search for: readfully

Hi All I have a TE110P card connected to a PRI line. In my zaptel.conf I have: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us and my zapata.conf is: [channels] context=inbound-pri switchtype = national pridialplan=unknown ;pridialplan=international signalling = pri_cpe callerid=asreceived busydetect=no usecallerid=yes hidecallerid=no callwaiting=no callwaitingcallerid=no

Hi, I have a bunch of UPSs, most connected to pcs with Linux working 100% with NUT. The only one I have a problem with, is connected to Windows 7 64bit, and I used the straight MSI installed from the website named NUT-Installer-2.6.5-4.msi Took me a while to find a way to get it to work, but it is ugly for now. Just starting up the service results in a NUT not working at all, and I tracked it

Hi, I compiled the latest version of ices from cvs, but I have some problems with it. When I start it up, I only get the error "Failed to read config file "/usr/local/icecast/etc/ices.conf"" My /usr/local/icecast/etc/ices.conf looks like this: <?xml version="1.0"?> <ices:Configuration xmlns:ices="http://www.icecast.org/projects/ices">

Hello, I would like to read sets of files within a folder, perhaps using recursive methods. Right now, I rename the files before import. It would be even better to do this without renaming files, without providing explicit filenames, perhaps by importing files based on chronology, and translating each filename into a header? Please excuse my ignorance, and help cure my clunky programming

I have a collection of .csv files in a directory, and want to read them into R data.frames whose names are the same as the file names, without the .csv extension e.g., from > (files <- list.files(pattern="*.csv")) [1] "Allstar.csv" "AllstarFull.csv" [3] "Appearances.csv" "AwardsManagers.csv" [5]

Hi all, When I ran the experiments to compare an application''s execution time in both a domU (named cctest1) and a native Linux machine (named ccn10), I noticed the application executes faster in domU. The host of the domU (named ccn9) and ccn10 are two nodes of a cluster and they have same hardware configurations. domU (cctest1) is created by exporting loopback files from dom0 on

Hi guys I gave these patches a try (on top of 2.6.23-rc9 plus the previously submitted 2.6.24 patch set). The last two seem to cause Badness on my system, whereby if I start a guest (using the same bzImage as the host, as before) it seems to boot OK, and the host system still superficially looks stable (my X session is OK and I can interact with existing processes) but if I attempt to launch any

Hi guys I gave these patches a try (on top of 2.6.23-rc9 plus the previously submitted 2.6.24 patch set). The last two seem to cause Badness on my system, whereby if I start a guest (using the same bzImage as the host, as before) it seems to boot OK, and the host system still superficially looks stable (my X session is OK and I can interact with existing processes) but if I attempt to launch any

We have many servers and we are using rsync to backup them. We are using it since a month, in one of the servers since a week did start loading alot the cpu, around 50 when the normal cpu load is less than 1. The odd thing is this wasnt hapening before. Today i ran the rsync and i straced it, below i pasted part of the strace, was tracing that almost an hour before i killed the process

Hi all, I'm trying to read a data set into R, but the file is messy, so I have to do it partially. The whole data is in a .txt file, and the values are separated by a space. So far ok. The problem is that in this file, not all the lines have the same number of elements, and the reading stops. And I loose the reading of the previous lines. ex. of data set: 11 12 13 21 22 23 31 32

Hello, I used read.xlsx to read in Excel files but for large files it turned out to be not very efficient. For that reason I use a programme which writes each sheet in an Excel file into tab-delim txt files. After that I tried using read.table and read.delim to read in those txt files. Unfortunately, the results are not as expected. To show you what I mean I created a tiny Excel sheet with some

Hi all, I was trying to test ROUTE specific code with a multi-isp serviced box. There is a bug somewhere, but I''m not able to understand what the real problem is: when I issue a "shorewall show capabilities" I get: Loading /usr/share/shorewall/functions... Processing /etc/shorewall/params ... Processing /etc/shorewall/shorewall.conf... Loading Modules... Shorewall has

I have built Asterisk 1.4.4 on my Solaris 10 x86 box: LDFLAGS='-R/usr/sfw/lib -R/opt/csw/lib -L/opt/csw/lib -L/usr/sfw/lib' CPPFLAGS=-I/opt/csw/include ./configure -with-curl=/opt/csw --without-oss --without-vpb --prefix=/opt/asterisk-1.4 The build and install go fine but the asterisk executable reproducibly dumps core with a segmentation violation. If I start it as: asterisk -gc and

Hi! I don't know much about network programming, or about terminal handling. I wondered about why the command "scp file user at host:path" didn't work. It gave me the following error messages: "stdin: is not a tty" "Write failed flushing stdout buffer." "write stdout: Broken pipe" I tried it with different versions of ssh, first the newest debian

It seems like it works (partially?) with NUT/driver you mentioned. I will test it more when I return home. root at Failure:/lib/nut# ./nutdrv_qx -a test -x subdriver=fuji -u root -x productid=0000 -x vendorid=0001 -DDDDDD Network UPS Tools - Generic Q* USB/Serial driver 0.13 (2.7.2.5) USB communication driver 0.32 0.000000 debug level is '6' 0.001247 upsdrv_initups...

Hi all, When I ran the experiments to compare an application''s execution time in both a domU (named cctest1) and a native Linux machine (named ccn10), I noticed the application executes faster in domU. The host of the domU (named ccn9) and ccn10 are two nodes of a cluster and they have same hardware configurations. domU (cctest1) is created by exporting loopback files from dom0 on

> Message: 1 > Date: Tue, 15 May 2007 23:01:24 -0400 > From: Frank Tarczynski <ftarz at mindspring.com> > Subject: [asterisk-users] Asterisk 1.4.4 reproducibly dumps core on > Solaris 10 > To: asterisk-users at lists.digium.com > Message-ID: <464A7404.5000706 at mindspring.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > I have

Dear R-Users, I noticed that *read* is not a generic function. Although it could benefit from the functionality available for generic functions: read = function(file, ...) UseMethod("read") methods(read) ?# [1] read.csv???? read.csv2??? read.dcf???? read.delim read.delim2? read.DIF???? read.fortran ?# [8] read.ftable? read.fwf???? read.socket? read.table The users would still

Dear ALL, Any clues or tips for the following gdb messages. [root@localhost asterisk]# uname -a Linux localhost 2.4.22-1.2115.nptlsmp #1 SMP Wed Oct 29 15:30:09 EST 2003 i686 i686 i386 GNU/Linux localhost*CLI> show version Asterisk CVS-HEAD-09/22/04-11:19:09 built by root@localhost on a i686 running Linux [root@localhost asterisk]# gdb asterisk core.13089 GNU gdb Red Hat Linux

Hi guys, I found the troblue and fix it! I attached the patch. The trouble was in the command reply buffer use. You compute the value that value = reply[6]*256+reply[5] <- it's wrong The right solution: value = reply[5] * 256 + reply[6]; And other bug, battery.runtime compute, you divide this value 60 <- it's wrong right value: divide 1.0 I continue the work on this