search for: realteks

Subject says it all. How can I get the 1.3 version and 0.9.28 to compile on CentOS 5.8 ??? When I compile the two as modules I get errors. My Makefile is: obj-m += 8139cp.o 8139too.o all: make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules clean: make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean The errors I get are: Entering directory

Hi list, I'm planning to buy a mobo (z170-K) that has Realtek 8111GR (nic). I've tried to search on google about support on C7 but can't fine anything. There is a way to check if supported? Is the Realtek 8111GR supported or I must change mobo? Thanks in advance.

I have an Asus P5Q-WS running FreeBSD 7 and the onboard Realtek NIC's are not being detected. No Kernel modifications as this is a fresh install. pciconf -lv : re0@pci0:3:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network

I found (and fixed) a problem with my realtek onboard 8139 controller. dhcpd server sends filename "pxelinux.0" but realtek requests "pxelinux.0\377" (i.e. the octal character 377 is appended), resulting in a file not found during the tftpd phase. I fixed this by adding a mapping to tftpd: # strip ending garbage from filenames (Realtek PXE bug) r ^([[:graph:]]*)(.+)$ \1

Greetings- I'm attempting to get CentOS 5.5 x86 (yes, very specific version required for specific software usage scenario... don't ask) running on an Intel D425KT mini-ITX motherboard. Everything works fine, with the exception of the onboard ethernet, which is a Realtek RTL8105E chip. The stock CentOS installation attempts to use the r8169 driver, which does not work. I've been around

Realtek is "real" good about getting drivers for their chips into the kernels as soon as possible. They are one of the few vendors that I have never had a problem with built in support... Mike McCarthy On 06/03/2016 08:03 AM, Phil Manuel wrote: > You can get the Linux driver from >

Hello, I am bussy building a xen cluster. When selecting mainboards for this cluster i came only up with core 2 duo mainboards with onboard gigabit ethernet cards with the realtek RTL8111B chipset. I have tested a mainboard and could not find a way to compile the driver sourcecode from the realtek site because of a missing /lib/modules/2.6.16-xen/Build directory. Can anyone help me out? I am

Hi, I am trying to run solaris 10 (9/10) on Xen 3.4 (centos5.5 as dom0) in HVM mode. I can see the realtek 8139 network adapters when I do pciscan but ''ifconfig -a'' just lists loopback device. I can load rtls drivers but still these realtek interfaces are not available. I found a link which does say The rtls driver from Realtek still uses version 0 interfaces that are now

On 14/05/2019 13:09, Jonathan Billings wrote: > On Tue, May 14, 2019 at 10:13:35AM +0800, qw wrote: >> I use the wifi adaptor, Edimax AC1200, and its driver can be >> downloaded from >> >> 'http://www.edimax.com.tw/edimax/download/download/data/edimax/tw/download/for_home/wireless_adapters/wireless_adapters_ac1200_dual-band/ew-7822ulc'. >> >> >>

Hi! I?m having trubbles with the speed on my samba server, I just uppgraded to gigabit (Realtek 8169 NIC) at home when i copy stuff from the samba server i get around 5-6Mb/sec and if i use ftp to access the same file on the same server i get almost 30Mb/sec does anyone have a clue what causes this problem? When i used my old 3com 905c for the local net i got normal 100Mbit speed (around

Hi, Last friday I changed the NIC in two of our Samba servers from a 3com 905b (100mb) to a 3com 2000T (1000mb) to take advantage of our new switch which supports gigabit. One of the workstations (XP SP1, with all subsequent patches and hotfixes and with an onboard Realtek 8139) then started to have problems with the two Samba servers with the new NIC's. It could see the network

Greetings, I am tearing my hair at getting this to work under centos 5.5/Ubuntu 10.04. Any suggesstions (Repos, RPMs etc)? My MB Intel embedded NIC blow up after a lightning (Mumbai get _real_ heavy mansoon rains inter alia). I want this to make work under Centos 5.x (and 6.x subsequently who DVD I have been downloading with a pithy 128kbps connection). -- Regards, Rajagopal

Completely agree. I used to have 8139c cards in my home machines, on a switched 100mbit network, including a Dual P3 server that I run 4 x 80G drives with a HPT454 RAID5 array (software I know, but the dual P3 copes admirably), both the server and my main desktop (dual Athlon MP 2600) were getting to the point of being unusable when such high CPU useage when transferring large documents (Quark

I''m trying to build out a test cloud using XCP 1.0.0 beta with 3 machines of 18 cores total (Phenom II 1090s). I''ve built three machines, installed XCP 1.0.0 beta on them and they all three have the same problem - the Realtek network cards don''t work. The following is the output from lspci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI

Hi, I try to make my SD-reader work on a HP ZBook. lspci 5d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5249 (rev 01) uname -a Linux Antisana.psc-elsene.be 2.6.32-431.17.1.el6.x86_64 #1 SMP Wed May 7 23:32:49 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Googling gave me http://linuxterminal.org/issue-with-rts5229-pci-express-card-reader/; last reply by Fran?ois suggests to

Hi all, I swapped a Realtek 8139 100M Net Card for a Realtek 8169 Gig Net card in a Centos 5.6 system. After reconfiguring the network settings I find that on boot up the 8169 interface does not start. The startup script says something like "The 8169 is not available..." ifconfig -a shows a device with the right mac address called __tmpsomethingorother I can get it going if I

I was trying to do some performance testing between using iSCSI on the host as a diskfile to a guest vs the VM guest using the iSCSI device directly. However, in the process of trying to establish a baseline performance figure, I started increasing the MTU settings on the PCI-express NICs with RTL8168B chips. First bottleneck was discovering the max MTU allowed on these is 7K instead of 9K but

greetings one and all. installing centos 7 32 bit i386 to laptop; specs: toshiba satellite l455d-s5976 amd sempron si-42 2 GB ddr2 250 GB hdd ]$ lspci|grep Realtek 0e:00.0 Network controller: Realtek Semiconductor Co., Ltd. \ RTL8187SE Wireless LAN Controller (rev 22) 14:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. \ RTL8101/2/6E PCI Express Fast/Gigabit Ethernet

You can get the Linux driver from http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=5&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#RTL8111B/RTL8168B/RTL8111/RTL8168%3Cbr%3ERTL8111C/RTL8111CP/RTL8111D%28L%29%3Cbr%3ERTL8168C/RTL8111DP if you can't find it under C7 Regards On Fri, Jun 3, 2016 at 8:11 PM, Alessandro Baggi <alessandro.baggi at

ok thanks for your answer so quickly !! Cheers Rémi ----- Original Message ----- From: "James Harper" <james.harper@bendigoit.com.au> To: "Rémi BERNIER" <R.BERNIER@grelier.com>; <xen-users@lists.xensource.com> Sent: Thursday, October 29, 2009 9:49 AM Subject: RE: [Xen-users] How to hide Realtek card with GPLPV 0.10.0.130 > > Hi everyone, >