search for: realtec

I was seeing rsync errors which caused my system installations to fail repeatedly and absolutely. See the error I reported to this mailing list back in June in the Forwarded Message below. When I replaced my NIC cards (realtec chip, 8139too driver) with Linksys cards (and Dec Tulip driver for linux) the problem ceased, rsync worked like it should, and does so repeatedly. My suggestion would be to keep and publish on the Rsync website a list of linux network hardware and driver combos that are: 1. Know Good, 2, Known to...

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the d...

Hi, The Samba Team! Sorry for my poor English (I am russian). I have 4 PC's in my home net: 1: Athlon 1.2GHz MB ABIT KT7 NetCard:PCI Realtec 8029 (Thin Ethernet) Win2k Rus(ver 5.00.2195) 2: P233MMX MB Phoenix Net:ISA NE2000 compatible Win 95 Rus (ver 4.00.950) 3: Server & router - P166 MB Tomato(?) Net: ISA NE2000 compatible, ISA Genius GE2000 Linux Red Hat 7.2 Kernel 2.4.18 Samba, PDC, Master browser (OS Level = 65) 4: My neighbour...

Hi All, I have just built a new P 4 1.8 RH8.0 Server rpmed up to Samba 2.2.7-2 It works GREAT for smbmounted shares on my linux boxes and sssllllooooowwww on my Windows clients (2K and 98) Specifically, moving a 15 Mb file over my 100 MBit network with one hub takes around 20 sec for the smbmounted share on a Linux box and 8 minutes on a Win2K/98 box. Any ideas? Simon

Im trying to find the best hardware to run asterisk on. I see that the compatibility list is a little dated. Any recommendations out there? This is for a 19 phone system with 2 tdm cards? Thanks Hart Green -- Internal Virus Database is out-of-date. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.4/705 - Release Date: 2/27/2007 3:24 PM -------------- next

...nc 2.5.[1,2,4,5] on my rsync server, and I get the same results. The target disk I am working with never gets more than 2% full when the rsync client and server quit talking to each other. I'm using a 2.4.18 Linux kernel(both), ext2 filesystems (both). Networking is 100Mbit, each NIC card is Realtec 8139too driver compatible. I've tried adding the '--bwlimit=NNNN' and '--blocking-io' options when invoking the client rsync, but neither affects the result. Suggestions on how to proceed would be greatly appreciated. Thanks -- Bill Geddes bill_...

...e rsync client and server not talking to each other: 2002/06/21 14:24:48 [30675] rsync: error writing 4096 unbuffered bytes - exiting: Connection reset by peer 2002/06/21 14:24:48 [30675] rsync error: error in rsync protocol data stream (code 12) at io.c(463) Pertinent hardware data: NIC card has Realtec 8139 chip. Motherboard has Via VT8367 chipset. IBM 80Gb, 7,200rpm disk. Software: Rsync 2.5.5-0.1 Since I discovered I was getting bad disk I/O, I tracked down a kernel patch that enabled DMA for this chipset and raised my disk I/O from 6.6Mb/sec. to 45Mb/sec. I built this kernel for both se...

Hi, I''ve a working xen 3.0.2 booting a gentoo linux on Dom0. I have setup a Windows XP in a DomU OK with no problems except the network!! My problem is that I wanted to give a working network interface on the DomU and the best I could. making the windows detect an network adapter, was putting: vif = [''type=ioemu''] I also tryied: vif = [''type=ioemu,

Hi! I?m having trubbles with the speed on my samba server, I just uppgraded to gigabit (Realtek 8169 NIC) at home when i copy stuff from the samba server i get around 5-6Mb/sec and if i use ftp to access the same file on the same server i get almost 30Mb/sec does anyone have a clue what causes this problem? When i used my old 3com 905c for the local net i got normal 100Mbit speed (around

This release fixes a BSoD on boot that some people were seeing sometimes and other people were seeing all of the time. http://www.meadowcourt.org/WindowsXenPV-0.8.4.zip James _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

This release fixes a BSoD on boot that some people were seeing sometimes and other people were seeing all of the time. http://www.meadowcourt.org/WindowsXenPV-0.8.4.zip James _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users