with Win95) > > 2) Here is my smb conf file > -------------------------------------------------------------------------------- > ;======================= Global Settings ===================================== > [global] > > ; workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 > workgroup = hello > domain sid = S-1-5-21-123-456-789-123 > encrypt passwords = yes looks fine. > ; Domain Master specifies Samba to be the Domain Master Browser > ; Only ever set this if there is NO Windows NT Domain Controller on the > ; network >...

...de a samba share so that only certain groups from a NT-server would have read only writes, but where one person could belong to more than one group. Thats all for now. Thanks Mark -------------- next part -------------- [global] workgroup = IMPROTECH comment = RedHat Samba Server volume = RedHat4 printing = bsd printcap name = /etc/printcap load printers = yes ; guest account = pcguest log file = /var/log/samba/samba-log.%U max log size = 5000 ; case sensitive = yes short preserve case = yes preserve case = yes lock directory = /var/lock/samba locking = yes...

...on file (smb.conf) sdmb08:/usr/local/samba/bin 66 #> more ../lib/smb.conf ; The global setting for a default install ; Copyright(C) John H Terpstra - 1997 ;======================= Global Settings ===================================== [global] ; workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 workgroup = sdm netbios name = sdmpcsv02 server string = SdM Server Win95 ; comment is the equivalent of the NT Description field comment = Samba Server ; Uncomment this if you want a guest account, you must add this to /etc/passwd ; guest account = pcguest log file = /usr/local/...

...======= Share Declarations ============================== strict locking=yes guest account=nobody preserve case=yes ;wins support=yes workgroup=BELMONT security=SHARE interfaces=eth0 max log size=50 ; keep alive=60 short preserve case=yes load printers=no ; printcap name=/etc/printcap ; volume=RedHat4 lm announce=yes netbios name=LASTBARD [mystuff] comment = Free Stuff path = /share public = yes writable = no printable = no guest account = nobody _______________ any help would be appreciated:) -- http://www.geocities.com/vienna/1628 lastbard on AOL instant messanger...

Has anyone had experience with MIT Kerberos tickets not valid after server reboot? After server reboot I have to do a 'kinit' to get a new ticket, re-join the AD domain, and restart samba. Then all is fine until I have to reboot the server again.. Same thing again and again. My time is synced, Kerberos tickets are good for 500d.

...nable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not many any basic syntactic errors. # #======================= Global Settings ===================================== [global] # workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 workgroup = WORKGROUP ################################################################## passwd program = /usr/bin/passwd log level = 3 use client driver = yes disable spoolss = yes ################################################################# # server string is the equivalent of the NT Des...

...s, ACL will disappear. Any suggestion or advice will be greatly appreciated. --------------------------------------------- smb.conf --------------------------------------------- #============== Global Settings =========== [global] # workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 workgroup = WORKGROUP # server string is the equivalent of the NT Description field server string = Toukei SAS Server log level = 3 # this tells Samba to use a separate log file for each machine # that connects log file = /usr/local/samba/var/log.%m # Put a capping...

...0298 auth_resp : 23baed01 029c status : NT_STATUS_OK Plain-text authenticaion for user WESTCOASTDHB+mroper returned NT_STATUS_OK (PA) client_write: wrote 1300 bytes. read failed on sock 11, pid 6607: EOF My config file is [global] # workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 workgroup = WESTCOASTDHB # server string is the equivalent of the NT Description field server string = Samba Server # this tells Samba to use a separate log file for each machine # that connects log file = /usr/local/samba/log.%m # Put a capping on the size of the log files (in Kb)....