search for: r320

Is there a way on Dell R320 (two power supplies and hardware RAID-1) on centos to get a message that a power supply is failing or that one of the hardware RAID disks is failing? Sure there is the front panel - but no-one is there ... Is that reported to linux/centos some way? This is my first R320. Thanks, Jerry

Hi, I have installed CentOS 6.4 on Dell Server R320 64bit with UEFI BIOS. Do i need both /boot and /boot/efi partitions. Please help me understand the difference between these. Regards, Kaushal

Hi all ! Thanks for the very good support of Dell R320 hardware, perc H310 is well supported, BCM5720 seems to work correctly and performances are great. The only problem i have found is very strange. The FreeBSD bootloader take many times to load, 30sec-2minutes to boot the kernel and show the bootloader menu. After that, the system boots properly, at...

This is... odd. Got a 6.8 box, a Dell R320 lspci tells me 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon] (rev 03) so it *should* accept an SAS drive. I've got a Cheetah that's a few years old, and having pulled it out of another server (in the datecenter), I put it in this box to zero it out for re...

Howdy, I built an LXC container with an "image" of asterisk 11.18 precompiled and installed. It runs fine on the dev platform, which is a Dell R320 running Ubuntu 14.04LTS. I shutdown the container, tarred it up, and untarred on a Dell PE1850, also running Ubuntu 14.04LTS. The container itself is Ubuntu 14.04LTS. Both platforms as far as I know are amd64. The container boots fine on the 1850, but trying to run asterisk segfaults. The...

I have been trying to get a feel for scaling or dimensioning using asterisk 11. if I desire to use something like a dell r320, hardware RAID, 2G E5-2420, 4G RAM and only SIP trunking using gsm (least bandwidth and no transcoding) how many calls "out" can I expect to make at one time and asterisk still be OK and responsive? Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed.....

I will be using a dell R320 Xeon E5-2420 2G and 4G RAM. also using a SIP trunk with ulaw/alaw codec. How many calls could I expect to make at the same time? no transcoding or anything. Just call a number and play a gsm file. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <h...

...ue you might want to be aware of, those with not brand new hardware. We've got a few Dell PE R415s. A 2TB b/u drive on one was getting full, so I went to replace it with a 3TB drive (a WD Red, not that it matters.) We got the system in '11. I built the drive - a GPT, 1 3TB partition, on an R320, from '12. smartctl understood it perfectly well. Anything else, not so much. parted *crashed* When I managed to force it to see it without crashing - I think I had to create a new GPT, it only saw 2199G. Put the drive back on the other box, parted complained that the "backup block"...

On 7/26/2016 2:38 PM, Peter wrote: > On 27/07/16 09:11,m.roth at 5-cent.us wrote: >> >This is... odd. Got a 6.8 box, a Dell R320 lspci tells me >> >01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 >> >[Falcon] (rev 03) >> >so it*should* accept an SAS drive. I've got a Cheetah that's a few years >> >old, and having pulled it out of another server (in the dat...

When the installer complains that it has detected unsupported hardware, is there any way to tell just what it didn't like? Following the URL in the message just ends up at the RHEL Hardware Certification page, which isn't much help. The installer seemed quite willing to continue with the installation, and poking around from the shell VT I didn't find anything that didn't seem to

Have a new TE133 in a dell R320. dahdi_cfg -vvv shows: DAHDI Tools Version - 2.9.1 DAHDI Version: 2.9.1 Echo Canceller(s): Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: Clear channel...

...t/menuselect --disable BUILD_NATIVE On Wed, Jul 1, 2015 at 1:36 PM, Jeff LaCoursiere <jeff at jeff.net> wrote: > > Howdy, > > I built an LXC container with an "image" of asterisk 11.18 precompiled and > installed. It runs fine on the dev platform, which is a Dell R320 running > Ubuntu 14.04LTS. I shutdown the container, tarred it up, and untarred on a > Dell PE1850, also running Ubuntu 14.04LTS. The container itself is Ubuntu > 14.04LTS. Both platforms as far as I know are amd64. > > The container boots fine on the 1850, but trying to run aster...

On Thu, Dec 4, 2014 at 12:32 PM, <m.roth at 5-cent.us> wrote: > Jeremy Hoel wrote: > > We noticed this when installing onto some new Dell R320's.. it might have > > something to do with hardware that the device had that the older kernel > > might not have known about. Nothing seemed wrong and everything seemed > to > > install ok (we would also update the kernel in the install process, so > > that > >...

On 27/07/16 09:11, m.roth at 5-cent.us wrote: > This is... odd. Got a 6.8 box, a Dell R320 lspci tells me > 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 > [Falcon] (rev 03) > so it *should* accept an SAS drive. I've got a Cheetah that's a few years > old, and having pulled it out of another server (in the datecenter), I put > it in this...

John R Pierce wrote: > On 7/26/2016 2:38 PM, Peter wrote: >> On 27/07/16 09:11,m.roth at 5-cent.us wrote: >>> >This is... odd. Got a 6.8 box, a Dell R320 lspci tells me >>> >01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS >>> 2008 [Falcon] (rev 03) >>> >so it*should* accept an SAS drive. I've got a Cheetah that's a few >>> years old, and having pulled it out of another server (in...

Hi folks, I've got a Dell R320 running CentOS 7, and a 10G NIC. I'm running a DNS server on it, for testing. As part of my testing, I'm attempting to capture all the DNS queries arriving on the server, using tcpdump. However, tcpdump's performance is abysmal, and it loses lots of the packets. Here's the output wh...