search for: r720

Hi, I have HT Feature available on my Dell Server R720. Please help me understand if HT is enabled on the server, will there be a performance impact. What are the deciding factors to enable HT on the servers. Regards Kaushal

Hi, I am planning to install CentOS 6.4 on Dell R720 which has hardware raid card and 6 hard disk slots available. I have planned with the below set up :- *2 Hard disks configured in RAID 1 for installing OS * *4 Hard disks configured in RAID 10 for data drive.* Please suggest and recommend if the above approach is correct and let me know if i am...

Hi, I have updated the firmware for perc raid controller card, network card, IDRAC firmware and the BIOS version on Dell R720 server. I have installed CentOS 6.4 and updated with all the latest packages using yum -y update. # cat /var/log/messages | grep -i error Sep 23 14:09:35 x24 kernel: ERST: Error Record Serialization Table (ERST) support is initialized. Sep 23 14:09:35 x24 kernel: ACPI Error: No handler for Region...

Hi, this server, a Dell R720 has 4 bge on board, Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000 bge0: APE FW version: NCSI v1.1.7.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 ... I have connected the ethernet to port labeled 0, but it...

Package: xen-hypervisor-4.4-amd64 Version: 4.4.1-9 Severity: grave Justification: renders package unusable Hi, I was running Debian Wheezy (amd64) and xen-hypervisor 4.1 on a Dell PowerEdge R720. Xen was working fine. Xen was configured with LVM Now, I'm trying Debian Jessie (amd64) and I have a strange problem. After booting, Xen seems to be working : /etc/init.d/xen status ? xen.service - LSB: Xen daemons Loaded: loaded (/etc/init.d/xen) Active: activating (start) since sam....

On Sat, 2015-05-30 at 05:23 +0200, Beno?t Tonnerre wrote: > mai 29 23:20:50 jango xen[1150]: Starting Xen daemons: xenfs xenstored > mai 29 22:20:50 jango xen[1150]: Warning: Fake start-stop-daemon called, doing > nothing. > mai 29 23:20:50 jango xen[1150]: Warning: Fake start-stop-daemon called, doing > nothing. This suggests that the xen daemons and in particular xenstored are

I'm afraid I don't know what may or may not have happened to your installation, just that this fake-start-stop-daemon thing is very likely interfering with the operation of Xen by not actually starting daemons. I suggest you try asking somewhere like the debian-users list to see if anyone there knows what this thing is or what to do about it. Ian. On Tue, 2015-06-02 at 15:22 +0200,

Hi, Thanks for your answer. During the Debian jessie installation, I had a problem at grub step. The os-prober part was stuck : grub was at 66 % (os-prober tried to browse all the VM on LVM partitions) After more than 15 minutes, os-prober seems to be stuck, so I rebooted the server. I had to boot in rescue mode, then, reinstalled grub and modified it to add

...>> fine, but parted -l says unknown partition. Anyone have a clue it this >> will actually boot? > > parted deals with mbr and gpt partition tables, it knows nothing about > ISO9660 devices (CD/DVD format) > Ah! Thanks. Still, any idea if it'll just boot (it's a Dell R720)? mark

I''m trying to configure a DELL R720 (not a pleasant experience) which has an H710p card fitted. The H710p definitely doesn''t support JBOD, but the H310 looks like it might (the data sheet mentions non-RAID). Has anyone used one with ZFS? Thanks, -- Ian.

Now, this is one we have an issue with: it's got a bttv card, and motion running on it. It's a Dell PE R720. For some reason, it has never liked the card: 20 min after reboot, it says fatal bus error... but nothing's wrong, and it runs just fine. Well, expect that we need to keep it on the 2.6.32-431.20.3 kernel, because *everything* later, it randomly starts rebooting, several times a day. But we...

On Mon, Mar 19, 2018 at 5:57 PM, Jayme <jaymef at gmail.com> wrote: > I'm spec'ing a new oVirt build using three Dell R720's w/ 256GB. I'm > considering storage options. I don't have a requirement for high amounts > of storage, I have a little over 1TB to store but want some overhead so I'm > thinking 2TB of usable space would be sufficient. > > I've been doing some research on Micr...

Hi all, Based on the commitdiff comments, this looks like what I (and many many others) have been plagued with. Machines typically affected: DELL PowerEdge 2950, R720, R810, etc. (server class) DELL PowerEdge 960 (desktop class) Eagerly awaiting the next pre-release to test this out! : thumbs up : : thumbs up : Regards, Shantanu

Team I have a Dell PowerEdge R720xd, with the Broadcom NetXtreme bcm5720. I found the following thread: http://forums.freebsd.org/showthread.php?t=31769 I find I am unable to use the NIC's (there are 4 on the server). When we put a cable into it we get a "watchdog timeout -- resetting" error, and the machine will...

Phil Wyett wrote: > On Wed, 2016-03-23 at 09:20 -0400, m.roth at 5-cent.us wrote: >> Now, this is one we have an issue with: it's got a bttv card, and motion >> running on it. It's a Dell PE R720. For some reason, it has never liked >> the card: 20 min after reboot, it says fatal bus error... but nothing's >> wrong, and it runs just fine. Well, expect that we need to keep it on >> the 2.6.32-431.20.3 kernel, because *everything* later, it randomly starts >> reboo...

...each other. When we try do a copy, through SCP, the speed is 300mbps. And if we open another copy this speed been the half. What we are using: S.O: CentOS 7 Kernel 3.10.0-123.el7.x86_64 qemu-kvm.x86_64 10:1.5.3-60.el7 libvirt-daemon.x86_64 1.1.1-29.el7 Hardware: Dell PowerEdge R720 16GB RAM 2TB SAS Two Broadcom Corporation NetXtreme II BCM57810 10 Gigabit Command to start VM's: /usr/libexec/qemu-kvm -m 1024 -enable-kvm -k en-us -hda teste1.img -net nic,model=virtio,macaddr=00:01:02:aa:bb:cc -net tap,ifname=tap1,script=no,downscript=no -vnc :0 What Do I doing wrong? Is...

All, I am curious what is used typically for the file system replication and how do you make sure that it is consistent. So for example when using large 3TB+ sata/NL-sas drives. Is is typical to replicate three times to get similar protection to raid 6? Also what is typically done to ensure that all replicas are in place and consistent? A cron that stats of ls's the file system from a

Hi, I've just got possession of a Dell PE R720 with 2 MD1200 disk enclosures. Both MD1200 are fully populated with 12 x 3 TB disks The system will basically be a student file-server running CentOS 6.x serving various size files from small c programs to multi gigabyte audio and video files over GB ethernet. The first MD1200 will be config...

...-1. It should have at least 10 PCIe''s and will take 32 DIMMs minimum, maybe 64. And is likely to cost you less than $50K with aftermarket RAM. -- Trey On Mar 15, 2013, at 10:35 PM, Marion Hakanson <hakansom@ohsu.edu> wrote: >>> Ray said: >>>> Using a Dell R720 head unit, plus a bunch of Dell MD1200 JBODs dual pathed >>>> to a couple of LSI SAS switches. >> Marion said: >>> How many HBA''s in the R720? > Ray said: >> We have qty 2 LSI SAS 9201-16e HBA''s (Dell resold[1]). > > Sounds similar in ap...

I'm fighting a long-standing problem: we've got a Dell PE R720 with a BT878 card in it, running four surveillance cameras (it's a secure room). Since I put the card in, within 20-30 min, the box's little LCD screen goes orange, and complains "bus error" on the slot the card's in; I've moved it to different slot, no joy. Note that the...