search for: qualifysmooth

...case. However, I don't really want to disable it if at all possible - it's a very good early warning indicator of network problems, and has often proved useful in diagnosing network faults - especially with end users' *DSL connections not provided by us. AIUI from the documentation, qualifysmoothing effectively "averages" the last two qualify results. Is there any way to increase this, so a device won't be considered unavailable until, for example, 3 consecutive qualify packets have been missed? Thanks in advance. Kind regards, Chris -- This email is made from 100% recy...

Please help. Asterisk 1: Sip.conf [VoipDirect777821] type=friend host=dfvvd.dyndns.org username=VoipDirect777821 secret=xxxxxxxxxxxx accountcode=5260477782 amaflags=billing context=Incoming disallow=all allow=g729 ;allow=alaw ;allow=ulaw trunk=no qualify=yes qualifysmoothing=yes nat=no canreinvite=yes dtmfmode=rfc2833 ;directrtpsetup=no t38pt_udptl = yes Asterisk 2 sip.conf GNU nano 1.3.12 File: sip_custom.conf [VoipDirect777821] type=friend host=141.122.139 username=VoipDirect777821 secret=wsPiOov8830 accountcode=5260477782...

...regcontext,host,ipaddr,port,defaultip,sourceaddress,mask,regexten,regseconds,accountcode,mohinterpret,mohsuggest,inkeys,outkey,language,callerid,cid_number,sendani,fullname,trunk,auth,maxauthreq,requirecalltoken,encryption,transfer,jitterbuffer,forcejitterbuffer,disallow,allow,codecpriority,qualify,qualifysmoothing,qualifyfreqok,qualifyfreqnotok,timezone,adsi,amaflags,setvar) VALUES ('admin.my.domain','friend','100','admin at my.domain','123','','default','','dynamic','10.0.100.56','26564','','','...

    Not these particular two servers. On 02/03/20 12:16, Doug Lytle wrote: >>>> I am trying to troubleshoot two Asterisk servers that have an IAX2 >>>> trunk between them. > Carlos, > > Had caller-id ever worked between these two systems? > > Doug > -- Telecomunicaciones Abiertas de México S.A. de C.V. Carlos Chávez +52 (55)8116-9161

...9/1532497439 (Unspecified) D 0 UNKNOWN The SIP settings are: [1532497439] type=friend host=dynamic username=1532497439 secret=wspiov8729 accountcode=1532497439 callerid=90002 regexten=90002 amaflags=billing context=OutboundWS disallow=all allow=g729 trunk=yes qualify=6000 qualifysmoothing=yes nat=no canreinvite=yes dtmfmode=rfc2833 directrtpsetup=no Thanks Shaun -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081029/8e0c38e8/attachment.htm

My Asterisk 13 IAX2 trunk posted below: type=friend trunk=yes allowcallerid=yes disallow=all allow=alaw allow=ulaw allow=gsm host=my.super.duper.host username=my.super.duper.username secret=my.super.duper.secret context=sip qualify=500 qualifysmoothing=yes requirecalltoken=no trunk=yes jitterbuffer=yes forcejitterbuffer=yes maxjitterbuffer=300 maxjitterinterps=100 resyncthreshold=1500 tos=ef cos=5 Doug

Hi, The iax.conf is below and the trace. Any ideas please? disallow=all allow=g729 trunk=yes qualify=yes qualifysmoothing=yes nat=yes canreinvite=yes context=OutboundWS transfer=mediaonly Executing [082449627 at private:1] Dial("SIP/919-094d6e60", "IAX2/ECom-iax/2782449627|60|") in new stack -- Called ECom-iax/2782449627 -- Call accepted by xxx.xxx.xxx.x (format g729) -- Format fo...

Hi, I think I encountered a bug in the qualify timers for IAX on asterisk 1.8 but I'd like to check if I'm not messing up in my config somewhere before reporting a bug. In my IAX peer configuration I have this: [remote-host] type=friend host=172.16.6.45 username=remote-host secret=test notransfer=yes qualify=16000 qualifyfreqnotok=30000 disallow=all allow=alaw allow=ulaw allow=ilbc

I run a phone in a remote office using the IAX2 protocol. It mostly works fine; except that every 5 mins it loses connection with Asterisk, before reconnecting 30 seconds later; rinse & repeat. Using the IAX2 debugging, I'm seeing this a lot: Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: POKE Timestamp: 00018ms SCall: 04050 DCall: 00000

Qualify=yes will send a SIP OPTIONS periodically and keep the NAT open, if you use 1 to 1 NAT (versus PAT where it is "many to one NAT") it will work because port 5060 on the private address will still be port 5060 on the public address. With PAT the port could be anything over 1024, but usually much higher, and the originator will send to port 5060, which your NAT router will drop.

...c.d ; insecure = invite insecure = very nat = never ; nat = yes port = 5060 qualify = yes qualifysmoothing = yes realm = 206.b.c.d ; realm = metaswitch regcontext = test secret = metaswitch sipdebug = yes type...

I am trying to tweak my dial plan and I am running into a problem. Sometimes my VoIP out bound calls do not complete on overseas calls(busy or just a hang-up). Is there a way in the dial plan to automatically dial out of my PRI when something like this happens. Either by time limit by a failure event? Any point in the right direction would be great Thanks, CLI output (cleansed to protect the